Fabrication of MoS2 decorated reduced graphene oxide sheets from solid Mo-precursor for electrocatalytic hydrogen evolution reaction

"Nano knife" for efficient piezocatalytic inactivation of amoeba spores and their intracellular bacteria: Synergetic effect between physical damage and chemical oxidation

Microbial interactions between infectious agents severely interfere with the disinfection process, and current disinfection methods are unable to effectively inactivate intracellular pathogens, posing a new threat to drinking water safety. In this study, we first reported the high efficiency of piezocatalysis in inactivating amoebae and their intracellular bacteria. Results showed that the inactivation rates of the MoS2/rGO piezocatalytic system for amoebic spores and their intracellular bacteria were 4.18 and 5.02-log, respectively, within 180 min. Based on scavenger studies and ESR tests, the efficient inactivation of pathogens can be attributed to the generation of reactive oxygen species (ROS), and different pathogens exhibit varying tolerances to distinct ROS. Moreover, TEM analysis revealed that the sharp edge of MoS2/rGO was conducive to the physical cutting of amoeba's cell wall and membrane, promoting the attack of ROS and ensuring a more thorough deactivation. Additionally, the intracellular ROS produced by amoebae is not only conducive to the inactivation of amoebae but also the main reason for the inactivation of bacteria in spores. This study provides a new solution for the inactivation of amoeba spores and their intracellular bacteria and emphasizes the high efficiency of the synergistic effect of physical damage and chemical oxidation.

Growth of spiral ganglion neurons induced by graphene oxide/oxidized bacterial cellulose composite hydrogel

The damage or degeneration of spiral ganglion neurons (SGNs) can impair the auditory signals transduction from hair cells to the central auditory system, and cause significant hearing loss. Herein, a new form of bioactive hydrogel incorporating topological graphene oxide (GO) and TEMPO-oxidized bacterial cellulose (GO/TOBC hydrogel) was developed to provide a favorable microenvironment for SGN neurite outgrowth. As the network structure of lamellar interspersed fiber cross-linked by GO/TOBC hydrogels well simulated the structure and morphology of ECM, with the controllable hydrophilic property and appropriate Young's modulus well met those requirements of SGNs microenvironment, the GO/TOBC hybrid matrix exhibited great potential to promote the growth of SGNs. The quantitative real-time PCR result confirmed that the GO/TOBC hydrogel can significantly accelerate the development of growth cones and filopodia, by increasing the mRNA expression levels of diap3, fscn2, and integrin β1. These results suggest that GO/TOBC hydrogel scaffolds have the potential to be used to construct biomimetic nerve grafts for repairing or replacing nerve defects.

Surface Modification of Bacterial Cellulose for Biomedical Applications

Bacterial cellulose is a naturally occurring polysaccharide with numerous biomedical applications that range from drug delivery platforms to tissue engineering strategies. BC possesses remarkable biocompatibility, microstructure, and mechanical properties that resemble native human tissues, making it suitable for the replacement of damaged or injured tissues. In this review, we will discuss the structure and mechanical properties of the BC and summarize the techniques used to characterize these properties. We will also discuss the functionalization of BC to yield nanocomposites and the surface modification of BC by plasma and irradiation-based methods to fabricate materials with improved functionalities such as bactericidal capabilities.

Substrate Impact on the Structure and Electrocatalyst Properties of Molybdenum Disulfide for HER from Water

It is expected that utilization of molybdenum disulfide (MoS2)-based nanostructured electrocatalysts might replace the Pt-group electrodes most effectively applied for hydrogen evolution reaction from water. Therefore, in the past two decades, various approaches have been reported for fabrication of nanostructured MoS2-based catalysts, but their applications in practice are still missing due to lower activity and stability. We envisaged that the knowledge about the peculiarities of MoS2 nanoplatelets attachment to various conductive substrates by hydrothermal processing could be helpful for fabrication of more active and stable working electrodes. Therefore, in this study, the hydrothermal syntheses at the Mo, Ti, Al, anodized Ti, and hydrothermally designed titanium suboxide substrates were performed; the electrodes obtained were characterized; and hydrogen evolution reaction (HER) activity was tested. In this way, MoS2-based HER catalyst possessing a surprising stability and a low Tafel slope was designed via attachment of nanoplatelet-shaped MoS2 species to the nanotube-shaped anatase-TiO2 surface.

Benzophenone assisted UV-activated synthesis of unique Pd-nanodendrite embedded reduced graphene oxide nanocomposite: a catalyst for C–C coupling reaction and fuel cell

In this work we report the use of benzophenone (BP) for the synthesis of a palladium (Pd) embedded on reduced graphene oxide (rGO) nanocomposite (Pd/rGO) using a simple aqueous solution and UV irradiation. The simple and facile evolution of thermodynamically unstable branched Pd(0) nanodendrites was achieved by BP photoactivation, circumventing the growth of more stable nanomorphologies. The synthesis of Pd(0)-embedded rGO nanosheets (PRGO-nd) was made possible by the simultaneous reduction of both the GO scaffold and PdCl₂ by introducing BP into the photoactivation reaction. The nanocomposites obtained in the absence of BP were common triangular and twinned Pd(0) structures which were also implanted on the rGO scaffold (PRGO-nt). The disparity in morphologies presumably occurs due to the difference in the kinetics of the reduction of Pd²⁺ to Pd⁰ in the presence and absence of the BP photoinitiator. It was observed that the PRGO-nd was composed of dense arrays of multiple Pd branches around nucleation site which exhibited (111) facet, whereas PRGO-nt showed a mixture of (100) and (111) facets. On comparing the catalytic efficiencies of the as-synthesized nanocatalysts, we observed a superiority in efficiency of the thermodynamically unstable PRGO-nd nanocomposite. This is due to the evolved active facets of the dendritic Pd(0) morphology with its higher surface area, as testified by Brunauer–Emmett–Teller (BET) analysis. Since both PRGO-nd and PRGO-nt contain particles of similar size, the dents and grooves in the structure are the cause of the increase in the effective surface area in the case of nanodendrites. The unique dendritic morphology of the PRGO-nd nanostructures makes them a promising material for superior catalysis, due to their high surface area, and the high density of surface atoms at their edges, corners, and stepped regions. We investigated the efficiency of the as-prepared PRGO-nd catalyst in the Suzuki–Miyaura coupling reaction and showed its proficiency in a 2 h reaction at 60 °C using 2 mol% catalyst containing 0.06 mol% active Pd. Moreover, the electrochemical efficiency for the catalytic hydrogen evolution reaction (HER) was demonstrated, in which PRGO-nd provided a decreased overpotential of 68 mV for a current density of 10 mA cm⁻², a small Tafel slope of 57 mV dec⁻¹ and commendable stability during chronoamperometric testing for 5 h.

Benzophenone photoinitiator aided synthesis of Pd-nanodendrite embedded rGO nanocatalyst possessing superior potential in C–C coupling reaction and fuel cell application.