Uniformly electrodeposited α-MnO2 film on super-aligned electrospun carbon nanofibers for a bifunctional catalyst design in oxygen reduction reaction

Electrodeposited Manganese Dioxides and Their Composites as Electrocatalysts for Energy Conversion Reactions

Enhancing the efficiencies of electrochemical reactions for converting renewable energy into clean chemical fuels as well as generating clean energy is critical to achieving carbon neutrality. However, this enhancement can be achieved using materials that are not constrained by resource limitations and those that can be converted into devices in a scalable manner, preferably for industrial applications. This review explores the applications of electrochemically deposited manganese dioxides (MnO2) and their composites as electrochemical catalysts for oxygen evolution (OER) and hydrogen evolution reactions for converting renewable energy into chemical fuels. It also explores their applications as electrochemical catalysts for oxygen reduction reaction (ORR) and bifunctional OER/ORR for the efficient operation of fuel cells and metal-air batteries, respectively. Manganese is the second most abundant transition metal in the Earth's crust, and electrodeposition represents a binder-free and scalable technique for fabricating devices (electrodes). To propose an improved catalyst design, the studies on the electrodeposition mechanism of MnO2 as well as the fabrication techniques for MnO2-based nanocomposites accumulated in the development of electrodes for supercapacitors are also included in this review.

Investigation of the Defect and Intensity-Dependent Optical Limiting Performance of MnO2 Nanoparticle-Filled Polyvinylpyrrolidone Composite Nanofibers

To enhance the optical limiting behavior triggered by nonlinear absorption (NA), wide-band gap MnO2 nanoparticles were incorporated into polyvinylpyrrolidone (PVP) polymer nanofibers at various concentrations. SEM images of the composite nanofibers showed that MnO2 nanoparticles are well entrapped in the nanofibers. With an increase in MnO2 nanofiller concentration, a widened optical band gap energy and an increased Urbach energy were observed. As the concentration of MnO2 nanofiller in PVP increased, the NA behavior became more pronounced but weakened with higher input intensity. This behavior was attributed to the filling of the localized defect states by one photon absorption (OPA). The NA mechanisms of the composite nanofibers were examined, considering their band gap energies and localized defect states. Although all of the composite nanofibers had OPA, sequential/simultaneous two photon absorption (TPA), and excited state absorption mechanisms, the higher concentration of the MnO2 nanofiller led to stronger NA behavior due to its more defective structure. The highest optical limiting behavior was observed for composite nanofibers with the highest concentration of MnO2 nanofiller. The results obtained show that these composite nanofibers with a high linear transmittance and an extended band gap energy can be used in optoelectronic applications that can operate in a wide spectral range. Furthermore, their robust NA behavior, coupled with their promising optical limiting characteristics, positions them as strong contenders for effective optical limiting applications.

Size effect of γ-MnO2 precoated anode on lead-containing pollutant reduction and its controllable fabrication in industrial-scale for zinc electrowinning

Lead (Pb) is the most widely used anode in zinc (Zn) electrowinning and other metallurgical industries. The resource loss and environmental pollution caused by Pb anode corrosion are urgent problems to be solved. A γ-MnO₂ precoated anode was prepared successfully to reduce the Pb-containing pollutant. The size effects with its controllable preparation on an industrial scale were studied. Severe nonuniform distribution of γ-MnO₂ film was observed with curbing the reduction of anode slime only 68%, when anode size increased from lab to industry. Nonuniform rate (R) and average thickness (d) were found to be the key indicators to determine the film structure distribution and their performance differences, which were random and difficult to be controlled in scale-up size. However, a controllable industrial γ-MnO₂ precoated anodes (IMPA) fabricated through optimized current density (J₀) and electrodeposition time (t) in our developed film-forming system. Then, the long-term performances of two IMPA with different indicators (IMPA-1: R = 34%, d = 108 μm, IMPA-2: R = 23%, d = 55 μm) were compared with the industrial typical Pb-based anode (ITPA). Of the three different anodes, the optimized IMPA-2 displayed the best performance. Within 24 d of electrowinning cycle, the corrosion inhibition effect and the anode slime reduction rate for IMPA-2 improved by 56% and 30% than IMPA-1, and improved by 100% and 91% than ITPA. Furthermore, the mechanism analysis of size effect change showed that R of IMPA was contributed to the local gas holdup distribution along the anode. Controlled size effect of uniform oxide film will have a future application prospect for the sustainability of industry, which provides an important cleaner production of Zn electrowinning and related hydrometallurgy industries.

Recent Progresses in Oxygen Reduction Reaction Electrocatalysts for Electrochemical Energy Applications

Abstract

Electrochemical energy storage systems such as fuel cells and metal–air batteries can be used as clean power sources for electric vehicles. In these systems, one necessary reaction at the cathode is the catalysis of oxygen reduction reaction (ORR), which is the rate-determining factor affecting overall system performance. Therefore, to increase the rate of ORR for enhanced system performances, efficient electrocatalysts are essential. And although ORR electrocatalysts have been intensively explored and developed, significant breakthroughs have yet been achieved in terms of catalytic activity, stability, cost and associated electrochemical system performance. Based on this, this review will comprehensively present the recent progresses of ORR electrocatalysts, including precious metal catalysts, non-precious metal catalysts, single-atom catalysts and metal-free catalysts. In addition, major technical challenges are analyzed and possible future research directions to overcome these challenges are proposed to facilitate further research and development toward practical application.

Graphic Abstract

Controllable Hortensia-like MnO2 Synergized with Carbon Nanotubes as an Efficient Electrocatalyst for Long-Term Metal-Air Batteries

The exploitation of a high-activity and low-cost bifunctional catalyst for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) as the cathode catalyst is a research priority in metal-air batteries. Herein, a novel bifunctional hybrid catalyst of hortensia-like MnO₂ synergized with carbon nanotubes (CNTs) (MnO₂/CNTs) is controllably synthesized by reasonably designing the crystal structure and morphology as well as electronic arrangement. On the basis of these strategies, the hybrid accelerates the reaction kinetics and avoids the change of structures. As expected, MnO₂/CNTs exhibit a remarkable ORR and OER activity [low ORR Tafel slope: 71 mV dec^-1, low OER Tafel slope: 67 mV dec^-1, and small potential difference (Δ E): 0.85 V] and a long-term stability, which should be attributed to its unique morphology, K⁺ ions in the 2 × 2 tunnels, and synergistic effect between MnO₂ and CNTs. Notably, in zinc-air batteries (ZABs), aluminum-air batteries (AABs), and magnesium-air batteries (MABs), the composite shows high power density (ZABs: 243 mW cm^-2, AABs: 530 mW cm^-2, and MABs: 614 mW cm^-2) and large specific capacities (793 mA h g_Zn^-1, 918 mA h g_Al^-1, and 878 mA h g_Mg^-1). Importantly, the rechargeable ZABs reveal small charge-discharge voltage drop (0.81 V) and strong cycle durability (500 h), which are better than the noble-metal Pt/C + IrO₂ mixture catalyst (the voltage drop: 1.15 V at first and 2 V after 100 h). These superior performances together with the simple synthetic method of the hybrid reveal great promise in large-power energy storage and conversion equipment.

Antioxidant Capacity of Nitrogen and Sulfur Codoped Carbon Nanodots

Carbon nanodots (CNDs) have shown potential for antioxidative activity at the cellular level. Here we applied a facile hydrothermal method to prepare fluorescent nitrogen and sulfur (N,S-)codoped CNDs using α-lipoic acid, citric acid, and urea as precursor molecules. This work describes a comprehensive study for exploring their antioxidation activity using UV-vis absorption and electrochemistry measurements of 2,2-diphenyl-1-picrylhydrazyl radical (DPPH•), as well as a lucigenin chemiluminescence (lucigenin-CL) assay. The lucigenin-CL assay detects superoxide anion radicals, i.e., reactive oxygen species (ROS) produced through the xanthine/xanthine oxidase (XO) reaction. The electrochemically derived relationship between the unreacted nitrogen-centered DPPH• and CND concentrations agrees with that obtained from UV-vis measurements. A reaction pathway for the ROS antioxidative reaction of N,S-codoped CNDs is proposed. These findings should aid in the development of N,S-codoped CNDs for practical use in biomedical applications.

Magnetic Field-Enhanced 4-Electron Pathway for Well-Aligned Co3 O4 /Electrospun Carbon Nanofibers in the Oxygen Reduction Reaction

The sluggish reaction kinetics of the oxygen reduction reaction (ORR) has been the limiting factor for fuel energy utilization, hence it is desirable to develop high-performance electrocatalysts for a 4-electron pathway ORR. A constant low-current (50 μA) electrodeposition technique is used to realize the formation of a uniform Co₃ O₄ film on well-aligned electrospun carbon nanofibers (ECNFs) with a time-dependent growth mechanism. This material also exhibits a new finding of mT magnetic field-induced enhancement of the electron exchange number of the ORR at a glassy carbon electrode modified with the Co₃ O₄ /ECNFs catalyst. The magnetic susceptibility of the unpaired electrons in Co₃ O₄ improves the kinetics and efficiency of electron transfer reactions in the ORR, which shows a 3.92-electron pathway in the presence of a 1.32 mT magnetic field. This research presents a potential revolution of traditional electrocatalysis by simply applying an external magnetic field on metal oxides as a replacement for noble metals to reduce the risk of fuel-cell degradation and maximize the energy output.

Fabrication and high ORR performance of MnOx nanopyramid layers with enriched oxygen vacancies

MnO_x nanopyramids with enriched OVs vertically grown on nitrogen doped carbon microlaminate arrays with narrow spacing yield a high ORR performance.