MOF-mediated synthesis of monodisperse Co(OH)2 flower-like nanosheets for enhanced oxygen evolution reaction

Strong electronic interaction enhanced electrocatalysis of copper phthalocyanine decorated Co-MOF-74 toward highly efficient oxygen evolution reaction

Metal-organic frameworks (MOFs) have been identified as promising electrocatalysts for the oxygen evolution reaction (OER). However, most of the reported MOFs have low electrical conductivity and poor stability, and therefore addressing these problems is crucial for achieving higher electrocatalytic performance. Meanwhile, direct observations of the electrocatalytic behavior, which is of great significance to the understanding of the electrocatalytic mechanism, remain highly challenging. Here, we report on a significant electrocatalytic performance enhancement of Co-MOF-74 for the OER after decoration by copper phthalocyanine (CuPc) molecules. Co-MOF-74@CuPc, synthesized by solvothermal reactions, displays a low overpotential of 293 mV and a robust long-term stability (70 h) at 10 mA cm-2. The enhancement has been attributed to strong electronic interaction between the π-conjugated CuPc molecule and Co-MOF-74, which promotes the electron transfer, increases the electrocatalytic active surface area and regulates the electronic structure during the OER process.

A two dimensional Co(OH)2 catalytic gravity-driven membrane for water purification: a green and facile fabrication strategy and excellent water decontamination performance

Cobalt-based materials are reported to be the most efficient catalysts in sulfate radical advanced oxidation processes (SR-AOPs). A green and facile method was developed in this work to prepare uniform Co(OH)2 hexagonal nanosheets, which was void of any organic solvents via mere ambient temperature stirring. The obtained nanosheets were assembled into a catalytic gravity-driven membrane, through which the removal efficiency of a typical pharmaceutical contaminant, ranitidine (RNTD), could reach ∼100% within 20 min. Meanwhile, the catalytic membrane also demonstrated effective removal performance towards various pollutants. In order to augment the long-term stability of catalytic membranes, Co(OH)2/rGO composites were fabricated using the same strategy, and a Co(OH)2/rGO catalytic membrane was prepared correspondingly. The Co(OH)2/rGO membrane could maintain a ∼100% removal of RNTD over a constant reaction period lasting for up to 165 hours, which was approximately 11 times that of the sole Co(OH)2 membrane (15 h). Analysis of element chemical states, metal ion concentration in filtrates, and quenching experiments suggested that the combination with rGO could promote the electron transfer to accelerate the Co(II) regeneration, restrain the cobalt dissolution to alleviate the active site loss, and contribute to the production of 1O2via synergistic effects of oxygen-containing groups in rGO. Toxicity assessment was performed on RNTD and its degradation intermediates to confirm the reduction in ecotoxicity of the treated feed. Overall, this work not only offered guidance for the application of nanosheets in AOP membranes, but also had implications for the environmentally-friendly preparation protocol to obtain functional metal hydroxides.

In Situ Formation of Surface-Induced Oxygen Vacancies in Co9S8/CoO/NC as a Bifunctional Electrocatalyst for Improved Oxygen and Hydrogen Evolution Reactions

Creating oxygen vacancies and introducing heterostructures are two widely used strategies in Co-based oxides for their efficient electrocatalytic performance, yet both strategies have rarely been used together to design a bifunctional electrocatalyst for an efficient overall water splitting. Herein, we propose a facile strategy to synthesize oxygen-defect-rich Co9S8/CoO hetero-nanoparticles with a nitrogen-doped carbon shell (ODR-Co9S8/CoO/NC) through the in situ conversion of heterojunction along with surface-induced oxygen vacancies, simply via annealing the precursor Co3S4/Co(OH)2/ZIF-67. The as-prepared ODR-Co9S8/CoO/NC shows excellent bifunctional catalytic activities, featuring a low overpotential of 217 mV at 10 mA cm-2 in the oxygen evolution reaction (OER) and 160 mV at 10 mA cm-2 in the hydrogen evolution reaction (HER). This performance excellency is attributed to unique heterostructure and oxygen defects in Co9S8/CoO nanoparticles, the current work is expected to offer new insights to the design of cost-effective, noble-metal-free electrocatalysts.

Understanding the Evolution of Cobalt-Based Metal-Organic Frameworks in Electrocatalysis for the Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) have attracted increasing attention as a promising electrode material for the oxygen evolution reaction (OER). Comprehending catalytic mechanisms in the OER process is of key relevance for the design of efficient catalysts. In this study, two types of Co based MOF with different organic ligands (ZIF-67 and CoBDC; BDC=1,4-benzenedicarboxylate) are synthesized as OER electrocatalysts and their electrochemical behavior is studied in alkaline solution. Physical characterization indicates that ZIF-67, with tetrahedral Co sites, transforms into α-Co(OH)₂ on electrochemical activation, which provides continuous active sites in the following oxidation, whereas CoBDC, with octahedral sites, evolves into β-Co(OH)₂ through hydrolysis, which is inert for the OER. Electrochemical characterization reveals that Co sites coordinated by nitrogen from imidazole ligands (Co-N coordination) are more inclined to electrochemical activation than Co-O sites. The successive exposure and accumulation of real active sites is responsible for the gradual increase in activity of ZIF-67 in OER. This work not only indicates that CoMOFs are promising OER electrocatalysts but also provides a reference system to understand how metal coordination in MOFs affects the OER process.

Tuning Co2+ Coordination in Cobalt Layered Double Hydroxide Nanosheets via Fe3+ Doping for Efficient Oxygen Evolution

Inexpensive and efficient electrocatalysts are crucial for the development and practical application of energy conversion and storage technologies. Layered-double-hydroxide (LDH) materials have attracted much attention due to the special layered structure, but their electrocatalytic activity and stability are still limited. Herein, we propose to tune Co²⁺ occupancy and coordination in cobalt-based LDH nanosheets via Fe³⁺ doping for efficient and stable electrocatalysis for oxygen evolution reaction (OER). It is found that Fe doping regulates the occupancy and coordination of Co²⁺ in CoO₄ tetrahedrons and CoO₆ octahedrons of Co-LDHs. Through density functional theory calculation, we also clarified that Fe³⁺ not only modulated the Co²⁺ coordination but also functioned as an added catalytic active site. LDH nanosheets with a Co/Fe ratio of 5:1 show a low OER overpotential, much better than the commercial IrO₂, owing to the modulation of Fe³⁺ doping on the crystal and electronic structures. After appropriate incorporation of Fe³⁺, the almost inactive octahedral coordinated Co²⁺ is significantly activated with a partial deletion of tetrahedral coordinated Co²⁺, which greatly boosts the overall electrocatalytic activity. This study offers some new insights into tuning the crystal and electronic structures of LDHs by lattice doping to achieve high-efficiency electrocatalysis for OER.

The NHx Group Induced Formation of 3D α-Co(OH)2 Curly Nanosheet Aggregates as Efficient Oxygen Evolution Electrocatalysts

Recently, the curly structure attracts researchers' attention due to the strain effect, electronic effect, and improved surface area, which exhibits enhanced electrocatalytic activity. However, the synthesis of metastable curved structures is very difficult. Herein, a simple room temperature coprecipitation method is proposed to synthesize 3D cobalt (Co) hydroxide (α-Co(OH)₂ ) electrocatalysts that consist of curly 2D nanosheets. The formation process of curly nanosheets is elaborated systematically and the results demonstrate that the NH_x group has great effect on the formation of curly structure. Combining the advantage of 2D curly nanosheet and 3D aggregate structure, the as-prepared α-Co(OH)₂ curly nanosheet aggregates show the best water oxidation activity with an overpotential of 269 mV at j = 10 mA cm^-2 in 1.0 m KOH. The electrocatalytic process studies demonstrate that the formation of Co^IV O species is the rate-determining step. Theoretical calculations further confirm the beneficial effect of the bent structure on the conductivity, the adsorption of OH^- and the formation of OOH* species.

Facile Synthesis of 3d Transition-Metal-Doped α-Co(OH)2 Nanomaterials in Water-Methanol Mediated with Ammonia for Oxygen Evolution Reaction

Layered cobalt hydroxides are cost-efficient electrocatalysts for oxygen evolution reaction (OER) in the field of energy conversion. Herein, we developed a facile synthesis method of 3d transition-metal-doped α-Co(OH)₂ nanomaterials mediated with ammonia in water-methanol at room temperature. The doping of Cu²⁺ and Ni²⁺ leads to flower-like nanostructures similar to pure α-Co(OH)₂, whereas the doping of Fe²⁺ produces nanoparticles with more than 2 times larger surface area in comparison with the Cu²⁺- and Ni²⁺-doped nanoflowers. The obtained dispersion with the addition of Nafion can be used directly as an electrocatalyst for OER with excellent catalytic activity, especially that the overpotential of Fe²⁺ doped is as low as 290 mV at 10 mA cm^-2 and the turnover frequency is improved by 3 times as compared with that of α-Co(OH)₂. Furthermore, the catalyst can be loaded onto foam nickel, which presents excellent durability with the current density unchanged under continuous chronoamperometry reaction for as long as 12 h and almost quantitative faradaic efficiency. The superior electrocatalytic properties combined with the simple synthesis without the tedious purification procedure is very promising for OER.

Amorphous cobalt–iron hydroxides as high-efficiency oxygen-evolution catalysts based on a facile electrospinning process

The first example of amorphous CoFe hydroxide based on the electrospinning process was developed, which was used as an efficient OER catalyst.

Chlorine-doped α-Co(OH)2 hollow nano-dodecahedrons prepared by a ZIF-67 self-sacrificing template route and enhanced OER catalytic activity

A ZIF-67-self-sacrificing template strategy was designed for the synthesis of undoped/Cl-doped α-Co(OH)₂ hollow nano-dodecahedrons with enhanced OER performance.

An Ultrasonication-Assisted Cobalt Hydroxide Composite with Enhanced Electrocatalytic Activity toward Oxygen Evolution Reaction

A catalyst toward oxygen evolution reaction (OER) was synthesized by depositing cobalt hydroxide on carbon black. Ultrasonication was applied during precipitation to improve the performance of the catalyst. The ultrasonic-assisted process resulted in the refinement of the cobalt hydroxide particles from 400 nm to 50 nm, and the thorough incorporation of these particles with carbon black substrate. The resulting product exhibited enhanced OER catalytic activity with an onset potential of 1.54 V (vs. reversible hydrogen electrode), a Tafel slope of 18.18 mV/dec, and a stable OER potential at a current density of 10 mA cm⁻², because of the reduced resistance of the catalyst and the electron transfer resistance.