Tuning capacitance of graphene films via a robust routine of adjusting their hierarchical structures

Multi-Scale Structure-Mechanical Property Relations of Graphene-Based Layer Materials

Pristine graphene is one of the strongest materials known in the world, and may play important roles in structural and functional materials. In order to utilize the extraordinary mechanical properties in practical engineering structures, graphene should be assembled into macroscopic structures such as graphene-based papers, fibers, foams, etc. However, the mechanical properties of graphene-based materials such as Young’s modulus and strength are 1–2 orders lower than those of pristine monolayer graphene. Many efforts have been made to unveil the multi-scale structure–property relations of graphene-based materials with hierarchical structures spanning the nanoscale to macroscale, and significant achievements have been obtained to improve the mechanical performance of graphene-based materials through composition and structure optimization across multi-scale. This review aims at summarizing the currently theoretical, simulation, and experimental efforts devoted to the multi-scale structure–property relation of graphene-based layer materials including defective monolayer graphene, nacre-like and laminar nanostructures of multilayer graphene, graphene-based papers, fibers, aerogels, and graphene/polymer composites. The mechanisms of mechanical property degradation across the multi-scale are discussed, based on which some multi-scale optimization strategies are presented to further improve the mechanical properties of graphene-based layer materials. We expect that this review can provide useful insights into the continuous improvement of mechanical properties of graphene-based layer materials.

Large Capacity Enhancement of Carbon Electrodes by Solution Processing for High Density Energy Storage

An inexpensive, solution phase modification of flat carbon electrodes by electrochemical reactions of a 1,8-diaminonaphthalene derivative results in a 120- to 700-fold increase in capacity by formation of a 15-22 nm thick organic film. Modification of high surface area carbon electrodes with the same protocol resulted in a 12- to 82-fold increase in capacity. The modification layer contains 9-15% nitrogen present as -NH- redox centers that result in a large Faradaic component involving one H⁺ ion for each electron. The electrodes showed no capacity loss after prolonged cycling in 0.1 M H₂SO₄ and exhibited significantly higher charge density than similar reported electrodes based on graphene and polyaniline. Investigation of the deposition conditions revealed that N-doped oligomeric ribbons are formed both by diazonium ion reduction and diaminonaphthalene oxidation, and the 1,8 isomer is essential for the large capacity increases. The capacity increase has at least three contributions: increased microscopic surface area from ribbon formation, Faradaic reactions of nitrogen-containing redox centers, and changes in ribbon conductivity resulting from polaron formation. An aqueous fabrication process was developed which both increased capacity and improved stability and was amenable to industrial production. The high charge density, low-cost fabrication, and <25 nm thickness of the diaminonaphthalene-derived films should prove attractive toward practical application on both flat surfaces and in high surface area carbon electrodes.

Harvesting Low-Grade Heat via Thermal-Induced Electric Double Layer Redistribution of Nanoporous Graphene Films

In this work, a closed thermoelectric cell based on a nanoporous graphene electrode is developed to convert low-grade thermal energy to electric energy. The thermoelectric cell consists of two nanoporous graphene electrodes in contact with the hot and cold ends, respectively, encapsulated in a KCl electrolyte, and the energy is harvested from the redistribution of the electric double layer (EDL) of the graphene electrodes under different temperatures. Because of the large specific surface and conductivity of nanoporous graphene electrodes, the electric voltage is 168.91 mV with the hot-end temperature of 61 °C and cold-end temperature of 26 °C, corresponding to the thermoelectric coefficient of 4.54 mV·°C^-1, which is much larger than that of the conventional thermoelectric generator. The specific power output achieves 1.38 mW·g^-1 and is also significantly larger than the previous EDL-based thermoelectric generator. System performance with the concentration of the KCl electrolyte is examined. The proposed thermoelectric cell can harvest low-grade waste heat from the ambient environment, which may have potential applications in energy supply, wireless powered devices, outdoor survival, and so forth.