Co(OH)2@FeCo2O4 as electrode material for high performance faradaic supercapacitor application

Ultrafine FeCo2O4/Fe2O3 nanoparticles anchored on carbon nanotubes as high-performance anode materials for lithium-ion batteries

A novel FeCo2O4/Fe2O3@CNT anode material was engineered through a facile solvothermal assembly of ultrafine FeCo2O4/Fe2O3 nanoparticles onto a three-dimensional (3D) conductive carbon nanotube (CNT) network. Ultrafine FeCo2O4/Fe2O3 nanoparticles offer abundant electrolyte-accessible active sites for efficient Li+ ion transportation. Additionally, the unique 3D network constructed by CNTs helps accelerate electronic transmission and mitigate the volume expansion of metal oxide particles. As a result, superior electrochemical performance is achieved. Namely, at a current density of 500 mA g-1, the FeCo2O4/Fe2O3@CNT exhibited an initial discharge specific capacity of 1469.8 mA h g-1, maintaining 609.8 mA h g-1 following 100 cycles, offering valuable insights for the future development of anode materials for Li-ion batteries.

Multifunctional sulfur doping in cobalt-based materials for high-energy density supercapacitors

In this study, S-CCO@Co(OH)2('CCO' representing CuCo2O4/Cu2O; 'S-'representing sulfur doping) was synthesized by hydrothermal method followed by electrodeposition. The multiple effects of S doping were studied by S doping and constructing 3D core-shell structure. S doping induced the reduction of Cu2+and Co3+to Cu+and Co2+, respectively. Also, S partially replaces O and creates oxygen vacancies, which increases a number of active sites for the redox reaction enhancing the redox reaction activity. After the electrodeposition, S-Co bond is formed between the Co(OH)2shell and the S-CCO core, which suggests a synergistic effect between S doping and core-shell structure. The formation of S-Co bond is conducive to electron and ion transport, thus improving electrochemical performance. After modification, the specific capacitance of S-CCO@Co(OH)2is 4.28 times higher than CCO, up to 1730 Fg-1. Furthermore, the assembled S-CCO@Co(OH)2//activated carbon supercapacitor exhibits an energy density of 83.89 Whkg-1at 848.81 Wkg-1and a retention rate of 98.48% after 5000 charge and discharge cycles. Therefore, S doping and its mutual effect with the utilization of the core-shell structure considerably enhanced the electrochemical performance of the CCO-based electrodes, endowing its potential in further application.

In-situ fabrication of bimetallic FeCo2O4-FeCo2S4 heterostructure for high-efficient alkaline freshwater/seawater electrolysis

Rational construction of bifunctional electrocatalysts with long-term stability and high electrocatalytic activity is of great importance, but it is challenging to obtain highly efficient non-precious metal-based catalysts for overall seawater electrolysis. Herein, a nickel foam (NF) self-supporting CoFe-layered double hydroxide (CoFe-LDH/NF) was directly converted into FeCo2O4-FeCo2S4 heterostructure via hydrothermal method in 50 mM Na2S solution, instead of FeCo2O4@FeCo2S4 core-shell structure. The FeCo2O4-FeCo2S4 heterojunction shows nanosheets structure with rough surface (the thickness of ∼ 198.9 nm), which provides rich oxide/sulfide interfaces, high electrochemical active area, a large number of active sites, as well as fast charge and mass transfer. In 1.0 M KOH solution, 1.0 M KOH + 0.5 M NaCl, and alkaline natural seawater, the FeCo2O4-FeCo2S4 heterojunction exhibits eminently electrocatalytic performance, with overpotentials of η-100 = 225 mV, η-100 = 233 mV, and η-100 = 238 mV for OER, as well as η-100 = 271 mV, η-100 = 273 mV, and η-100 = 277 mV for HER, respectively. Furthermore, self-supporting FeCo2O4-FeCo2S4 electrode (FeCo2O4-FeCo2S4/NF) as the cathode and anode of an electrolyzer exhibits a lower cell voltage of E-100 = 1.75 V in alkaline seawater than those of FeCo2S4/NF (1.77 V), CoFe-LDH/NF (1.87 V), and FeCo2O4/NF (1.91 V). Specifically, FeCo2O4-FeCo2S4 electrolyzer can stably produce hydrogen for over 48 h in alkaline freshwater/seawater electrolyte. These outstanding electrocatalytic performances and corrosion resistance to salty-water can be attributed to the surface reconstruction behavior of the FeCo2O4-FeCo2S4/NF catalyst during OER, which leads to the in-situ formation of metal oxyhydroxides. In particular, the FeCo2O4-FeCo2S4 heterojunction is also very competitive among most state-of-the-art non-noble metal-based catalysts, whether in KOH or alkaline salty-water electrolytes.

A Facile Two-Step Hydrothermal Synthesis of Co(OH)2@NiCo2O4 Nanosheet Nanocomposites for Supercapacitor Electrodes

The composites of NiCo₂O₄ with unique structures were substantially investigated as promising electrodes. In this study, the unique structured nanosheets anchored on nickel foam (Ni foam) were prepared under the hydrothermal technique of NiCo₂O₄ and subsequent preparation of Co(OH)₂. The Co(OH)₂@NiCo₂O₄ nanosheet composite has demonstrated higher specific capacitances owing to its excellent specific surface region, enhanced rate properties, and outstanding electrical conductivities. Moreover, the electrochemical properties were analyzed in a three-electrode configuration to study the sample material. The as-designed Co(OH)₂@NiCo₂O₄ nanosheet achieves higher specific capacitances of 1308 F·g^-1 at 0.5 A·g^-1 and notable long cycles with 92.83% capacity retention over 6000 cycles. The Co(OH)₂@NiCo₂O₄ nanosheet electrode exhibits a long life span and high capacitances compared with the NiCo₂O₄ and Co(OH)₂ electrodes, respectively. These outstanding electrochemical properties are mainly because of their porous construction and the synergistic effects between NiCo₂O₄ and Co(OH)₂. Such unique Co(OH)₂@NiCo₂O₄ nanosheets not only display promising applications in renewable storage but also reiterate to scientists of the unlimited potential of high-performance materials.

In Situ Grown Mesoporous Structure of Fe-Dopant@NiCoOX@NF Nanoneedles as an Efficient Supercapacitor Electrode Material

In this study, we designed mixed metal oxides with doping compound nano-constructions as efficient electrode materials for supercapacitors (SCs). We successfully prepared the Fe-dopant with NiCoOx grown on nickel foam (Fe-dopant@NiCoOx@NF) through a simple hydrothermal route with annealing procedures. This method provides an easy route for the preparation of high activity SCs for energy storage. Obtained results revealed that the Fe dopant has successfully assisted NiCoOx lattices. The electrochemical properties were investigated in a three-electrode configuration. As a composite electrode for SC characteristics, the Fe-dopant@NiCoOx@NF exhibits notable electrochemical performances with very high specific capacitances of 1965 F g−1 at the current density of 0.5 A g−1, and even higher at 1296 F g−1 and 30 A g−1, respectively, which indicate eminent and greater potential for SCs. Moreover, the Fe-dopant@NiCoOx@NF nanoneedle composite obtains outstanding cycling performances of 95.9% retention over 4500 long cycles. The improved SC activities of Fe-dopant@NiCoOx@NF nanoneedles might be ascribed to the synergistic reactions of the ternary mixed metals, Fe-dopant, and the ordered nanosheets grown on NF. Thus, the Fe-dopant@NiCoOx@NF nanoneedle composite with unique properties could lead to promising SC performance.

Polypyrrole-Assisted Ag Doping Strategy to Boost Co(OH)2 Nanosheets on Ni Foam as a Novel Electrode for High-Performance Hybrid Supercapacitors

Battery-type electrode materials have attracted much attention as efficient and unique types of materials for hybrid battery supercapacitors due to their multiple redox states and excellent electrical conductivity. Designing composites with high chemical and electrochemical stabilities is beneficial for improving the energy storage capability of battery-type electrode materials. We report on an interfacial engineering strategy to improve the energy storage performance of a Co(OH)2-based battery-type material by constructing polypyrrole-assisted and Ag-doped (Ag-doped@Co(OH)2@polypyrrole) nanosheets (NSs) on a Ni foam using a hydrothermal process that provides richer electroactive sites, efficient charge transportation, and an excellent mechanical stability. Physical characterization results revealed that the subsequent decoration of Ag nanoparticles on Co(OH)2 nanoparticles offered an efficient electrical conductivity as well as a reduced interface adsorption energy of OH- in Co(OH)2 nanoparticles as compared to Co(OH)2@polypyrrole-assisted nanoparticles without Ag particles. The heterogeneous interface of the Ag-doped@Co(OH)2@polypyrrole composite exhibited a high specific capacity of 291.2 mAh g-1 at a current density of 2 A g-1, and showed a good cycling stability after 5000 cycles at 5 A g-1. The specific capacity of the doped electrode was enhanced approximately two-fold compared to that of the pure electrode. Thus, the fabricated Ag-doped@Co(OH)2@polypyrrole nanostructured electrodes can be a potential candidate for fabricating low-cost and high-performance energy storage supercapacitor devices.

Hierarchically nanostructured Zn0.76C0.24S@Co(OH)2 for high-performance hybrid supercapacitor

It is a great challenge to achieve both high specific capacity and high energy density of supercapacitors by designing and constructing hybrid electrode materials through a simple but effective process. In this paper, we proposed a hierarchically nanostructured hybrid material combining Zn_0.76Co_0.24S (ZCS) nanoparticles and Co(OH)₂ (CH) nanosheets using a two-step hydrothermal synthesis strategy. Synergistic effects between ZCS nanoparticles and CH nanosheets result in efficient ion transports during the charge-discharge process, thus achieving a good electrochemical performance of the supercapacitor. The synthesized ZCS@CH hybrid exhibits a high specific capacity of 1152.0 C g^-1 at a current density of 0.5 A g^-1 in 2 M KOH electrolyte. Its capacity retention rate is maintained at ∼ 70.0% when the current density is changed from 1 A g^-1 to 10 A g^-1. A hybrid supercapacitor (HSC) assembled from ZCS@CH as the cathode and active carbon (AC) as the anode displays a capacitance of 155.7 F g^-1 at 0.5 A g^-1, with a remarkable cycling stability of 91.3% after 12,000cycles. Meanwhile, this HSC shows a high energy density of 62.5 Wh kg^-1 at a power density of 425.0 W kg^-1, proving that the developed ZCS@CH is a promising electrode material for energy storage applications.

Iron decorated ultrathin cobaltous hydroxide nanoflakes with impressive electrochemical reactivity for aqueous Zn batteries

The main bottlenecks of current Co-based cathodes are their relatively low capacity and inferior reversibility. Here, we report Fe decorated cobaltous hydroxide (FCO) nanoflakes with vastly improved capacity and cycling stability via an efficient surface activation approach, which function as an advanced cathode for Co-Zn batteries. In comparison with the pristine cobaltous hydroxide (CO), the FCO sample owns higher electrochemical reactivity and a larger electrochemical surface area, endowing it with impressive electrochemical properties.

Noble-metal-free Fe3O4/Co3S4 nanosheets with oxygen vacancies as an efficient electrocatalyst for highly sensitive electrochemical detection of As(III)

The electrochemical method for highly sensitive determination of arsenic(III) in real water samples with noble-metal-free nanomaterials is still a difficult but significant task. Here, an electrochemical sensor driven by noble-metal-free layered porous Fe₃O₄/Co₃S₄ nanosheets was successfully employed for As(III) analysis, which was prepared via a facile two-step method involves a hydrothermal treatment and a subsequent sulfurization process. As expected, the electrochemical detection of As(III) in 0.1 M HAc-NaAc (pH 6.0) by square wave anodic stripping voltammetry (SWASV) with a considerable sensitivity of 4.359 μA/μg·L^-1 was obtained, which is better than the commonly used noble metals modified electrodes. Experimental and characterization results elucidate the enhancement of As(III) electrochemical performance could be attributed to its nano-porous structure, the presence of oxygen vacancies and strong synergetic coupling effects between Fe₃O₄ and Co₃S₄ species. Besides, the Fe₃O₄/Co₃S₄ modified screen printed carbon electrode (Fe₃O₄/Co₃S₄-SPCE) shows remarkable stability and repeatability, valuable anti-interference ability and could be used for detection in real water samples. Consequently, the results confirm that as-prepared porous Fe₃O₄/Co₃S₄ nanosheets is identified as a promising modifier to detect As(III) in real sample analysis.

Advances in Electrochemical and Catalytic Performance of Nanostructured FeCo2 O4 and Its Composites

It is well established that the excessive and uncontrolled use of fossil fuels and organic chemicals have put a risk to the earth's environment and the life that sustains within it. Carbon-free, sustainable, alternative energy technologies have therefore become the prime focus of current research. Smart inorganic materials have emerged as the potential solution to suffice energy needs and remediate the organic pollutants discharged to the environment. One such promising, versatile material is FeCo₂ O₄ which has gained immense research interest in the present decade due to its high efficiency and performance in energy and environmental applications. Innovative material design strategies involving the interplay of nanostructured morphology, chemical composition, redox surface states, and defect engineering have significantly enhanced both electrochemical and catalytic properties of FeCo₂ O₄ . Therefore, this review article aims to provide the first-ever comprehensive account of the latest research and developments in design-synthesis strategies, characterization techniques, and applications of nanostructured FeCo₂ O₄ and its composites in various electrochemical as well as catalytic applications. A detailed account of the nanostructured FeCo₂ O₄ and its composites in various energy storage and conversion devices such as supercapacitors (SCs), batteries, and fuel cells has been presented. Furthermore, a special section has been devoted to highlight the role of FeCo₂ O₄ in enhancing the sluggish reaction kinetics of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in water splitting application. This review also highlights the role of nanostructured FeCo₂ O₄ in photocatalytic waste water treatment, gas sensing, and dual-phase membrane technologies wherein FeCo₂ O₄ has demonstrated promising performance.

Three-dimensional hierarchical core-shell CuCo2O4@Co(OH)2 nanoflakes as high-performance electrode materials for flexible supercapacitors

Rational design of composite electrode materials with novel nanostructures plays an important role in improving both high energy density and structure stability of flexible and wearable supercapacitors. Herein, numerous peculiar three-dimensional hierarchical core-shell CuCo₂O₄@Co(OH)₂ nanoflakes directly grown on Ni foam are synthesized via a facile hydrothermal method and subsequent electrodeposition technique. Ultrathin Co(OH)₂ nanosheets arrays vertically anchored on CuCo₂O₄ nanoflakes can not only improve the electrical conductivity, but also provide interconnected channels for ion diffusion and enrich electrochemical active sites to boost faradaic redox reaction, leading to the enhanced electrochemical behavior. Excellent electrochemical performance of CuCo₂O₄@Co(OH)₂ electrode can be reflected on a higher specific capacitance of 1558 F/g and lower resistance compared with that of the pristine CuCo₂O₄ electrode. The asymmetric flexible supercapacitor assembled by the optimized CuCo₂O₄@Co(OH)₂ electrode and activated carbon exhibits high energy density of 62.5 Wh/kg at 893 W/kg, outstanding cycle stability of 88.6% capacitance retention after 10,000 cycles and remarkable mechanical flexibility, performing the best electrochemical behavior among various metal oxides based asymmetric supercapacitors. All above results indicate that the resulted hierarchical core-shell CuCo₂O₄@Co(OH)₂ electrode can be a promising candidate for flexible energy storage devices.

Enhanced supercapacitive performance of the CoFe2O4/CoFe2S4 composite nanoflake array induced by surface sulfidation

The CoFe₂O₄/CoFe₂S₄ composite nanoflake array was prepared by surface sulfidation and exhibited outstanding electrochemical performance.