Graphite Nanoplates Firmly Anchored with Well-dispersed Porous Zn3V2O8 Nanospheres: Rational Fabrication and Enhanced Lithium Storage Capability

Metal-organic-framework derived Zn-V-based oxide with charge storage mechanism as high-performance anode material to enhance lithium and sodium storage

Transition metal oxides have been extensively studied due to their large theoretical capacities, but their practical application has been hampered by low electrical conductivity and dramatic volume fluctuation during cycling. In this work, we synthesized Zn3V2O8 material using Zn-V-MOF (metal-organic framework) as a sacrificial template to improve the electrochemical characteristics of lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). Unique dodecahedral structure, larger specific surface area and higher ability to mitigate volume changes, improve the electrochemical reaction active site while accelerating ion transport. Zn3V2O8 with 2-methylimidazole as a ligand demonstrated a discharge capacity of 1225.9 mAh/g in LIBs and 761.6 mAh/g in SIBs after 300 cycles at 0.2 C. Density functional theory (DFT) calculation illustrates the smaller diffusion barrier energy and higher specific capacity in LIBs that is ascribed to the fact that Li has a smaller size and hence its diffusion is easier. This study may lead to a path for the manufacturing of high-performance LIBs and SIBs.

Nickel vanadate nitrogen-doped carbon nanocomposites for high-performance supercapacitor electrode

A nickel-vanadium-based bimetallic precursor was produced using the polymerization process by urea-formaldehyde copolymers. The precursor was then calcined at 800 °C in an argon ambiance to form a Ni3V2O8-NC magnetic nanocomposite. Powerful techniques were used to study the physical characteristics and chemical composition of the fabricated Ni3V2O8-NC electrode. PXRD, Raman, and FTIR analyses proved that the crystal structure of Ni3V2O8-NC included N-doped graphitic carbon. FESEM and TEM analyses imaging showed the distribution of the Ni3V2O8 nanoparticles on the layered graphitic carbon structure. TEM images showed the prepared sample has a particle size of around 10-15 nm with an enhanced active site area of 146 m2/g, as demonstrated by BET analysis. Ni3V2O8-NC nanocomposite exhibits magnetic behaviors and a magnetization saturation value of 35.99 emu/g. The electrochemical (EC) studies of the synthesized Ni3V2O8-NC electrode proceeded in an EC workstation of three-electrode. In a 5 M potassium hydroxide as an electrolyte, the cyclic voltmeter exhibited an enhanced capacitance (CS) of 915 F/g at 50 mV/s. Galvanic charge-discharge (GCD) study also exhibited a superior capacitive improvement of 1045 F/g at a current density (It) of 10 A/g. Moreover, the fabricated Ni3V2O8-NC nanocomposite displays a good power density (Pt) of 356.67 W/kg, improved ion accessibility, and substantial charge storage. At the high energy density (Et) of 67.34 W h/kg, the obtained Pt was 285.17 W/kg. The enhanced GCD rate, cycle stability, and Et of the Ni3V2O8-NC magnetic nanocomposite nominate the sample as an excellent supercapacitor electrode. This study paves the way for developing effective, efficient, affordable, and ecologically friendly electrode materials.

Facile transfer of surface plasmon electrons of Au-NPs to Zn3V2O8 surfaces: a case study of sunlight driven H2 generation from water splitting

For future energy perspectives, an effective way to produce H2 from water splitting is suggested using Zn3V2O8 photocatalyst as a semiconductor support. Further, to enhance the catalytic efficiency and stability of the catalyst, gold metal was deposited over the Zn3V2O8 surface by a chemical reduction method. For comparison, the Zn3V2O8 and gold-fabricated catalysts (i.e., Au@Zn3V2O8) were used for water splitting reactions. For structural and optical properties, various techniques, including XRD, UV-Vis DRS, FTIR, PL, Raman, SEM, EDX, XPS and EIS were used for the characterizations. The scanning electron microscope revealed the pebble-shaped morphology of the Zn3V2O8 catalyst. The FTIR and EDX results confirmed the purity and structural and elemental composition of the catalysts. Overall, 7.05 mmol g-1 h-1 H2 generation was observed over Au1.0@Zn3V2O8, which was ten times higher than bare Zn3V2O8. The results revealed that the higher H2 activities could be attributed to the Schottky barriers and surface plasmon electrons (SPRs). Thus the Au@Zn3V2O8 catalysts have potential to deliver higher hydrogen generation than Zn3V2O8 by water splitting.

Nitrogen-doped carbon encapsulated zinc vanadate polyhedron engineered from a metal-organic framework as a stable anode for alkali ion batteries

In this work, we fabricated vanadium/zinc metal-organic frameworks (V/Zn-MOFs) derived from self-assembled metal organic frameworks, to further disperse ultrasmall Zn₂VO₄ nanoparticles and encapsulate them in a nitrogen-doped nanocarbon network (ZVO/NC) under in situ pyrolysis. When employed as an anode for lithium-ion batteries, ZVO/NC delivers a high reversible capacity (807 mAh g^-1 at 0.5 A g^-1) and excellent rate performance (372 mAh g^-1 at 8.0 A g^-1). Meanwhile, when used in sodium-ion batteries, it exhibits long-term cycling stability (7000 cycles with 145 mAh g^-1 at 2.0 A g^-1). Additionally, when employed in potassium-ion batteries, it also shows outstanding electrochemical performance with reversible capacities of 264 mAh g^-1 at 0.1 A g^-1 and 140 mAh g^-1 at 0.5 A g^-1 for 1000 cycles. The mechanism by which the pseudocapacitive behaviour of ZVO/NC enhances battery performance under a suitable electrolyte was probed, which offers useful enlightenment for the potential development of anodes of alkali-ion batteries. The performance of Zn₂VO₄ as an anode for SIBs/PIBs was investigated for the first time. This work provides a new horizon in the design ZVO/NC as a promising anode material owing to the intrinsically synergic effects of mixed metal species and the multiple valence states of V.

Zn3V3O8/NC hybrid microspheres self-assembled by layered porous nanosheets as a superior anode material for lithium/sodium-ion batteries

Zinc-vanadium oxides have been attracting increasing consideration as anode materials for lithium/sodium-ion batteries (LIBs and SIBs) recently. Present applications are hampered by issues, including their inferior electric conductivity and enormous volume variation. Herein, nitrogen-doped carbon wrapped Zn₃V₃O₈ (Zn₃V₃O₈/NC) microspheres composed of abundant nanosheets were developed as an anode material by a self-assembly strategy and subsequent surface decoration. The resulting Zn₃V₃O₈/NC porous hybrid exhibited a high specific capacity, impressive rate capability, and long-term cycling stability for both LIBs and SIBs. Notably, the superior electrochemical properties could be assigned to novel meso/microporous features, hybrid nitrogen-doped carbon, and mixed storage mechanisms.

Synthesis of nanoparticle-assembled Zn3(VO4)2 porous networks via a facile coprecipitation method for high-rate and long-life lithium-ion storage

A simple coprecipitation route followed by a calcination process was developed to prepare 2D hierarchical Zn₃(VO₄)₂ porous networks formed by the crosslinkage of monolayered nanoparticles. As a promising anode for lithium ion batteries, the electrochemical performance of Zn₃(VO₄)₂ was investigated. At a current density of 1.0 A g^-1, the Zn₃(VO₄)₂ porous networks could register a high reversible discharge capacity of 773 mA h g^-1 and the capacity retention was 94% after 700 cycles. Moreover, a remarkable reversible discharge capacity of 445 mA h g^-1 was achieved at a current density of 5 A g^-1 after 1200 cycles. Even at a higher current density of 10.0 A g^-1, a high reversible capacity of 527 mA h g^-1 could be delivered, which still remained at 163 mA h g^-1 after 1200 cycles. This superior performance is attributed to the unique 2D porous networks with a stable structure. This work shows a new avenue for facile, cheap, green, and mass production of zinc vanadate oxides with 2D porous hierarchical networks for next-generation energy conversion and storage devices.

Microwave-assisted synthesis of novel nanostructured Zn3(OH)2V2O7·2H2O and Zn2V2O7 as electrode materials for supercapacitors

Zn₃(OH)₂V₂O₇·2H₂O nanowires and nanowire-shaped Zn₂V₂O₇ synthesized through a microwave-assisted method and a successive annealing exhibited outstanding electrochemical performance.