Synthesis of 3D hierarchically porous carbon@Bi-BiOCl nanocomposites via in situ generated NaCl crystals as templates for highly sensitive detection of Pb2+ and Cd2+

Recent advance of nanomaterials modified electrochemical sensors in the detection of heavy metal ions in food and water

As one of the main pollutants, heavy metal ions can accumulate in the human body and cause a cascade of damage. Electrochemical sensors provide great prospects for tracing heavy metal ions because of their properties of high sensitivity, low detection limits and fast response. Electrode surface modification materials play a key role in enhancing the performance of electrochemical sensors. Herein, we summarize in detail the recent work on electrochemical sensors modified by carbon nanomaterials (graphene and its derivatives, carbon nanofibers and carbon nanotubes), metal nanomaterials (gold, silver, bismuth and iron), complexes (MOFs, ZIFs and MXenes) and their composites for the detection of heavy metal ions (mainly include Cd(II), Hg(II), Pb(II), As(III), Cu(II) and Zn(II)) in food and water. The synthetic strategies, mechanisms, innovations, advantages, challenges and prospects of various electrode modification nanomaterials for the detection of heavy metal ions in food and water are discussed.

Electrochemical sensor based on Bi/Bi2O3 doped porous carbon composite derived from Bi-MOFs for Pb2+ sensitive detection

It is of great significance to develop electrochemical sensors based on novel functional nanomaterials for heavy metal ions detection. In this work, a novel Bi/Bi₂O₃ co-doped porous carbon composite (Bi/Bi₂O₃@C) was prepared by simple carbonization of bismuth-based metal-organic frameworks (Bi-MOFs). The micromorphology, internal structure, crystal and elemental composition, specific surface area and porous structure of the composite were characterized by SEM, TEM, XRD, XPS, and BET. Further, a sensitive electrochemical sensor for Pb²⁺ detection was constructed by modifying Bi/Bi₂O₃@C on the surface of the glassy carbon electrode (GCE) based on the square wave anodic stripping voltammetric (SWASV). The different factors affecting the analytical performance were optimized systematically, such as material modification concentration, deposition time, deposition potential, and pH value. Under optimized conditions, the proposed sensor exhibited a wide linear range from 37.5 nM to 2.0 μM with a low detection limit of 6.3 nM. Meanwhile, the proposed sensor showed good stability, acceptable reproducibility, and satisfactory selectivity. The reliability of the as-proposed sensor was confirmed by the ICP-MS method for Pb²⁺ detection in different samples.

Bismuth Nanoclusters/Porous Carbon Composite: A Facile Ratiometric Electrochemical Sensing Platform for Pb2+ Detection with High Sensitivity and Selectivity

In this work, a ratiometric electrochemical sensor was constructed for the detection of Pb²⁺ based on a bismuth nanocluster-anchored porous activated biochar (BiNCs@AB) composite. BiNCs with loose structure and AB with abundant oxygen-containing functional groups are favorable for Pb²⁺ adsorption and preconcentration; meanwhile, porous AB provides more mass transfer pathways and increases electronic and ion diffusion coefficients, realizing high sensitivity for Pb²⁺ detection. At the same time, BiNCs were proposed as an inner reference for ratiometric electrochemical detection, which could greatly enhance the determination accuracy. Under optimized experimental conditions, the anodic peak current ratio between Pb²⁺ and BiNCs exhibited a good linear relationship with the concentration from 3.0 ng/L to 1.0 mg/L. The detection limit can be detected down to 1.0 ng/L. Furthermore, the proposed sensor demonstrated good reproducibility, stability, and interference resistance, as well as satisfactory recoveries for the detection of Pb²⁺ in real samples.

Two-dimensional BCN nanosheets self-assembled with hematite nanocrystals for sensitively detecting trace toxic Pb(II) ions in natural water

In the present work, hematite-boron-carbonitride (Fe₂O₃-BCN) nanosheets were synthesized by a simple hydrothermal reaction and the following high temperature treatment. The morphology, structure and chemical composition of the as-prepared material were carefully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The Fe₂O₃-BCN nanosheets were used to modified on the surface of the glassy carbon electrode to fabricate an electrochemical sensor for lead ions (Pb(II)) via differential pulse anodic stripping voltammetry (DPASV). At the same time, the influence of the modification concentration, solution acidity, deposition potential and deposition time on response peak current of Pb(II) at the Fe₂O₃-BCN-based electrochemical sensor was well investigated. Under the optimized conditions, the electrochemical signal and concentration of Pb(II) show two-stage linear relationship in the range of 0.5 - 40 μg/L and 40 -140 μg/L, with a limit of detection (LOD) of 0.129 μg/L. The Fe₂O₃-BCN-based electrochemical sensor shows excellent selectivity and anti-interference ability in the anti-interference experiments and actual sample analysis experiments, revealing its broad application in environmental monitoring of Pb(II).

Acid-etched Fe/Fe2O3 nanoparticles encapsulated into carbon cloth as a novel voltammetric sensor for the simultaneous detection of Cd2+ and Pb2

A portable electrode with usability, availability, and high-sensitivity is of great significance for effective on-site detection in practical situations. In this paper, a novel flexible, disposable sensor for Cd²⁺ and Pb²⁺ with ultrahigh sensitivity and a fast response, based on acid-etched Fe/Fe₂O₃ encapsulated into a disposable carbon cloth electrode, has been successfully fabricated. Differential pulse anode stripping voltammetry (DPASV) was used to investigate the stripping behavior of Cd²⁺ and Pb²⁺, achieving high sensitivity for Cd²⁺ and Pb²⁺ (338.7 and 408.0 μA mM^-1 cm^-2) with limits of detection (LODs) of 0.42 ppb and 0.50 ppb, respectively. Meanwhile, remarkable stability and reproducibility were obtained. Such an electrode can detect Cd²⁺ and Pb²⁺ in actual water samples so this is a good candidate to act as a simple and convenient sensor for general applications. More importantly, the novel disposable electrode exhibited the unique advantages of convenience, portability, and reliability compared to a conventional electrode, which may make it an alternative advantageous choice for practical on-site detection.

Recent Advances of Porous Graphene: Synthesis, Functionalization, and Electrochemical Applications

Graphene is a 2D sheet of sp² bonded carbon atoms and tends to aggregate together, due to the strong π-π stacking and van der Waals attraction between different layers. Its unique properties such as a high specific surface area and a fast mass transport rate are severely blocked. To address these issues, various kinds of 2D holey graphene and 3D porous graphene are either self-assembled from graphene layers or fabricated using graphene related materials such as graphene oxide and reduced graphene oxide. Porous graphene not only possesses unique pore structures, but also introduces abundant exposed edges and accelerates mass transfer. The properties and applications of these porous graphenes and their composites/hybrids have been extensively studied in recent years. Herein, recent progress and achievements in synthesis and functionalization of various 2D holey graphene and 3D porous graphene are reviewed. Of special interest, electrochemical applications of porous graphene and its hybrids in the fields of electrochemical sensing, electrocatalysis, and electrochemical energy storage, are highlighted. As the closing remarks, the challenges and opportunities for the future research of porous graphene and its composites are discussed and outlined.