Improved Electrocatalytic Performance of Core-shell NiCo/NiCoO with amorphous FeOOH for Oxygen-evolution Reaction

Crystalline metal phosphide-coated amorphous iron oxide-hydroxide (FeOOH) with oxygen vacancies as highly active and stable oxygen evolution catalyst in alkaline seawater at high current density

In this study, we employed a straightforward phosphorylation approach to achieve a dual objective: constructing c-a heterostructures consisting of crystalline Ni12P5 and amorphous FeOOH, while simultaneously enhancing oxygen vacancies. The resulting oxygen evolution reaction (OER) catalyst, Ni12P5/FeOOH/NF, exhibited remarkable performance with current densities of 500 mA cm-2 in both 1 M KOH and 1 M KOH + seawater, requiring low overpotentials of only 288 and 365 mV, respectively. Furthermore, Ni12P5/FeOOH/NF exhibited only a slight increase in overpotential, with increments of 18 mV and 70 mV in 1 M KOH after 15 and 150 h, and 32 mV and 108 mV in 1 M KOH + seawater at 500 mA cm-2 after 15 and 150 h, respectively. This minimal change can be attributed to the stabilized c-a structure, the protective coating of Ni12P5, and superhydrophilic. Through in-situ Raman and ex-situ XPS analysis, we discovered that Ni12P5/FeOOH/NF can undergo a reconfiguration into an oxygen vacancy-rich (Fe/Ni)OOH phase during OER process. The elevated OER activity is mainly due to the contribution of the oxygen vacancy-rich (Fe/Ni)OOH phase from the reconfigure of the Ni12P5/FeOOH/NF. This finding emphasizes the critical role of oxygen vacancies in facilitating the production of OO species and overcoming the limitations associated with OOH formation, ultimately enhancing the kinetics of the OER.

Challenges and progress in oxygen evolution reaction catalyst development for seawater electrolysis for hydrogen production

Production of green hydrogen on a large scale can negatively impact freshwater resources. Therefore, using seawater as an electrolyte in electrolysis is a desirable alternative to reduce costs and freshwater reliance. However, there are limitations to this approach, primarily due to the catalyst involved in the oxygen evolution reaction (OER). In seawater, the OER features sluggish kinetics and complicated chemical reactions that compete. This review first introduces the benefits and challenges of direct seawater electrolysis and then summarises recent research into cost-effective and durable OER electrocatalysts. Different modification methods for nickel-based electrocatalysts are thoroughly reviewed, and promising electrocatalysts that the authors believe deserve further exploration have been highlighted.

Photovoltaic amorphous feroxyhyte nanostructures synthesized by atmospheric AC microplasma

Feroxyhite (δ-FeOOH) nanomaterials were successfully synthesized through the atmospheric AC microplasma method at room temperature from ferrous sulfate aqueous solutions. Various syntheses conditions, including electric voltage, electric field strength, ferrous concentration, hydrogen peroxide concentration, and reaction duration, were systematically investigated. The synthesized products were characterized through x-ray diffraction, UV-vis absorption spectroscopy, photoluminescence spectroscopy, infra-red spectroscopy, and electron microscopy. The bandgap of the produced materials were strongly dependent of the ferrous concentration while the product ratio was dependent on all experimental conditions. The synthesis mechanism was thoroughly discussed. The synthesized nanomaterials were amorphous nanospheres, showing superparamagnetic properties at room temperature. The synthesized oxyhydroxide is a potential photovoltaic material besides its reported applications in photocatalysts and supercapacitors. The application of this synthesis technique could be extended to synthesize other oxy-hydroxide nanomaterials for renewable energy applications facilely, scalablely, cost-effectively, and environmentally.

Fabrication and Integration of Functionalized N-rGO-Ni/Ag and N-rGO-Ni/Co Nanocomposites as Synergistic Oxygen Electrocatalysts in Fuel Cells

Fabrication of composites by developing simple techniques can be an efficient way to modify the desire properties of the materials. This paper presents a detailed study on synthesis of low cost and efficient nitrogen doped reduced graphene oxide nickle-silver (N-rGO-Ni/Ag) and nickel-cobalt (N-rGO-Ni/Co) nanocomposites as electrocatalysts in fuel cell using one-pot blended reflux condensation route. An admirable correlation in the structures and properties of the synthesized nanocomposites was observed. The Oxygen Reduction Reaction (ORR) values for N-rGO-Ni/Ag and N-rGO-Ni/Co calculated from the onset potential, using Linear Sweep Voltammetry (LSV), were found to be 1.096 and 1.146. While the half wave potential were determined to be 1.046 and 1.106, respectively, N-rGO-Ni/Ag and N-rGO-Ni/Co. The Tafel and bi-functional (ORR/OER) values were calculated as 76 and 35 mV/decade and 1.23 and 1.12 V, respectively, for N-rGO-Ni/Ag and N-rGO-Ni/Co. The lower onset and half wave potential, low charge transfer resistance (Rct = 1.20 Ω/cm2) and internal solution resistance (Rs = 8.84 × 10-1 Ω/cm2), lower Tafel values (35 mV), satisfactory LSV measurements and mass activity (24.5 at 1.056 V for ORR and 54.9 at 1.056 for OER) demonstrate the remarkable electrocatalytic activity of N-rGO-Ni/Co for both ORR and OER. The chronamperometric stability for synthesized nanocomposites was found satisfactory up to 10 h.

A Cr-FeOOH@Ni-P/NF binder-free electrode as an excellent oxygen evolution reaction electrocatalyst

Refining the size of nanoparticles to exhibit larger specific surface areas and expose much more active sites is of great significance for enhancing the oxygen evolution reaction (OER) activity of the electrocatalyst, but still a tremendous challenge. Herein, a Cr-FeOOH@Ni₂P-Ni₅P₄/NF (Cr-FeOOH@Ni-P/NF) catalyst was constructed by electrodepositing a layer of CrFe oxyhydroxides on the self-grown Ni-P nanoparticles, which exhibits ultrafine nanoparticles and thus superexcellent electrocatalytic OER performance. The final catalyst affords ultra-low overpotentials of 144 mV and 210 mV to achieve current densities of 10 and 50 mA cm^-2, respectively. Meanwhile, it demonstrates robust stability for at least 80 hours with no activity decay. This strategy of refining nanoparticles on a three-dimensional electrode has once again been further demonstrated to be feasible and highly effective and opens a new door for the exploration of electrocatalysts with excellent comprehensive properties.

Synergistically coupling of Fe-doped CoP nanocubes with CoP nanosheet arrays towards enhanced and robust oxygen evolution electrocatalysis

The rational design of high-performance and low-cost oxygen evolution reaction (OER) electrocatalysts for water splitting is of vital importance for development of renewable hydrogen energy. Herein, we demonstrate an interfacial engineering strategy to prepare Fe-doped CoP nanocubes/CoP nanosheet arrays heterostructure supported on carbon cloth (denoted as CoFeP/CoP/CC). The resultant CoFeP/CoP/CC heterostructure catalyst possesses abundant heterogeneous interfaces, which enables the exposure of reaction active sites and possibly modulation of electronic structure of the catalyst. Furthermore, this strong interfacial coupling of CoFeP and CoP as well as the integration structure on the carbon cloth guarantee high electronic conductivity and enhanced mechanical stability. Benefiting from these advantages, the CoFeP/CoP/CC-heterostructure exhibits high electrocatalytic OER performance with a low overpotential of 240 mV for reaching a current density of 10 mA cm^-2, which outperforms the commercial noble metal RuO₂ (255 mV) and many reported TMPs-based electrocatalysts. Moreover, this CoFeP/CoP/CC catalyst shows a remarkable OER catalytic stability over 100 h. This work provides an effective avenue for the design of the high-performance OER catalyst by interfacial engineering strategy.

Morphology and electronic modulation of composite nanosheets for electrocatalytic oxygen evolution through partial and in situ transformation of NiFe-LDH

Developing new strategies for constructing highly efficient electrocatalyst is still of great significance for renewable energy conversion.

Vertically aligned FeOOH nanosheet arrays on alkali-treated nickel foam as highly efficient electrocatalyst for oxygen evolution reaction

The adverse effects caused by global climate warming continue to be a great impetus to develop electrocatalytic water splitting technology for hydrogen source production. However, there is an urgent necessity but it is still a significant challenge to explore electrocatalysts with excellent performance, low cost, and environmental benignity for expediting the oxygen evolution reaction (OER) owing to the sluggish reaction kinetics. Fe-based materials, especially FeOOH, have great potential as OER electrocatalysts but suffers from poor electrical conductivity. Herein, we rationally designed and successfully synthesized FeOOH nanosheet arrays supported on alkali-treated nickel foam (FeOOH NSAs/ATNF) and applied it as an electrocatalyst toward OER. The FeOOH NSAs/ATNF catalyst exhibited outstanding performance with small overpotential, fast kinetics and superior stability in alkaline medium. Our research opens up a facile and effective approach to develop cost-effective and high-performance electrocatalysts for energy conversion, especially for these Fe-based materials with poor electrical conductivity.

Alkaline water-splitting reactions over Pd/Co-MOF-derived carbon obtained via microwave-assisted synthesis

Cobalt-based metal-organic framework-derived carbon (MOFDC) has been studied as a new carbon-based support for a Pd catalyst for electrochemical water-splitting; i.e., the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline medium. The study shows a high increase in the HER activity, in terms of low onset overpotential (onset η = 35 mV vs. RHE), high exchange current density (j o,s ≈ 0.22 mA cm-2), high mass activity (j o,m ≈ 59 mA mg-1), high kinetic current (j K ≈ 5-8 mA cm-2) and heterogeneous rate constant (k 0 ≈ 4 × 10-4 cm s-1), which are attributed to the high porosity of MOFDC and contribution from residual Co, while the large Tafel slope (b c = 261 mV dec-1) is ascribed to the high degree of hydrogen adsorption onto polycrystalline Pd as a supplementary reaction step to the suggested Volmer-Heyrovsky mechanism. These values for the catalyst are comparable to or better than many recent reports that adopted nano-carbon materials and/or use bi- or ternary Pd-based electrocatalysts for the HER. The improved HER activity of Pd/MOFDC is associated with the positive impact of MOFDC and residual Co on the Pd catalyst (i.e., low activation energy, E A ≈ 12 kJ mol-1) which allows for easy desorption of the Hads to generate hydrogen. Moreover, Pd/MOFDC displays better OER activity than its analogue, with lower onset η (1.29 V vs. RHE) and b a (≈78 mV dec-1), and higher current response (ca. 18 mA cm-2). Indeed, this study provides a new strategy of designing and synthesizing MOFDC with physico-chemical features for Pd-based electrocatalysts that will allow for efficient electrochemical water-splitting processes.

Recent Progress in Two-Dimensional Layered Double Hydroxides and Their Derivatives for Supercapacitors

High-performance supercapacitors have attracted great attention due to their high power, fast charging/discharging, long lifetime, and high safety. However, the generally low energy density and overall device performance of supercapacitors limit their applications. In recent years, the design of rational electrode materials has proven to be an effective pathway to improve the capacitive performances of supercapacitors. Layered double hydroxides (LDHs), have shown great potential in new-generation supercapacitors, due to their unique two-dimensional layered structures with a high surface area and tunable composition of the host layers and intercalation species. Herein, recent progress in LDH-based, LDH-derived, and composite-type electrode materials targeted for applications in supercapacitors, by tuning the chemical/metal composition, growth morphology, architectures, and device integration, is reviewed. The complicated relationships between the composition, morphology, structure, and capacitive performance are presented. A brief projection is given for the challenges and perspectives of LDHs for energy research.

Engineering the coupling interface of rhombic dodecahedral NiCoP/C@FeOOH nanocages toward enhanced water oxidation

Hydrogen, regarded as one of the most promising green and sustainable energy resources, could be generated by splitting water with electrochemical methods. The challenge for efficient hydrogen generation is the sluggish kinetics at the anodes for the oxygen evolution reaction (OER). Here, a novel catalyst with remarkably enhanced OER activity was prepared by coupling FeOOH and NiCoP/C. The enhanced OER activity of the hybrid catalyst should be ascribed to the synergistic effect of the individual components. First, NiCoP/C derived from ZIF-67 with a hollow rhombic dodecahedral architecture not only allows exposure of numerous active sites but also provides high conductivity. Second, the re-localization of electrons at the coupling interface optimizes the adsorption/desorption nature of intermediate oxygenated species and imparts a high OER activity. The hybrid NiCoP/C@FeOOH catalyst exhibits very high OER activity with a low overpotential of 271 mV for producing a current density of 10 mA cm^-2 in 1 M KOH aqueous solution, markedly surpassing the individual counterparts of pure NiCoP/C nanocages and bare FeOOH. This work represents a universal strategy for boosting the OER kinetics of catalysts and pushing boundaries for high-efficiency water oxidation.

Recent Progresses in Electrocatalysts for Water Electrolysis

Abstract

The study of hydrogen evolution reaction and oxygen evolution reaction electrocatalysts for water electrolysis is a developing field in which noble metal-based materials are commonly used. However, the associated high cost and low abundance of noble metals limit their practical application. Non-noble metal catalysts, aside from being inexpensive, highly abundant and environmental friendly, can possess high electrical conductivity, good structural tunability and comparable electrocatalytic performances to state-of-the-art noble metals, particularly in alkaline media, making them desirable candidates to reduce or replace noble metals as promising electrocatalysts for water electrolysis. This article will review and provide an overview of the fundamental knowledge related to water electrolysis with a focus on the development and progress of non-noble metal-based electrocatalysts in alkaline, polymer exchange membrane and solid oxide electrolysis. A critical analysis of the various catalysts currently available is also provided with discussions on current challenges and future perspectives. In addition, to facilitate future research and development, several possible research directions to overcome these challenges are provided in this article.

Graphical Abstract