Rose flower-like nitrogen-doped NiCo2O4/carbon used as cathode electrocatalyst for oxygen reduction in air cathode microbial fuel cell

Exploring the Potential of Heteroatom-Doped Graphene Nanoribbons as a Catalyst for Oxygen Reduction

In this study, we created a series of N, S, and P-doped and co-doped carbon catalysts using a single graphene nanoribbon (GNR) matrix and thoroughly evaluated the impact of doping on ORR activity and selectivity in acidic, neutral, and alkaline conditions. The results obtained showed no significant changes in the GNR structure after the doping process, though changes were observed in the surface chemistry in view of the heteroatom insertion and oxygen depletion. Of all the dopants investigated, nitrogen (mainly in the form of pyrrolic-N and graphitic-N) was the most easily inserted and detected in the carbon matrix. The electrochemical analyses conducted showed that doping impacted the performance of the catalyst in ORR through changes in the chemical composition of the catalyst, as well as in the double-layer capacitance and electrochemically accessible surface area. In terms of selectivity, GNR doped with phosphorus and sulfur favored the 2e- ORR pathway, while nitrogen favored the 4e- ORR pathway. These findings can provide useful insights into the design of more efficient and versatile catalytic materials for ORR in different electrolyte solutions, based on functionalized carbon.

Bimetal-MOF and bacterial cellulose-derived three-dimensional N-doped carbon sheets loaded Co/CoFe nanoparticles wrapped graphite carbon supported on porous carbon nanofibers: An efficient multifunctional electrocatalyst for Zn-air batteries and overall water splitting

In this work, a three-dimensional (3D) multifunctional Co/CoFeNC@N-CNF electrocatalyst was first synthesized by the pyrolysis of a CoFe bimetal-centred metal-organic framework (MOF) and bacterial cellulose (BC). The initial potential and half-wave potential of Co/CoFeNC@N-CNF can reach 0.99 V and 0.8 V. Low overpotentials of 320 mV and 155 mV are purely required for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) at a current density of 10 mA cm^-2, respectively. The electrochemical performance of Co/CoFeNC@N-CNF exceeds most bimetal-MOF-derived electrocatalysts reported to date. The superior electrochemical performance is mainly due to abundant active sites, high-efficiency electrochemical performance, and high electron transport efficiency. In addition, the theoretical calculation results show that the synergistic effect of the CoFe bimetal can optimize the adsorption energy for intermediates of the oxygen reduction reaction (ORR), OER and HER. Furthermore, we assembled a mold and solid Zn-air battery using the catalyst as an air cathode catalyst, demonstrating the maximum power densities of 292 mW cm^-2 and 178 mW cm^-2. The 3D structure electrocatalysts derived from the MOF and bacterial cellulose provide an innovative and instructive approach for the design of diverse energy nanomaterials.

Innovative Cost-Effective Nano-NiCo2O4 Cathode Catalysts for Oxygen Reduction in Air-Cathode Microbial Electrochemical Systems

Microbial electrochemical systems (MESs) can harvest bioelectricity from varieties of organic matter in wastewater through electroactive microorganisms. Oxygen reduction reaction (ORR) in a cathode plays an important role in guaranteeing high power generation, which can be enhanced by cathode catalysts. Herein, the tiny crystalline grain nanocrystal NiCo₂O₄ is prepared via the economic method and utilized as an effective catalyst in air-cathode MESs. The linear sweep voltammetry results indicate that the current density of 2% nano-NiCo₂O₄/AC cathode (5.05 A/m²) at 0 V increases by 20% compared to the control (4.21 A/m²). The cyclic voltammetries (CVs) and the electrochemical impedance spectroscopy (EIS) showed that the addition of nano-NiCo₂O₄ (2%) is efficient in boosting the redox activity. The polarization curves showed that the MESs with 2% nano-NiCo₂O₄/AC achieved the highest maximum power density (1661 ± 28 mW/m²), which was 1.11 and 1.22 times as much as that of AC and 5% nano-NiCo₂O₄. Moreover, the adulteration of nano-NiCo₂O₄ with a content of 2% can not only enable the electrical activity of the electrode to be more stable, but also reduce the cost for the same power generation in MESs. The synthetic nano-NiCo₂O₄ undoubtedly has great benefits for large-scale MESs in wastewater treatment.

Single-Chamber Microbial Fuel Cell with Multiple Plates of Bamboo Charcoal Anode: Performance Evaluation

In this study, three single-chamber microbial fuel cells (MFCs), each having Pt-coated carbon cloth as a cathode and four bamboo charcoal (BC) plates as an anode, were run in a fed-batch mode, individually and in series. Simulated potato-processing wastewater was used as a substrate for supporting the growth of a mixed bacterial culture. The maximum power output increased from 0.386 mW with one MFC to 1.047 mW with three MFCs connected in series. The maximum power density, however, decreased from 576 mW/m2 (normalized to the cathode area) with one MFC to 520 mW/m2 with three MFCs in series. The experimental results showed that power can be increased by connecting the MFCs in series; however, choosing low resistance BC is crucial for increasing power density.

Co8FeS8 wrapped in Auricularia-derived N-doped carbon with a micron-size spherical structure as an efficient cathode catalyst for strengthening charge transfer and bioelectricity generation

The main issues regarding the practical application of microbial fuel cells (MFCs) are the poor activity and tolerance of oxygen reduction reaction (ORR) catalysts in wastewater. In this study, Auricularia chelated with Co, Fe and S ions is used as a nitrogen (N)-enriched carbon source to prepare N-doped bimetallic sulfide (Co₈FeS₈)-embedded carbon spheres (Co₈FeS₈/NSC) using a hydrothermal method. The effects of various temperatures (800-950 °C) on the structure and catalytic activity of Co₈FeS₈/NSC catalysts are investigated. The MFC with a Co₈FeS₈/NSC (900 °C) cathode obtained the maximum power density of 1.002 W m^-2, which is higher than that of Pt/C (0.88 W m^-2). After 1440 h of operation, the power density of the Co₈FeS₈/NSC (900 °C) cathode only declined by 5.49%, indicating that the Co₈FeS₈ activity, charge transfer and O₂ transport were slightly influenced by the attached microbes and poisonous substances in the wastewater. The electrochemical results indicate that Co₈FeS₈/NSC (900 °C) mainly proceeds by a 4e^- ORR pathway, indicating that Co₈FeS₈ (Co²⁺ and Fe²⁺) wrapped in NSCs (carbon spheres) can trigger synergistic effects to provide more active sites and high electrical conductivity to achieve the rapid kinetics required for the ORR. Moreover, the porous structures of the NSCs (220.97 m² g^-1) with incorporated pyridinic N, pyrrolic N and graphitic N can provide abundant available channels for O₂ and OH^- transport to ensure the preferential accessibility of the reactant molecules to active sites. This indicates that Auricularia-derived Co₈FeS₈/NSC catalysts have great potential as alternatives for precious metal-based catalysts in neutral electrolyte MFCs.

Multifunctional Electrocatalysis on a Porous N-Doped NiCo2O4@C Nanonetwork

Developing a multifunctional electrocatalyst with eminent activity, strong durability, and cheapness for the hydrogen/oxygen evolution reaction (HER/OER) and oxygen reduction reaction (ORR) is critical to overall water splitting and regenerative fuel cells. Herein, a nitrogen-doped nanonetwork assembled by porous and defective NiCo₂O₄@C nanowires grown on nickel foam (N-NiCo₂O₄@C@NF) is crafted via biomimetic mineralization and following carbonization of phase-transited lysozyme (PTL)-coupled NiCo₂O₄. The as-obtained N-NiCo₂O₄@C@NF electrocatalysts exhibit an exceptional catalytic activity with ultralow overpotentials for the HER (42 mV) and OER (242 mV) to afford 10 mA cm^-2 while maintaining good stability in alkaline media. Meanwhile, the N-NiCo2O4@C electrocatalysts presents a superior catalytic activity for ORR and a favorable four-electron pathway. The unprecedented catalytic performance arises from a highly porous structure and abundant defects and synergistic effects of components. This work may offer a new possibility in the exploration of multifunctional electrocatalysts for various energy-related electrocatalytic reactions.

Low-cost nanowired α-MnO2/C as an ORR catalyst in air-cathode microbial fuel cell

In this work, low cost α-MnO₂ nanowires and α-MnO₂ nanowires supported on carbon Vulcan (α-MnO₂/C) have been synthesized via a simple and facile hydrothermal method for application in microbial fuel cells. The prepared samples have been characterized by X-ray diffraction (XRD), Raman spectroscopy and field emission scanning electron microscopy (FE-SEM). Electrocatalytic activities of the samples have been evaluated by means of cyclic voltammetry (CV), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) in a neutral phosphate buffer solution. EIS was performed at different potentials to gain further insight into the kinetic properties of α-MnO₂/C. Both catalysts were used in air cathode microbial fuel cells to achieve power densities of 180 and 111 mWm^-2 for α-MnO₂/C and pristine α-MnO₂ nanowires, respectively. α-MnO2/C functions as a good and economical alternative for Pt free catalysts in practical MFC applications, as shown by the findings of stability test and voltage generation cycles in long-term operation of MFC.