Carbon-free sulfur-based composite cathode for advanced Lithium-Sulfur batteries: A case study of hierarchical structured CoMn2O4 hollow microspheres as sulfur immobilizer

Selective Nitridation Crafted a High-Density, Carbon-Free Heterostructure Host with Built-In Electric Field for Enhanced Energy Density Li-S Batteries

To achieve both high gravimetric and volumetric energy densities of lithium-sulfur (Li-S) batteries, it is essential yet challenging to develop low-porosity dense electrodes along with diminishment of the electrolyte and other lightweight inactive components. Herein, a compact TiO₂ @VN heterostructure with high true density (5.01 g cm^-3 ) is proposed crafted by ingenious selective nitridation, serving as carbon-free dual-capable hosts for both sulfur and lithium. As a heavy S host, the interface-engineered heterostructure integrates adsorptive TiO₂ with high conductive VN and concurrently yields a built-in electric field for charge-redistribution at the TiO₂ /VN interfaces with enlarged active locations for trapping-migration-conversion of polysulfides. Thus-fabricated TiO₂ @VN-S composite harnessing high tap-density favors constructing dense cathodes (≈1.7 g cm^-3 ) with low porosity (<30 vol%), exhibiting dual-boosted cathode-level peak volumetric-/gravimetric-energy-densities nearly 1700 Wh L^-1 _cathode /1000 Wh kg^-1 _cathode at sulfur loading of 4.2 mg cm^-2 and prominent areal capacity (6.7 mAh cm^-2 ) at 7.6 mg cm^-2 with reduced electrolyte (<10 µL mg^-1 _sulfur ). Particular lithiophilicity of the TiO₂ @VN is demonstrated as Li host to uniformly tune Li nucleation with restrained dendrite growth, consequently bestowing the assembled full-cell with high electrode-level volumetric/gravimetric-energy-density beyond 950 Wh L^-1 _{cathode+anode} /560 Wh kg^-1 _{cathode+anode} at 3.6 mg cm^-2 sulfur loading alongside limited lithium excess (≈50%).

Organic Dye-Derived N, S Co-Doped Porous Carbon Hosts for Effective Lithium Polysulfide Confinement in Lithium-Sulfur Batteries

Lithium–sulfur batteries are considered as attractive candidates for next-generation energy storage systems originating from their high theoretical capacity and energy density. However, the severe shuttling of behavior caused by the dissolution of lithium polysulfide intermediates during cycling remains a challenge for practical applications. Herein, porous carbon materials co-doped with nitrogen and sulfur atoms were prepared through a facile hydrothermal reaction of graphene oxide and methylene blue to obtain a suitable host structure for regulating the lithium polysulfide shuttling behavior. Experimental results demonstrated that the abundant heteroatom-containing moieties in the carbon frameworks not only generated favorable active sites for capturing lithium polysulfide but also enhanced redox reaction kinetics of lithium polysulfide intermediates. Consequently, the corresponding sulfur composite electrodes exhibited excellent rate performance and cycling stability along with high Columbic efficiency. This work highlights the approach for the preparation of nitrogen and sulfur co-doped carbon materials derived from organic dye compounds for high performance energy storage systems.

Strategy of Enhancing the Volumetric Energy Density for Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries hold the promise of the next generation energy storage system beyond state-of-the-art lithium-ion batteries. Despite the attractive gravimetric energy density (W_G ), the volumetric energy density (W_V ) still remains a great challenge for the practical application, based on the primary requirement of Small and Light for Li-S batteries. This review highlights the importance of cathode density, sulfur content, electroactivity in achieving high energy densities. In the first part, key factors are analyzed in a model on negative/positive ratio, cathode design, and electrolyte/sulfur ratio, orientated toward energy densities of 700 Wh L^-1 /500 Wh kg^-1 . Subsequently, recent progresses on enhancing W_V for coin/pouch cells are reviewed primarily on cathode. Especially, the "Three High One Low" (THOL) (high sulfur fraction, high sulfur loading, high density host, and low electrolyte quantity) is proposed as a feasible strategy for achieving high W_V , taking high W_G into consideration simultaneously. Meanwhile, host materials with desired catalytic activity should be paid more attention for fabricating high performance cathode. In the last part, key engineering technologies on manipulating the cathode porosity/density are discussed, including calendering and dry electrode coating. Finally, a future outlook is provided for enhancing both W_V and W_G of the Li-S batteries.

Incorporation ZnS quantum dots into carbon nanotubes for high-performance lithium-sulfur batteries

Constructing sulfur hosts with high electronic conductivity, large void space, strong chemisorption, and rapid redox kinetics is critically important for their practical applications in lithium-sulfur batteries (LSBs). Herein, by coupling ZnS quantum dots (QDs) with carbon nanotubes (CNTs), one multifunctional sulfur host CNT/ZnS-QDs is designed via a facile one-step hydrothermal method. SEM and TEM analyses reveal that small ZnS-QDs (<5 nm) are uniformly anchored on the CNT surface as well as encapsulated into CNT channels. This special architecture ensures sulfur direct contacting with highly conductive CNTs; meanwhile, the catalytic effect of anchored ZnS-QDs improves the chemisorption and confinement to polysulfides. Benefiting from these merits, when used as sulfur hosts, this special architecture manifests a high specific capacity, superior rate capability, and long-term cycling stability. The ZnS-QDs dependent electrochemical performance is also evaluated by adjusting the mass ratio of ZnS-QDs, and the host of CNT/ZnS-QDs 27% owns the optimal cell performance. The specific capacity decreases from 1051 mAh g^-1 at 0.2 C to 544 mAh g^-1 at 2.0 C, showing rate capability much higher than CNT/S and other CNT/ZnS-QDs/S samples. After 150 cycles, the cyclic capacity at 0.5 C exhibits a slow reduction from 1051 mAh g^-1 to 771 mAh g^-1, showing a high retention of 73.4% with a coulombic efficiency of over 99%. The electrochemical impedance spectroscopy analyses demonstrate that this special architecture juggles high conductivity and excellent confinement of polysulfides, which can significantly suppress the notorious shuttle effect and accelerate the redox kinetics. The strategy in this study provides a feasible approach to design efficient sulfur hosts for realizing practically usable LSBs.

Lithium-Sulfur Batteries: Advances and Trends

A review with 132 references. Societal and regulatory pressures are pushing industry towards more sustainable energy sources, such as solar and wind power, while the growing popularity of portable cordless electronic devices continues. These trends necessitate the ability to store large amounts of power efficiently in rechargeable batteries that should also be affordable and long-lasting. Lithium-sulfur (Li-S) batteries have recently gained renewed interest for their potential low cost and high energy density, potentially over 2600 Wh kg−1. The current review will detail the most recent advances in early 2020. The focus will be on reports published since the last review on Li-S batteries. This review is meant to be helpful for beginners as well as useful for those doing research in the field, and will delineate some of the cutting-edge adaptations of many avenues that are being pursued to improve the performance and safety of Li-S batteries.