Reduced graphene oxide@nitrogen doped carbon with enhanced electrochemical performance in lithium ion batteries

van der Waals gap modulation of graphene oxide through mono-Boc ethylenediamine anchoring for superior Li-ion batteries

Li-ion batteries stand out among energy storage systems due to their higher energy and power density, cycle life, and high-rate performance. Development of advanced, high-capacity anodes is essential for enhancing their performance, safety, and durability, and recently, two-dimensional materials have garnered extensive attention in this regard due to distinct properties, particularly their ability to modulate van der Waals gap through intercalation. Covalently intercalated Graphene oxide interlayer galleries with mono-Boc-ethylenediamine (GO-EnBoc) was synthesized via the ring opening of epoxide, forming an amino alcohol moiety. This creates three coordination sites for Li ion exchange on the graphene oxide nanosheets' surface. Consequently, the interlayer d-spacing expands from 8.47 Å to 13.17 Å, as anticipated. When explored as an anode, Li-GO-EnBoc shows a significant enhancement in the stable and reversible capacity of 270 mA h g-1 at a current density of 25 mA g-1 compared to GO (80 mA h g-1), without compromising the mechanical or chemical stability. Through 13C, 7Li and 6Li MAS NMR, XPS, IR, Raman microscopy, and density functional theory (DFT) calculations, we confirm the positioning of Li+ ions at multiple sites of the interlayer gallery, which enhances the electrochemical performance. Our findings suggest that these novel systematically modulated van der Waals gap GO-engineered materials hold promise as efficient anodes for Li-ion batteries.

Upgrading anode graphite from retired lithium ion batteries via solid-phase exfoliation by mechanochemical strategy

Vast quantities of anode graphite from waste lithium ion batteries (LIBs), as a type of underrated urban mine, has enormous potential to be exploited for resource recovery. Herein, we propose a benign process integrating low-temperature pyrolysis and mechanochemical techniques to upcycle spent graphite (SG) from end-of-life LIBs. Pyrolysis at 500 °C leads to about 82.2 % PVDF dissociation in thermal treated graphite (TG). Solid-phase exfoliation via ball milling assisted by urea successfully produces abundant graphite flakes and a small amount of monolayer graphene nanosheet at the edge of mechanochemically processed graphite (MG). Subsequent rinsing removes the residual LiF salts. High purity and unique edge structural features of the as-prepared MG offer more active sites and storage reservoir for intercalation and de-intercalation of lithium ions, resulting in enhanced lithium-ion diffusion kinetics, excellent reversible specific capacity and desirable rate capability. Inspiringly, MG exhibits a remarkably enhanced initial specific charge capacity of 521.3 mAh g-1 during the first charge-discharge, and only declines from 569.9 mAh g-1 to 538 mAh g-1 with slight attenuation after 50 consecutive cycles at 0.1 A/g, indicating satisfactory cycle stability. Additionally, the purification and reconstruction mechanism for MG have been illustrated in detail. This study offers a green strategy to reconstruct and upgrade anode graphite from LIBs, which can realize sustainable waste management.

Graphene oxide–lithium-ion batteries: inauguration of an era in energy storage technology

A significant driving force behind the brisk research on rechargeable batteries, particularly lithium-ion batteries (LiBs) in high-performance applications, is the development of portable devices and electric vehicles. Carbon-based materials, which have finite specific capacity, make up the anodes of LiBs. Many attempts are being made to produce novel nanostructured composite anode materials for LiBs that display cycle stability that is superior to that of graphite using graphene oxide. Therefore, using significant amounts of waste graphene oxide from used LiBs represents a fantastic opportunity to engage in waste management and circular economy. This review outlines recent studies, developments and the current advancement of graphene oxide-based LiBs, including preparation of graphene oxide and utilization in LiBs, particularly from the perspective of energy storage technology, which has drawn more and more attention to creating high-performance electrode systems.

Nitrogen and boron doped carbon layer coated multiwall carbon nanotubes as high performance anode materials for lithium ion batteries

Lithium ion batteries (LIBs) are at present widely used as energy storage and conversion device in our daily life. However, due to the limited power density, the application of LIBs is still restricted in some areas such as commercial vehicles or heavy-duty trucks. An effective strategy to solve this problem is to increase energy density through the development of battery materials. At the same time, a stable long cycling battery is a great demand of environmental protection and industry. Herein we present our new materials, nitrogen and boron doped carbon layer coated multiwall carbon nanotubes (NBC@MWCNTs), which can be used as anodes for LIBs. The electrochemical results demonstrate that the designed NBC@MWCNTs electrode possesses high stable capacity over an ultra-long cycling lifespan (5000 cycles) and superior rate capability even at very high current density (67.5 A g⁻¹). Such impressive lithium storage properties could be ascribed to the synergistic coupling effect of the distinctive structural features, the reduced diffusion length of lithium ions, more active sites generated by doped atoms for lithium storage, as well as the enhancement of the electrode structural integrity. Taken together, these results indicate that the N, B-doped carbon@MWCNTs materials may have great potential for applications in next-generation high performance rechargeable batteries.

Coralloid carbon material based on biomass as a promising anode material for lithium and sodium storage

Coral-like porous carbon materials obtained by in situ template etching of biomass are used for lithium and sodium storage.

Graphene and Lithium-Based Battery Electrodes: A Review of Recent Literature

Graphene is a new generation material, which finds potential and practical applications in a vast range of research areas. It has unrivalled characteristics, chiefly in terms of electronic conductivity, mechanical robustness and large surface area, which allow the attainment of outstanding performances in the material science field. Some unneglectable issues, such as the high cost of production at high quality and corresponding scarce availability in large amounts necessary for mass scale distribution, slow down graphene widespread utilization; however, in the last decade both basic academic and applied industrial materials research have achieved remarkable breakthroughs thanks to the implementation of graphene and related 1D derivatives. In this work, after briefly recalling the main characteristics of graphene, we present an extensive overview of the most recent advances in the development of the Li-ion battery anodes granted by the use of neat and engineered graphene and related 1D materials. Being far from totally exhaustive, due to the immense scientific production in the field yearly, we chiefly focus here on the role of graphene in materials modification for performance enhancement in both half and full lithium-based cells and give some insights on related promising perspectives.

Nitrogen-Doped Graphene-Buffered Mn2 O3 Nanocomposite Anodes for Fast Charging and High Discharge Capacity Lithium-Ion Batteries

Mn₂ O₃ is a promising anode material for lithium-ion batteries (LIBs) because of its high theoretical capacity and low discharge potential. However, low electronic conductivity and capacity fading limits its practical application. In this work, Mn₂ O₃ with 1D nanowire geometry is synthesized in neutral aqueous solutions by a facile and effective hydrothermal strategy for the first time, and then Mn₂ O₃ nanoparticle and nitrogen-doped reduced graphene oxide (N-rGO) are composited with Mn₂ O₃ nanowires (Mn₂ O₃ -GNCs) to enhance its volume utilization and conductivity. When used as an anode material for LIBs, the Mn₂ O₃ -GNCs exhibit high reversible capacity (1350 mAh g^-1 ), stable cycling stability, and good rate capability. Surprisingly, the Mn₂ O₃ -GNC electrodes can also show fast charging capability; even after 200 cycles (charge: 10 A g^-1 ; discharge: 0.5 A g^-1 ), its discharge capacity can also keep at ≈500 mAh g^-1 . In addition, the Mn₂ O₃ -GNCs also have considerable full cell and supercapacitor performance. The excellent electrochemical performances can be ascribed to the N-rGO network structure and 1D nanowire structure, which can ensure fast ion and electron transportation.