Screen-printed GPH electrode modified with Ru nanoplates and PoPD polymer film for NADH sensing: Design and characterization

Decorated Electrode Surfaces with Nanostructures and Metal-Organic Frameworks as Transducers for Sensing

In this study, several materials are presented as modifiers of the screen-printed carbon electrodes with the aim of developing new sensing platforms for the voltammetric analysis of drugs. Specifically, Clotiapine and Sulfamethoxazole were selected as models for antipsychotics and antibiotics, respectively. Different nanostructures were studied as modifiers, including both transition metals and carbon-based materials. Moreover, biochar and two metal-organic frameworks (MOFs) were tested as well. The NH2-MIL-125(Ti) MOF showed an 80% improvement in the analytical signal of Sulfamethoxazole, but it partially overlapped with an additional signal associated with the loss of the MOF ligand. For this reason, several immobilization strategies were tested, but none of them met the requirements for the development of a sensor for this analyte. Conversely, carbon nanotubes and the NH2-MIL-101(Fe) MOF were successfully applied for the analysis of Clotiapine in the medicine Etumine®, with RSD below 2% and relative errors that did not exceed 9% in any case, which demonstrates the precision and accuracy achieved with the tested modifications. Despite these promising results, it was not possible to lower the limits of detection and quantification, so in this sense further investigation must be performed to increase the sensitivity of the developed sensors.

Electrochemical capacitance spectroscopy based determination of antibodies against SARS-CoV-2 virus spike protein

In this study, we are reporting a novel electrochemical capacitance spectroscopy (ECS) platform designed for the sensitive and label-free detection of antibodies against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus spike protein (anti-rS) in diluted blood serum. The determination of anti-rS is crucial for identification individuals who have been infected by SARS-CoV-2 virus and may have acquired immunity. The rS protein was immobilized on a screen-printed carbon electrode, which was incubated in diluted blood serum containing anti-rS antibodies. Label-free ECS was applied for the determination of interaction between immobilized rS and free-standing anti-rS. Here reported bioanalytical platform demonstrated high sensitivity and specificity in detecting anti-rS, achieving a limit of detection of 4.38 nM. This versatile platform could be further enhanced by applying various electrode materials and adapting this platform to detect antibodies against some other proteins. Our findings have significant implications for the development of affordable, scalable biosensing platforms capable to provide rapid and accurate public health screening and monitoring, particularly in the context of the coronavirus disease 2019 (COVID-19) pandemic.

Disposable electrocatalytic sensor for whole blood NADH monitoring

Monitoring nicotinamide adenine dinucleotide (NADH) is important because NADH is involved in cellular redox reactions and cellular energy production. Currently, few biosensors quantify NADH in whole blood. However, they still have limitations due to several defects, including poor repeatability, long analysis time, and their requirement of extra sample pretreatment. In this study, we developed electrocatalytic sensors using screen-printed electrodes with a redox-active monolayer 4′-mercapto-N-phenylquinone diamine formed by a self-assembled monolayer of a 4-aminothiophenol (4-ATP). We exhibited their behavior as electrocatalysts toward the oxidation of NADH in whole blood. Finally, the electrocatalytic sensors maintained stability and exhibited 3.5 µM limit of detection, with 0.0076 ± 0.0006 µM/µA sensitivity in a mouse’s whole blood. As proof of concept, a polyhexamethylene guanidine phosphate–treated mouse model was used to induce inflammatory and fibrotic responses, and NADH level was measured for 45 days. This work demonstrates the potential of electrocatalytic sensors to analyze NADH in whole blood and to be developed for extensive applications.

Review of the Design of Ruthenium-Based Nanomaterials and Their Sensing Applications in Electrochemistry

In this review, ruthenium nanoparticles (Ru NPs)-based functional nanomaterials have attractive electrocatalytic characteristics and they offer considerable potential in a number of fields. Ru-based binary or multimetallic NPs are widely utilized for electrode modification because of their unique electrocatalytic properties, enhanced surface-area-to-volume ratio, and synergistic effect between two metals provides as an effective improved electrode sensor. This perspective review suggests the current research and development of Ru-based nanomaterials as a platform for electrochemical (EC) sensing of harmful substances, biomolecules, insecticides, pharmaceuticals, and environmental pollutants. The advantages and limitations of mono-, bi-, and multimetallic Ru-based nanocomposites for EC sensors are discussed. Besides, the relevant EC properties and analyte sensing approaches are also presented. On the basis of these insights, we highlighted recent results for synthesizing techniques and EC environmental pollutant sensors from the perspectives of diverse supports, including graphene, carbon nanotubes, silica, semiconductors, metal sulfides, and polymers. Finally, this work overviews the modern improvements in the utilization of Ru-based nanocomposites on the basis for electroanalytical sensors as well as suggestions for the field's future development.

Enzyme decorated dendritic bimetallic nanocomposite biosensor for detection of HCHO

In recent times, bi- and tri-metallic nanocomposites are being extensively studied to improve the catalytic surface and sensitivity of detection. In this study, we designed a formaldehyde dehydrogenase decorated Cys-AuPd-ErGO nanocomposite with fern like AuPd dendrites deposited on reduced graphene oxide (ErGO) on screen printed electrode (SPE) for determination of NADH and successfully demonstrated its application for detection of HCHO. This biosensor exhibited direct electron transfer by lowering the oxidation potential of NADH from +0.63 V to 0.32 V vs Ag/AgCl, avoiding usage of electron mediators. The sensor LOD was 0.3 μM HCHO with excellent sensitivity of 70 μA/μM/cm² and linear detection range between 1 μM and 100 μM during chronoamperometric studies at applied over potential of +0.35 V vs Ag/AgCl. The sensor was tested for its performance in simulated HCHO adulterated samples of fish and milk, and appreciable recoveries (88-104%) at tested concentrations indicated good sensor performance. It was also validated against conventional method of HPLC with highly acceptable correlation coefficient of 0.99, indicating successful fabrication of a simple, "on site" disposable sensor for HCHO detection. The developed biosensor can also find wide application in quantitative measurement of NADH and analytes involved in reactions with the co-enzyme.

Recent Trends in the Improvement of the Electrochemical Response of Screen-Printed Electrodes by Their Modification with Shaped Metal Nanoparticles

Novel sensing technologies proposed must fulfill the demands of wastewater treatment plants, the food industry, and environmental control agencies: simple, fast, inexpensive, and reliable methodologies for onsite screening, monitoring, and analysis. These represent alternatives to conventional analytical methods (ICP-MS and LC-MS) that require expensive and non-portable instrumentation. This needs to be controlled by qualified technicians, resulting moreover in a long delay between sampling and high-cost analysis. Electrochemical analysis based on screen-printed electrodes (SPEs) represents an excellent miniaturized and portable alternative due to their disposable character, good reproducibility, and low-cost commercial availability. SPEs application is widely extended, which makes it important to design functionalization strategies to improve their analytical response. In this sense, different types of nanoparticles (NPs) have been used to enhance the electrochemical features of SPEs. NPs size (1–100 nm) provides them with unique optical, mechanical, electrical, and chemical properties that give the modified SPEs increased electrode surface area, increased mass-transport rate, and faster electron transfer. Recent progress in nanoscale material science has led to the creation of reproducible, customizable, and simple synthetic procedures to obtain a wide variety of shaped NPs. This mini-review attempts to present an overview of the enhancement of the electrochemical response of SPEs when NPs with different morphologies are used for their surface modification

Introducing polymer conductance in diagnostically relevant transduction

In this work we demonstrate that an impedance derived capacitance method is able to cleanly resolve the resonant conductance characteristics of an electrode-confined polymer film. In decorating the film with receptors, this conductance is thereafter modulated by the capturing of specific targets, demonstrated herein with C-reactive protein. This entirely reagentless and single step marker quantification is relevant to the drive of moving assays to a scaleable format requiring minimal user intervention.

•

Relaxation conductance was used to create a new transducer signal concept.

•

This relaxation conductance transducer signal concept was proved to be valid.

•

Conductive redox polymer was used as sensitive function for the new signal concept.

•

C-reactive protein was successfully detected in suitable low concentrations.

•

This transducer principle is equally applicable to any other target.

Porous PtAg nanoshells/reduced graphene oxide based biosensors for low-potential detection of NADH

A superior NADH sensing platform was constructed based on porous PtAg nanoshells supported on reduced graphene oxide (PtAg/rGO) in the absence of any enzymes and redox mediators. The PtAg/rGO composite was prepared via one-step reduction combined with galvanic replacement reaction. The as-made PtAg/rGO assembles multiple structural advantages of coherent conductive matrix, rich electroactive sites, and high specific surface area, accompanied by the unique alloying effect. The PtAg/rGO possesses adequate active reaction sites and fluent electron transport pathway towards the electrocatalytic NADH oxidation, thus presenting significantly increased oxidation current and negative shift of 330 mV in applied potential relative to the bare GCE. By virtues of the outstanding electrocatalytic activity, PtAg/rGO exhibits effective amperometric detection of NADH at 0.15 V within a wide linear concentration range of 2-2378 μM, a high sensitivity of 92.62 μA mM^-1 cm^-2, low detection limit of 0.2 μM, and long-term detection over 2500 s. Moreover, the as-constructed biosensors can achieve accurate NADH detection in human serum samples, indicating its promising application feasibility in fundamental and clinic research. Graphical Abstract Porous PtAg alloy nanoshells supported on reduced graphene oxide (PtAg/rGO) was prepared via a facile one-step reduction and spontaneous replacement reaction strategy. A sensitive and highly stable electrochemical biosensor based on PtAg/rGO is constructed for the quantitative detection of NADH at low applied potential.

Reagentless Redox Capacitive Assaying of C-Reactive Protein at a Polyaniline Interface

Methods that enable the sensitive and label-free detection of protein biomarkers are well-positioned to make potentially significant contributions to diagnostics and derived personalized healthcare. In support of this goal, a myriad of (electrochemical) methodologies have been developed; recently, electrochemical capacitance spectroscopy emerged as an impedance-derived approach which, in employing surface-confined redox-transducers, circumvents problems associated with the use of solution-phase redox-probes. Herein, we expand this scope by utilizing phytic acid-doped polyaniline as a novel redox-charging polymer support enabling the reagentless assaying of C-reactive protein in serum with good sensitivity. The construction of the sensory interface via electropolymerization allows facile tuning of the surface coverage and redox (capacitive) properties of the polymers, which, in turn, modulate both assay selectivity, fouling, and sensitivity. Significantly, this methodology is readily extendable to a wide range of electrode materials and analytes.