One-step stabilizer-free synthesis of porous bimetallic PdCu nanofinger supported on graphene for highly efficient methanol electro-oxidation

PdPtCu mesoporous nanocube-based electrochemical sandwich immunosensor for detection of HIV-p24

The construction of simple, stable, low-cost and reproducible enzyme-free electrochemical biosensors can effectively avoid the problem of signal attenuation caused by enzyme inactivation. Hererin, we prepared a novel nanoenzymes PdPtCu mesoporous nanocubes (MNCs) to construct a label-free sandwich electrochemical immunosensor for the highly sensitivity detection of HIV-p24. PdPtCu MNCs have excellent peroxidase activity against hydrogen peroxide (H2O2) due to their synergistic ternary composition, large surface area and ability to penetrate mesoporous channels. Moreover, highly conductive and biocompatible gold nanoparticles@graphene oxide (AuNPs@GO) was introduced as a substrate to modify a glassy carbon electrode (GCE). Owing to the excellent electrochemical performance of the PdPtCu MNCs and AuNPs@GO, the developed immunosensors exhibited a good linear response from 0.04 pg/mL to 100 ng/mL with a low detection limit of 20 fg/mL. In addition, the established method exhibited excellent practical performance in human serum. This novel strategy provides a promising platform for ultrasensitive detection of the HIV-p24 in the field of clinical diagnostics.

Breaking with the Principles of Coreduction to Form Stoichiometric Intermetallic PdCu Nanoparticles

Intermetallic nanoparticles (NPs) have shown enhanced catalytic properties as compared to their disordered alloy counterparts. To advance their use in green energy, it is crucial to understand what controls the formation of intermetallic NPs over alloy structures. By carefully selecting the additives used in NP synthesis, it is here shown that monodisperse, intermetallic PdCu NPs can be synthesized in a controllable manner. Introducing the additives iron(III) chloride and ascorbic acid, both morphological and structural control can be achieved. Combined, these additives provide a synergetic effect resulting in precursor reduction and defect-free growth; ultimately leading to monodisperse, single-crystalline, intermetallic PdCu NPs. Using in situ X-ray total scattering, a hitherto unknown transformation pathway is reported that diverges from the commonly reported coreduction disorder-order transformation. A Cu-rich structure initially forms, which upon the incorporation of Pd(0) and atomic ordering forms intermetallic PdCu NPs. These findings underpin that formation of stoichiometric intermetallic NPs is not limited by standard reduction potential matching and coreduction mechanisms, but is instead driven by changes in the local chemistry. Ultimately, using the local chemistry as a handle to tune the NP structure might open new opportunities to expand the library of intermetallic NPs by exploiting synthesis by design.

Surfactant-Free Monodispersed Pd Nanoparticles Template for Core-Shell Pd@PdPt Nanoparticles as Electrocatalyst towards Methanol Oxidation Reaction (MOR)

An eco-friendly two-step synthetic method for synthesizing Pd@PdPt/CNTs nanoparticles was introduced and studied for the methanol oxidation reaction. The Pd@PdPt alloy core-shell structure was synthesized by preparing a surfactant-free monodispersed Pd/CNTs precursor through the hydrolysis of tetrachloropalladate (II) ion ([PdCl₄]²⁻) in the presence of carbon nanotubes (CNTs) and the subsequent hydrogen reduction and followed by a galvanic replacement reaction. This method opens up an eco-friendly, practical, and straightforward route for synthesizing monometallic or bimetallic nanoparticles with a clean surfactant-free electrocatalytic surface. It is quite promising for large-scale preparation. The Pd@PdPt/CNTs electrocatalyst demonstrated a high specific mass activity for methanol oxidation (400.2 mAmg_Pt⁻¹) and excellent stability towards direct methanol oxidation compared to its monometallic counterparts.

Applications of bimetallic PdCu catalysts

Bimetallic PdCu nanoparticles can be applied as catalysts in a wide range of chemical and electrochemical reactions.

Ir-Alloyed Ultrathin Ternary PdIrCu Nanosheet-Constructed Flower with Greatly Enhanced Catalytic Performance toward Formic Acid Electrooxidation

Ternary metal-element alloys have been reported as efficient electrocatalysts toward various electrochemical reactions, but a unique three-dimensional (3D) Ir-alloyed ternary nanosheet-composed flower (NCF) structure has not been explored yet. Herein, an innovated 1.8 nm Ir-alloyed ultrathin ternary PdIrCu NCF structure is synthesized via one-pot solvothermal reduction without using any surfactant. The as-prepared PdIrCu/C NCF catalyst remarkably improves the stability than commercial Pd/C toward formic acid electrooxidation while resulting in significantly increased mass activity. The improvement of electrocatalytic properties depends on the introduction of Ir and Cu atoms, which greatly prevented poisoning from CO while modifying the electronic structure of Pd for increased reaction active sites and accelerated charge-transfer rate as well as facilitated mass transport by ultrathin NCF 3D structure. Therefore, this catalyst possesses a promising application prospect in electrochemical energy storage/conversion systems.

Synthesis and evaluation of water soluble pH sensitive poly (vinyl alcohol)-doxorubicin conjugates

The accuracy of spatiotemporal control cargo delivery and release are primordial to enhance the therapeutic efficiency and decrease the undesirable effects, in this context a novel prodrug were developed based on biocompatible polyvinyl alcohol (PVA) substrate. PVA was conjugated to doxorubicin (PVA-DOX) via an acid-labile hydrazone linkage. PVA was first functionalized with acidic groups, then reacted with hydrazine hydrate to form an amide bond. The amine group of PVA hydrazide was linked to carbonyl group (C = O) of DOX to form a pH sensitive hydrazone bond. The molecular structure of the PVA-DOX was confirmed by FTIR, XPS, and ¹H-NMR analysis methods. The degree of grafting were evaluated by TGA and confirmed by XPS, which reveals the successful bond attachment of DOX to PVA. Our findings confirm pH dependent DOX release from PVA-DOX prodrug with faster release rate in acidic environment (pH 5.0, pH 6.0) and slower release rate in neutral pH environment (pH 7.4). Compared to the primary DOX, our synthesized PVA-DOX conjugates could exhibit a promising therapeutic effect, high biocompatibility and zero premature release. The results prove the successful synthesis of PVA-DOX conjugates with high efficiency.

Understanding small-molecule electro-oxidation on palladium based compounds – a feature on experimental and theoretical approaches

Electrochemical oxidation of small molecules such as ethanol, methanol and formic acid on Pd based compounds has a great impact on green energy production in fuel cells.

Shape-control of super-branched Pd–Cu alloys with enhanced electrocatalytic performance for ethylene glycol oxidation

Pd–Cu alloys with adjustable morphologies were synthesized and examined as nanocatalysts for electro-oxidation of ethylene glycol.