Self-supported bimetallic phosphide-carbon nanostructures derived from metal-organic frameworks as bifunctional catalysts for highly efficient water splitting

Oxygen Evolution Enhancement of Oxalate-Based Nickel-Iron MOF through Bipyridine Coordinated Strategy

The catalytic performance of oxalate-based Ni-Fe metal-organic frameworks (MOFs) in the oxygen evolution reaction (OER) was investigated via a coordination strategy. The bidentate chelating ligand 2,2'-bpy (2,2'-bipyridine), was utilized to improve the catalytic kinetics under ambient conditions. The results revealed that a MOF-to-MOF transformation including the formation of [M(2,2'-bpy)n]2/3+ (M = Ni/Fe, n = 1-3) could boost alkaline OER, giving an impressive ultralow overpotential of 220 mV at a current density of 10 mA/cm2 in a 1 M KOH solution, surpassing the performance of control group activity of oxalate-based Ni-Fe MOF. However, excessive addition of the ligand had a negative effect, leading to decreased activity. Further investigation revealed the double role of 2,2'-bpy: Both promote and suppress catalytic reactions. The catalytic mechanism was then discussed, highlighting the potential of secondary ligands to effectively fine-tune the catalytic behavior of these materials.

Electron and surface engineering of Ni2P/MnP4 heterojunction as high performance bifunctional electrocatalyst for amperage-level overall water splitting

Producing hydrogen through electrocatalytic overall water splitting with ampere-level current density is still limited by the high cost and poor stability of electrocatalysts. In this work, a new type Ni2P/MnP4 heterojunction composite material was designed and prepared as bifunctional electrocatalyst. Based on XPS spectra and theoretical calculation, the formation of Ni2P/MnP4 heterojunction successfully modulates the local electronic structure of Ni2P and enhances the ionization of H and Ni by increasing the electron transfer rate. Moreover, the special nanovilli structure and superhydropholic/superaerophobic surface of Ni2P/MnP4 heterojunction accelerates the transfer of electrolyte and gaseous products. Benefiting from these advantages, the as-prepared Ni2P/MnP4/CF not only exhibits superior electrocatalytic performance, which can release 10 mA/cm2 current density with a low overpotential of 69 mV and 247 mV for HER and OER respectively, but also shows admirable stability of continuous overall water splitting to drive 1000 mA/cm2 for 180 h without notable activity degradation. We believe this material possesses outstanding potential for industrial applications, and our strategy may provide a new pathway to design relative materials.

Electricity-driven dealkalization of bauxite residue based on thermodynamics, kinetics, and mineral transformation

High alkalinity content of bauxite residue is a major factor that hinders resource reutilization and pollutes the environment. Although acid neutralization is a direct and effective method, the amount of acid and secondary waste of sodium salt are still difficult problems to solve. Herein, we innovatively integrated an electric field into the acid neutralization dealkalization of bauxite residue and analyzed the dealkalization behavior by thermodynamics, kinetics, and mineral transformation. The results show that the pH of the anode chamber was maintained at the acidic levels of 3-6 after 30 min of galvanostatic electrolysis, and bauxite residue can realize dealkalization by acid neutralization. In the anode chamber, Na+ was released into the leachate via the reactions of Na3Al3Si3O12 and the removal of encapsulated soluble alkali. The stainless steel wire mesh anode exhibited its superiority and decreased the Na2O content in bauxite residue from 9.48 to 3.13% through convective mass transfer driven by the electric field and steady-state diffusion under stirring. This research provides a promising method for the electricity-driven dealkalization of bauxite residue, thus facilitating the development of multifield coupling theory and the application of electric fields in the alumina industry.

Recent Progress on Nickel- and Iron-Based Metallic Organic Frameworks for Oxygen Evolution Reaction: A Review

Developing sustainable energy solutions to safeguard the environment is a critical ongoing demand. Electrochemical water splitting (EWS) is a green approach to create effective and long-lasting electrocatalysts for the water oxidation process. Metal organic frameworks (MOFs) have become commonly utilized materials in recent years because of their distinguishing pore architectures, metal nodes easy accessibility, large specific surface areas, shape, and adaptable function. This review outlines the most significant developments in current work on developing improved MOFs for enhancing EWS. The benefits and drawbacks of MOFs are first discussed in this review. Then, some cutting-edge methods for successfully modifying MOFs are also highlighted. Recent progress on nickel (Ni) and iron (Fe) based MOFs have been critically discussed. Finally, a comprehensive analysis of the existing challenges and prospects for Ni- and Fe-based MOFs are summarized.

Self-Supporting Metal-Organic Framework-Based Nanoarrays for Electrocatalysis

The replacement of powdery catalysts with self-supporting alternatives for catalyzing various electrochemical reactions is extremely important for the large-scale commercial application of renewable energy storage and conversion technologies. Metal-organic framework (MOF)-based nanoarrays possess tunable compositions, well-defined structure, abundant active sites, effective mass and electron transport, etc., which enable them to exhibit superior electrocatalytic performance in multiple electrochemical reactions. This review presents the latest research progress in developing MOF-based nanoarrays for electrocatalysis. We first highlight the structural features and electrocatalytic advantages of MOF-based nanoarrays, followed by a detailed summary of the design and synthesis strategies of MOF-based nanoarrays, and then describe the recent progress of their application in various electrocatalytic reactions. Finally, the challenges and perspectives are discussed, where further exploration into MOF-based nanoarrays will facilitate the development of electrochemical energy conversion technologies.

Critical Review, Recent Updates on Zeolitic Imidazolate Framework-67 (ZIF-67) and Its Derivatives for Electrochemical Water Splitting

Design and construction of low-cost electrocatalysts with high catalytic activity and long-term stability is a challenging task in the field of catalysis. Metal-organic frameworks (MOF) are promising candidates as precursor materials in the development of highly efficient electrocatalysts for energy conversion and storage applications. This review starts with a summary of basic concepts and key evaluation parameters involved in the electrochemical water-splitting reaction. Then, different synthesis approaches reported for the cobalt-based Zeolitic imidazolate framework (ZIF-67) and its derivatives are critically reviewed. Additionally, several strategies employed to enhance the electrocatalytic activity and stability of ZIF-67-based electrocatalysts are discussed in detail. The present review provides a succinct insight into the ZIF-67 and its derivatives (oxides, hydroxides, sulfides, selenides, phosphide, nitrides, telluride, heteroatom/metal-doped carbon, noble metal-supported ZIF-67 derivatives) reported for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting applications. Finally, this review concludes with the associated challenges and the perspectives on developing the best economic, durable electrocatalytic materials.

CeO2 decorated bimetallic phosphide nanowire arrays for enhanced oxygen evolution reaction electrocatalysis via interface engineering

To realize electrocatalytic water splitting for hydrogen production, the development of efficient and durable anode materials containing earth-abundant elements is of great significance. In this work, we demonstrate a novel heterostructure with easily depositing CeO₂ nanoparticles on the surface of the metal-organic framework (MOF)-derived Co_0.4Ni_1.6P nanowire arrays. Such an interface engineering strategy triggers the formation of abundant oxygen vacancies and provides more electrocatalytically active sites. Besides, the synergistic effect in this composite can regulate the electronic structure, and lead to an enhanced charge-transfer ability. Benefiting from the above superiorities, this heterostructure exhibits remarkable electrocatalytic performance towards the oxygen evolution reaction (OER) in 1 M KOH electrolyte, requiring overpotentials (η) of 268 and 343 mV to yield current densities of 10 and 100 mA cm^-2, respectively, accompanied by a low Tafel slope of 79.3 mV dec^-1. Furthermore, the electrocatalytic performance of this heterostructure for the OER in simulated alkaline seawater (1 M KOH + 0.5 M NaCl) was also studied, and it achieved low η values of 345 and 394 mV to drive 100 and 200 mA cm^-2, respectively. This work presents a simple approach to fabricate heterostructural electrocatalysts with CeO₂ nanoparticles for high-performance water/seawater electrolysis.

MOF-on-MOF Strategy to Construct a Nitrogen-Doped Carbon-Incorporated CoP@Fe-CoP Core-Shelled Heterostructure for High-Performance Overall Water Splitting

The design and preparation of efficient and low-cost catalysts for water electrolysis are crucial and highly desirable to produce eco-friendly and sustainable hydrogen fuel. Herein, we prepared nitrogen-doped carbon-incorporated CoP@Fe-CoP core-shelled nanorod arrays grown on Ni foam (CoP@Fe-CoP/NC/NF) through phosphorization of ZIF-67@Co-Fe Prussian blue analogue (ZIF-67@CoFe-PBA). The hierarchical nanorod arrays combined with the core-shelled structure offer favorable mass/electron transport capacity and maximize the active sites, thus enhancing the electrochemically active surface area. The synergistic effect of the bimetallic components and the nitrogen-doped carbon matrix endow the composite with an optimized electronic structure. Benefiting from the above superiorities of morphological and chemical compositions, this self-supported CoP@Fe-CoP/NC/NF heterostructure can drive alkaline hydrogen evolution reaction and oxygen evolution reaction with overpotentials of 97 and 270 mV to yield 100 mA cm^-2, respectively. The two-electrode alkaline electrolyzer constructed by this heterostructure shows a low cell voltage of 1.58 V to yield 10 mA cm^-2, superior to the precious-metal-based electrocatalyst apparatus (IrO₂∥Pt/C). This study offers a feasible and facile approach to develop efficient electrocatalysts for water electrolysis, which applies to other electrochemical energy conversion and storage applications.

Metal-Organic Frameworks-Derived Self-Supported Carbon-Based Composites for Electrocatalytic Water Splitting

Electrocatalytic water splitting has been considered as a promising strategy for the sustainable evolution of hydrogen energy and storage of intermittent electric energy. Efficient catalysts for electrocatalytic water splitting are urgently demanded to decrease the overpotentials and promote the sluggish reaction kinetics. Carbon-based composites, including heteroatom-doped carbon materials, metals/alloys@carbon composites, metal compounds@carbon composites, and atomically dispersed metal sites@carbon composites have been widely used as the catalysts due to their fascinating properties. However, these electrocatalysts are almost powdery form, and should be cast on the current collector by using the polymeric binder, which would result in the unsatisfied electrocatalytic performance. In comparison, a self-supported electrode architecture is highly attractive. Recently, self-supported metal-organic frameworks (MOFs) constructed by coordination of metal centers and organic ligands have been considered as suitable templates/precursors to construct free-standing carbon-based composites grown on conductive substrate. MOFs-derived carbon-based composites have various merits, such as the well-aligned array architecture and evenly distributed active sites, and easy functionalization with other species, which make them suitable alternatives to non-noble metal-included electrocatalysts. In this review, we intend to show the research progresses by employment of MOFs as precursors to prepare self-supported carbon-based composites. Focusing on these MOFs-derived carbon-based nanomaterials, the latest advances in their controllable synthesis, composition regulation, electrocatalytic performances in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting (OWS) are presented. Finally, the challenges and perspectives are showed for the further developments of MOFs-derived self-supported carbon-based nanomaterials in electrocatalytic reactions.

Fabrication of Magnetic Superstructure NiFe2O4@MOF-74 and Its Derivative for Electrocatalytic Hydrogen Evolution with AC Magnetic Field

As an ideal hydrogen production route, electrolyzed water still faces the challenges of high cost of noble-metal electrocatalysts and low performance of non-noble-metal catalysts in scalable applications. Recently, introduction of external fields (such as magnetic fields, light fields, etc.) to improve the electrocatalytic water splitting performance of non-noble-metal catalysts has attracted great attention due to their simplicity. Here, a simple method for preparing magnetic superstructure (NiFe₂O₄@MOF-74) is described, and the hydrogen evolution reaction (HER) behavior of its carbonized derivative, a ferromagnetic superstructure, is revealed in a wide range of applied voltage under an AC magnetic field. The overpotential (@10 mA cm^-2) required for the HER of the obtained ferromagnetic superstructure in 1 M KOH was reduced by 31 mV (7.7%) when a much small AC magnetic field (only 2.3 mT) is applied. Surprisingly, the promotion effect of the AC magnetic field is not monotonically increasing with the increase of the applied voltage or the strength of AC magnetic field, but increasing first, then weakening. This unusual behavior is believed to be mainly caused by the enhanced induced electromotive force and the additional energy by the applied AC magnetic field. This discovery provides a new idea for adjusting the performance of electrocatalytic reactions.

Recent development of two-dimensional metal-organic framework derived electrocatalysts for hydrogen and oxygen electrocatalysis

Developing efficient and low-cost electrocatalysts with unique nanostructures is of great significance for improved electrocatalytic reactions, including the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). Two-dimensional (2D) metal-organic frameworks (MOFs) have attracted recent attention because of their unique dimension-related properties, such as ultrathin thickness, large specific surface area, and abundant accessible active sites that can act as good precursors for the derivation of a variety of nanocomposites as active materials in electrocatalysis and energy-related devices. In this review, we present recent developments in 2D MOF-derived nanomaterials for hydrogen and oxygen reactions in overall water-splitting and rechargeable Zn-air batteries. The advantages of various synthetic strategies are summarized and discussed in detail. Finally, we discuss the main challenges and future perspectives of the development of 2D MOF-derived electrocatalysts.

Enhanced Oxygen Evolution Reaction Activity of a Co2P@NC-Fe2P Composite Boosted by Interfaces Between a N-Doped Carbon Matrix and Fe2P Microspheres

Constructing highly efficient and low-cost transition-metal-based electrocatalysts with a large number of interfaces to increase their active site densities constitutes a major advancement in the development of water-splitting technology. Herein, a bimetallic phosphide composite (Co₂P@NC-Fe₂P) is successfully synthesized from a ferric hydroxyphosphate-zeolitic imidazolate framework hybrid precursor (FeHP-ZIF-67). Benefitting from morphology and composition regulations, the FeHP-ZIF-67 precursor is prepared by a room-temperature solution synthesis method, which exhibits an optimal morphology, where FeHP microspheres are coated with excess ZIF-67 nanoparticles. During the annealing of FeHP-ZIF-67, FeHP serves as a source of phosphorus to form Fe₂P and Co₂P simultaneously, where Co₂P nanoparticles coated with an N-doped carbon (NC) matrix derived from ZIF-67 are partially adsorbed onto the surface of Fe₂P microspheres, thereby forming numerous NC-Fe₂P interfaces. The optimal Co₂P@NC-Fe₂P composite has an overpotential of 260 mV at a current density of 10 mA cm^-2, a small Tafel slope of 41 mV dec^-1, and long-term stability of over 35 h in an alkaline medium for oxygen evolution reactions (OERs). Such a superior OER performance is attributed to the active NC-Fe₂P interfaces in the Co₂P@NC-Fe₂P composite. This work provides a new strategy to optimize transition-metal phosphides with effective interfaces for OER electrocatalysis.

A rationally designed bifunctional oxygen electrocatalyst based on Co2P nanoparticles for Zn–air batteries

A highly-efficient Co₂P-based bifunctional oxygen catalyst has been developed though an enhanced coupling with N,P co-doped carbon nanoparticles and 3D carbon networks, which exhibits better bi-catalytic performance than benchmark noble metal-based counterparts.

KB-templated in situ synthesis of highly dispersed bimetallic NiFe phosphides as efficient oxygen evolution catalysts

KB-templated in situ synthesized highly dispersed bimetallic NiFe phosphides function as efficient oxygen evolution catalysts.