Beyond thermodynamic-based material-screening concepts: Kinetic scaling relations exemplified by the chlorine evolution reaction over transition-metal oxides

Green H2 Generation from Seawater Deploying a Bifunctional Hetero-Interfaced CoS2-CoFe-Layered Double Hydroxide in an Electrolyzer

This work illustrates the practicality and economic benefits of employing a hetero-interfaced electrocatalyst (CoS2@CoFe-LDH), containing cobalt sulphide and iron-cobalt double-layer hydroxide for large-scale hydrogen generation. Here, the rational synthesis and detailed characterization of the CoS2@CoFe-LDH material to unravel its unique heterostructure are essayed. The CoS2@CoFe-LDH operates as a bifunctional electrocatalyst to trigger both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in alkaline seawater (pH 14.0) while showcasing low overpotential requirement for HER (311 mV) and OER (450 mV) at 100 mA cm- 2 current density. The identical CoS2@CoFe-LDH on either electrode in an H-cell setup results in simultaneous H2 and O2 production from seawater with a ≈98% Faradaic efficiency with an applied potential of 1.96V@100 mA cm- 2. Next, this CoS2@CoFe-LDH catalyst is deployed on both sides of a membrane electrode assembly in a one-stack electrolyzer, which retains the intrinsic bifunctional reactivity of the catalyst to generate H2 and O2 in tandem from alkaline seawater with an impeccable energy efficiency (50 kWh kg-1-of-H2). This electrolyzer assembly can be directly linked with a Si-solar cell to produce truly green hydrogen with a solar-to-hydrogen generation efficiency of 15.88%, highlighting the potential of this converting seawater to hydrogen under solar irradiation.

Unusual Ligand Assistance in Molecular Electrocatalysis via Interfacial Proton Charge Assembly

We show that the ability of the ligand to reorganize the electric double layer (EDL) often dominates the electrocatalysis contrary to their inductive effect in the spectrochemical series, leading to counterintuitive electrocatalysis. With water oxidation and chlorine evolution as the probe reactions, the same catalytic entity with carboxy functionalized ligand exhibited surprisingly higher electrochemical activity in comparison to the aggressively electron-withdrawing nitro functionalized ligands, which is contrary to their actual location in the spectrochemical series. Spectroscopic and electrochemical analyses suggest the enrichment of catalytically active species in the carboxy substituted ligand via proton charge assembly in the EDL that in turn enhances the kinetics of the overall electrochemical process. This demonstration of less obvious ligands becoming indispensable in electrocatalysis suggests a blind designing of ligands solely based on their inductive effect should be reconsidered as it will prevent the utilization of the maximum potential of the molecule in electrocatalysis.

Steering Catalytic Selectivity with Atomically Dispersed Metal Electrocatalysts for Renewable Energy Conversion and Commodity Chemical Production

Electrocatalysis is a key driver in promoting the paradigm shift from the current fossil-fuel-based hydrocarbon economy to a renewable-energy-driven hydrogen economy. The success of electrocatalysis hinges primarily on achieving high catalytic selectivity along with maximum activity and sustained longevity. Many electrochemical reactions proceed through multiple pathways, requiring highly selective catalysts.Atomically dispersed metal catalysts have emerged as a new frontier in heterogeneous catalysis. In addition to the widely perceived advantages of maximized active site utilization and substantially reduced metal content, they have shown different catalytic selectivities in some electrocatalytic reactions compared to the traditional nanoparticle (NP)-based catalysts. Although there have been significant advances in their synthesis, the highly energetic nature of a single atomic site has made the preparation of atomically dispersed metal catalysts rely on empiricism rather than rational design. Consequently, the structural comprehension of a single atomic site and the understanding of its unusual electrocatalytic selectivity remain largely elusive.In this Account, we describe our endeavors toward developing general synthetic approaches for atomically dispersed metal catalysts for the discovery of new selective and active electrocatalysts and to understand their catalytic nature. We introduce synthetic approaches to produce a wide range of nonprecious- and precious-metal-based atomically dispersed catalysts and control their coordination environments. Metallomacrocyclic-compound-driven top-down and metal salt/heteroatom layer-based bottom-up strategies, coupled with a SiO₂-protective-layer-assisted method, have been developed that can effectively generate single atomic sites while mitigating the formation of metallic NPs. The low-temperature gas-phase ligand exchange method can reversibly tune the coordination structure of the atomically dispersed metal sites. We have used the prepared atomically dispersed metal catalysts as model systems to investigate their electrocatalytic reactivity for renewable energy conversion and commodity chemical production reactions, in which high selectivity is important. The reactions of our interest include the following: (i) the oxygen reduction reaction, where O₂ is reduced to either H₂O or H₂O₂ via the four-electron or two electron pathway, respectively; (ii) the CO₂ reduction reaction, which should suppress the hydrogen evolution reaction; and (iii) the chlorine evolution reaction, which competes with the oxygen evolution reaction. The type of metal center to which the reactant is directly bound is found to be the most important in determining the selectivity, which originates from the dramatic changes in the binding energy of each metal center with the reactants. The coordination structure surrounding the metal center also has a significant effect on the selectivity; its control can modulate the oxidation state of the metal center, thereby altering the binding strength with the reactants.We envisage that future advances in the synthesis of atomically dispersed metal catalysts, combined with the growing power of computational, spectroscopic, and microscopic methods, will bring their synthesis to the level of rational design. Elaborately designed catalysts can overcome the current limits of catalytic selectivity, which will help establish the field of atomically dispersed metal catalysts as an important branch of catalysis.

Design criteria for the competing chlorine and oxygen evolution reactions: avoid the OCl adsorbate to enhance chlorine selectivity

The formation of gaseous chlorine within chlor-alkali electrolysis is accompanied by a selectivity problem, as the evolution of gaseous oxygen constitutes a detrimental side reaction in the same potential range. As such, the development of electrode materials with high selectivity toward the chlorine evolution reaction is of particular importance to the chemical industry. Insight into the elementary reaction steps is ultimately required to comprehend chlorine selectivity on a molecular level. Commonly, linear scaling relationships are analyzed by the construction of a volcano plot, using the binding energy of oxygen, ΔEO, as a descriptor in the analysis. The present article reinvestigates the selectivity problem of the competing chlorine and oxygen evolution reactions by applying a different strategy compared to previous literature studies. On the one hand, a unifying material-screening framework that, besides binding energies, also includes the applied overpotential, kinetics, and the electrochemical-step symmetry index is used to comprehend trends in this selectivity issue for transition-metal oxide-based electrodes. On the other hand, the free-energy difference between the adsorbed oxygen and adsorbed hydroxide, ΔG2, rather than ΔEO is used as a descriptor in the analysis. It is demonstrated that the formation of the OCl adsorbate within the chlorine evolution reaction inherently limits chlorine selectivity, whereas, in the optimum case, the formation of the Cl intermediate can result in significantly higher chlorine selectivity. This finding is used to derive the design criteria for highly selective chlorine evolution electrocatalysts, which can be used in the future to search for potential electrode compositions by material-screening techniques.