Three-dimensional NiCu layered double hydroxide nanosheets array on carbon cloth for enhanced oxygen evolution

NiCu-layered double hydroxide-modified CuO nanorods for enhanced non-enzymatic glucose sensing

A flexible non-enzymatic glucose sensor with high sensitivity (NiCu-LDH/CuO/NCC) was prepared by growing NiCu-layered double hydroxide (NiCu-LDH)-modified CuO nanorods on N-doped carbon cloth (NCC) using hydrothermal method and electrodeposition. The NCC provided abundant attachment sites and good electrical conductivity for CuO nanorods, and the hierarchical nanostructures (NiCu-LDH/CuO) had large specific surface area and highly catalytic active sites, which facilitated the electrooxidation of glucose. The effect of the ratio of Ni to Cu on the electrocatalytic performance of NiCu-LDH/CuO/NCC was evaluated. The results indicated that the optimized NiCu-LDH/CuO/NCC (Ni/Cu molar ratio of 2:1) had good electrocatalytic oxidation toward glucose, and exhibited high sensitivity (11.545 mA cm-2 mM-1), low detection limit (0.26 μM), large linear range (0.001-1.5 mM), and good stability (95% after 28 days). Therefore, the hierarchical nanostructure is suitable for the construction of flexible non-enzymatic glucose sensors with high sensitivity, indicating that the combination of transition metal oxides and LDH provides a unique opportunity for designing high-performance electrochemical non-enzymatic glucose sensors.

Graphitic Carbon Nitride-Supported Layered Double Hydroxides (GCN@FeMg-LDH) for Efficient Water Splitting and Energy Harvesting

The advancement of highly efficient and cost-effective electrocatalysts for electrochemical water splitting, along with the development of triboelectric nanogenerators (TENGs), is crucial for sustainable energy generation and harvesting. In this study, a novel hybrid composite by integrating graphitic carbon nitride (GCN) with an earth-abundant FeMg-layered double hydroxide (LDH) (GCN@FeMg-LDH) was synthesized by the hydrothermal approach. Under controlled conditions, with optimized concentrations of metal ions and GCN, the fabricated electrode, GCN@FeMg-LDH demonstrated remarkably low overpotentials of 0.018 and 0.284 V and 0.101 and 0.365 V at 10 and 600 mA/cm2 toward the hydrogen evolution (HER) and oxygen evolution (OER) reactions, respectively, in 1.0 M KOH. Furthermore, we leveraged the potential of the GCN@FeMg-LDH composite to develop a high-performance TENG suitable for practical electronic applications. The resulting GCN@FeMg-LDH-based TENG device, sized at 3 × 4 cm2, demonstrated a substantial current output of 52 μA and a voltage output of 771 V. Notably, this TENG device exhibited an instantaneous power output of 5780 μW and exceptional stability, enduring over 15 000 cycles. Thus, this study concludes that the GCN@FeMg-LDH composite emerges as a superior candidate for applications in water splitting and TENGs, exhibiting significant promise for advancing clean energy technologies, in addition to lowering greenhouse gas emissions.

FeOOH-CoFe layered double hydroxide carbon felt cathode for the electro-Fenton degradation of oxytetracycline in aqueous solution

Heterogeneous electro-Fenton is one of green and promising technologies for removing organic pollutants. In this paper, the FeOOH-CoFe layered double hydroxide carbon felt (LDH/CF) was synthesized by a facile hydrothermal method for an efficient degradation of oxytetracycline (OTC). The structural morphology and elemental composition of the composite electrode were studied by scanning electron microscopy, X-ray diffractometer, and X-ray photoelectron spectroscopy. Then, the electrocatalytic activity of the composite electrode was analysed through electrochemical characterization such as cyclic voltammetry, linear sweep voltammetry, and electrochemical impedance spectroscopy. The removal rate of 20 mg/L OTC reached about 91.6% at pH = 3, with a current density of 6.67 mA cm-2 within 60 minute in the hydrophobic FeOOH-CoFe LDH/CF + PTFE system. Moreover, the catalytic electrode exhibited impressive degradation efficiency over a wide pH range. According to quenching experiments, the principal reactive oxygen species (·O2-, ·OH, and 1O2) involved in the degradation of OTC was identified. Based on this discovery, the possible mechanism for the degradation of OTC was also proposed. In addition, the cyclic experiment demonstrated relatively excellent stability of the hydrophobic FeOOH-CoFe LDH/CF + PTFE electrode, which provided the possibility for the practical application of the electrode.

Lattice-disordered high-entropy metal hydroxide nanosheets as efficient precatalysts for bifunctional electro-oxidation

Electro-oxidation reactions (EORs) are important half reactions in overall and assisted water electrolysis, which are crucial in achieving economic and sustainable hydrogen production and realizing simultaneous wastewater treatment. Current studies indicate that the high-valence metal ions that are locally enriched in the catalysts or generated in situ during the anodic preoxidation process are active species for EORs. Hence, designing (pre)catalysts with enriched local active sites and boosted preoxidation is of great importance. In this work, with a focus on improving the EOR performance toward the oxygen evolution reaction (OER) and the urea oxidation reaction (UOR), we fabricated a lattice-disordered high-entropy FeCuCoNiZn hydroxide nanoarray catalyst that exhibits robust bifunctional OER and UOR behavior. The high-entropy feature could bring in a unique catalytic ensemble effect and remarkably improve the intrinsic OER/UOR activity. The lattice-disordered structure could not only enrich the local high-valence metal ions as active sites but also provide abundant reactive surface sites to accelerate the preoxidation process, thus leading to enriched active sites for the OER and UOR. Benefitting from the structural merits, the lattice-disordered high-entropy catalyst exhibits excellent OER and UOR activity with low overpotential, large current density and enhanced intrinsic activity, and no performance degradation but dramatic 35.3% and 88.7% enhancement in activity can be achieved during the long-term OER and UOR tests, respectively. The robust OER and UOR performance makes the lattice-disordered high-entropy catalyst a promising candidate for overall and urea-assisted water electrolysis from industrial, agricultural and sanitary wastewater.

Carbon cloth supporting spinel CuMn0.5Co2O4 nanoneedles with the regulated electronic structure by multiple metal elements as catalysts for efficient oxygen evolution reaction

Developing transition metal oxide catalysts to replace the noble metal oxide catalysts for efficient oxygen evolution reaction (OER) is essential to promote the practical application of water splitting. Herein, we designed and constructed the carbon cloth (CC) supporting spinel CuMn_0.5Co₂O₄ nanoneedles with regulated electronic structure by multiple metal elements with variable chemical valences in the spinel CuMn_0.5Co₂O₄. The carbon cloth not only provided good conductivity for the catalytic reaction but also supported the well-standing spinel CuMn_0.5Co₂O₄ nanoneedles arrays with a large special surface area. Meanwhile, the well-standing nanoneedles arrays and mesoporous structure of CuMn_0.5Co₂O₄ nanoneedles enhanced their wettability and facilitated access for electrolyte to electrochemical catalysis. Besides, the regulated electronic structure and generated oxygen vacancies of CuMn_0.5Co₂O₄/CC by multiple metal elements improved the intrinsic catalytic activity and the durability of OER activity. Profiting from these merits, the CuMn_0.5Co₂O₄/CC electrode exhibited superior OER activity with an ultralow overpotential of 189 mV at the current density of 10 mA⋅cm^-2 and a smaller Tafel slope of 64.1 mV⋅dec^-1, which was competitive with the noble metal oxides electrode. And the CuMn_0.5Co₂O₄/CC electrode also exhibited long-term durability for OER with 95.3% of current retention after 1000 cycles. Therefore, the competitive OER activity and excellent cycling durability suggested that the CuMn_0.5Co₂O₄/CC electrode is a potential candidate catalyst for efficient OER.

Flower-like Layered NiCu-LDH/MXene Nanocomposites as an Anodic Material for Electrocatalytic Oxidation of Methanol

Direct methanol fuel cell (DMFC) technology has grabbed much attention from researchers worldwide in the realm of green and renewable energy-generating technologies. Practical applications of DMFCs are marked by the development of highly active, efficient, economical, and long-lasting anode catalysts. Layered double hydroxide (LDH) nanohybrids are found to be efficient electrode materials for methanol oxidation. In this study, we synthesized NiCu-LDH/MXene nanocomposites (NCMs) and investigated their electrochemical performance for methanol oxidation. The formation of NCM was verified through field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET), and X-ray photoemission spectroscopy (XPS) analyses. The cyclic voltammetry, chronoamperometry, and electron impedance spectroscopy techniques were carried out to assess the electrocatalytic ability of the methanol oxidation reaction. The incorporation of MXene enhanced the methanol oxidation 2-fold times higher than NiCu-LDH. NCM-45 exhibited high peak current density (86.9 mA cm^-2), enhanced electrochemical active surface area (7.625 cm²), and long-term stability (77.8% retention after 500 cycles). The superior performance of NCM can be attributed to the synergistic effect between Ni and Cu and, further, the electronic coupling between LDH and MXene. Based on the results, NCM nanocomposite is an efficient anodic material for the electrocatalytic oxidation of methanol. This study will open the door for the development of various LDH/MXene nanocomposite electrode materials for the application of direct methanol fuel cells.

An inclusive review and perspective on Cu-based materials for electrochemical water splitting

In recent years, there has been a resurgence of interest in developing green and renewable alternate energy sources as a solution to the energy and environmental problems produced by conventional fossil fuel use. As a very effective energy transporter, hydrogen (H2) is a possible candidate for the future energy supply. Hydrogen production by water splitting is a promising new energy option. Strong, efficient, and abundant catalysts are required for increasing the efficiency of the water splitting process. Cu-based materials as an electrocatalyst have shown promising results for application in the Hydrogen Evolution Reaction (HER) and Oxygen Evolution Reaction (OER) in water splitting. In this review, our aim is to cover the latest developments in the synthesis, characterisation, and electrochemical behaviour of Cu-based materials as a HER, and OER electrocatalyst, highlighting the impact that these advances have had on the field. It is intended that this review article will serve as a roadmap for developing novel, cost-effective electrocatalysts for electrochemical water splitting based on nanostructured materials with particular emphasis on Cu-based materials for electrocatalytic water splitting.

High catalytic performance of nano-flowered Mg-doped NiCo layered double hydroxides for the oxygen evolution reaction

Layered double hydroxides (LDHs) are one of the ideal functional materials for the oxygen evolution reaction (OER) because of their special configuration and good electrochemical activity.

Selective Photocatalytic CO2 Reduction by Cobalt Dicyanamide

Photocatalytic conversion of CO2 into chemical fuels is a promising approach to tackle carbon emission and global warming. Herein, we promote a cobalt dicyanamide coordination compound, Co-dca, for the first...

Fast microwave-assisted preparation of nickel-copper-chromium-layered double hydroxide as an excellent electrocatalyst for water oxidation

Herein, we describe a simple microwave method for the doping of Cu2+ into NiCr-LDH and the preparation of ternary Ni2.25Cu0.75Cr-LDH as a superior electrocatalyst for water oxidation in a neutral solution. The obtained Ni2.25Cu0.75Cr-LDH was characterized by XRD, DRS, TEM and FE-SEM techniques. The results showed that Ni2.25Cu0.75Cr-LDH was formed with a size of 30 nm. In order to examine the water oxidation activity of Ni2.25Cu0.75Cr-LDH, the as-prepared samples were used as an electrocatalyst-modified carbon paste electrode in neutral solution. The electrochemical results revealed that the optimized Ni2.25Cu0.75Cr-LDH presented extraordinary water oxidation activity with a low onset potential of 1.40 V (vs. RHE) and an overpotential of 170 mV compared to other molar ratios (Ni2.5Cu0. 5Cr-LDH), (Ni2CuCr-LDH), and bimetallic (CuCr-LDH), and even outperformed NiCr-LDH. Also, a small Tafel slope of 31 mV and high durability of 14 h could be obtained for Ni2.25Cu0.75Cr-LDH. The excellent OER could be assigned to the decreased band gap energy and increased charge transfer at Ni2.25Cu0.75Cr-LDH. Therefore, Ni2.25Cu0.75Cr-LDH is a promising water oxidation catalyst owing to its improved charge transfer ability.

3D Flower-like NiCo Layered Double Hydroxides: An Efficient Electrocatalyst for Non-Enzymatic Electrochemical Biosensing of Hydrogen Peroxide in Live Cells and Glucose in Biofluids

Herein, a hierarchical structure of flower-like NiCo layered double hydroxides (NiCo LDH) microspheres composed of three-dimensional (3D) ultrathin nanosheets was successfully synthesized via a facile hydrothermal approach. The formation of NiCo LDH was confirmed by various physicochemical studies, and the NiCo LDH-modified glassy carbon electrode was used as an efficient dual-functional electrocatalyst for non-enzymatic glucose and hydrogen peroxide (H₂O₂) biosensor. The host matrix of hydrotalcite NiCo LDH exhibits the enhanced electrocatalytic sensing performances with a quick response time (<3 s), wide linear range (50 nM-18.95 mM and 20 nM-11.5 mM) and lowest detection limits (S/N = 3) (10.6 and 4.4 nM) toward glucose and H₂O₂, and also it exhibits good stability, selectivity, and reproducibility. In addition, this biosensor was successfully utilized to the real-time detection of endogenous H₂O₂ produced from live cells and glucose in various biological fluids, and demonstrates that the as synthesized NiCo LDH may provide a successful pathway for physiological and clinical pathological diagnosis.

Investigation on nanostructured Cu-based electrocatalysts for improvising water splitting: a review

In this review, various forms of Cu based nanostructures have been explored in terms of improvise and enhancing their activity and durability with vast investigation for OER, HER and TWS applications.

Surfactant-Free Approach for Engineering an Ultrathin Ti-Doped Ni(OH)2 Nanosheet on Carbon Cloth: Experimental and Theoretical Insight into Boosted Alkaline Water Oxidation Activity

Ti-based layered double hydroxides (LDHs) have enormous potential in photocatalysis, electrocatalysis, and photoelectrocatalysis. However, Ti-based LDHs are rarely reported because of the difficulties of the preparation process, in which the Ti precursors are more prone to hydrolysis into titanium hydroxide. In this work, toward robust, efficient, and earth-abundant electrocatalysts for water oxidation in alkaline environments, we have engineered Ti-doped Ni(OH)₂ nanosheet arrays on carbon cloth [Ti-Ni(OH)₂/CC] with a facile solvothermal and surfactant-free method. The experimental tests show that the activity of Ti-Ni(OH)₂-1/CC (∼12.5 atom % Ti substitution) is optimal among these materials. In addition, the activity is correlated with the Ti substitution ratio and reversed with higher Ti doping level (≥25 atom % Ti substitution). Therein, η₁₀ of Ti-Ni(OH)₂-1/CC is as low as 196 mV, and it is still maintained at 210 mV after a long-term chronopotentiometry (CP) test at a constant current density of 10 mA cm^-2 for 32 h, demonstrating superior activity and long-term durability. Density functional theory calculations further reveal that dilute Ti substitution produces extra active sites and promotes more optimal OH* adsorption to the surface of the electrocatalyst.

Electronic Modulation of Nickel Disulfide toward Efficient Water Electrolysis

Developing highly efficient earth-abundant nickel-based compounds is an important step to realize hydrogen generation from water. Herein, the electronic modulation of the semiconducting NiS₂ by cation doping for advanced water electrolysis is reported. Both theoretical calculations and temperature-dependent resistivity measurements indicate the semiconductor-to-conductor transition of NiS₂ after Cu incorporation. Further calculations also suggest the advantages of Cu dopant to cathodic water electrolysis by bringing Gibbs free energy of H adsorption at both Ni sites and S sites much closer to zero. It is noteworthy that water dissociation on Cu-doped NiS₂ (Cu-NiS₂ ) surface is even more favorable than those on NiS₂ and Pt(111). Thus, the prepared Cu-NiS₂ shows noticeably improved performance toward alkaline hydrogen and oxygen evolution reactions (HER and OER). Specifically, it requires merely 232 mV OER overpotential to drive 10 mA cm^-2 ; in parallel with Tafel slopes of 46 mV dec^-1 . Regarding HER, an onset overpotential of only 68 mV is achieved. When integrated as both electrodes for water electrolysis, Cu-NiS₂ needs only 1.64 V to drive 10 mA cm^-2 , surpassing the state-of-the-art Ir/C-Pt/C couple (1.71 V). This work opens up an avenue to engineer low-cost and earth-abundant catalysts performing on par with the noble-metal-based one for water splitting.

Accelerating charge transfer at an ultrafine NiFe-LDHs/CB interface during the electrocatalyst activation process for water oxidation

Benefiting from chemical bonding interface and homogeneity of active sites, NiFe-LDHs/CB possesses a faster nickel redox process, a tighter interface structure, and an increased number of active sites during activation process.

RETRACTED: Nanostructured Nickel Nitride with Reduced Graphene Oxide Composite Bifunctional Electrocatalysts for an Efficient Water-Urea Splitting

A three-dimensional nickel nitride with reduced graphene oxide composite on nickel foam (s-X, where s represents Ni3N/rGO@NF and the annealing temperature X can be 320, 350, or 380) electrode has been fabricated through a facile method. We demonstrate that s-350 has excellent urea oxidation reaction (UOR) activity, with a demanded potential of 1.342 V to reach 10 mA/cm2 and bears high hydrogen evolution reaction (HER) activity. It provides a low overpotential of 124 mV at 10 mA/cm2, which enables the successful construction of its two-electrode alkaline electrolyzer (s-350||s-350) for water-urea splitting. It merely requires a voltage of 1.518 V to obtain 100 mA/cm2 and is 0.145 V lower than that of pure water splitting. This noble metal-free bifunctional electrode is regarded as an inexpensive and effective water-urea electrolysis assisted hydrogen production technology, which is commercially viable.

Dispersing transition metal vacancies in layered double hydroxides by ionic reductive complexation extraction for efficient water oxidation

Creating atomic defects in nanomaterials is an effective approach to promote the catalytic performance of a catalyst, but the defective catalysts are often prone to mechanical collapse if not properly synthesized. The uncontrollably formed defects also make it difficult to systematically investigate their effects on the catalytic performance. Herein, we report an efficient method of ionic reductive complexation extraction (IRCE) to fabricate atomic vacancies in a transition metal based nanomaterial without damaging its nanostructure, turning the otherwise catalytically inactive material to an advanced catalyst towards water oxidation in alkaline electrolyte. Here nickel based layered double hydroxide mixed with Cu(ii) is used to demonstrate the concept. With a tunable content and uniform dispersion of Cu(ii) on the brucite layer of the LDH, a suitable complexing agent could specifically combine with and remove the target Cu(ii), thereby creating the desired vacancies. The resulting vacancy rich TM LDH is found to be an excellent OER electrocatalyst with a low overpotential and small Tafel slope, due to the purposely modulated geometric and electronic structures of the active sites, and the greatly decreased charge transfer resistance.