Fast electrodeposition of Ni/Ni(OH)2 nanoparticles on nanoporous Cu prepared by dealloying Zr-Cu amorphous alloy for supercapacitor application

Redox regulation of Ni hydroxides with controllable phase composition towards biomass-derived polyol electro-refinery

Electrocatalytic refinery from biomass-derived glycerol (GLY) to formic acid (FA), one of the most promising candidates for green H2 carriers, has driven widespread attention for its sustainability. Herein, we fabricated a series of monolithic Ni hydroxide-based electrocatalysts by a facile and in situ electrochemical method through the manipulation of local pH near the electrode. The as-synthesized Ni(OH)2@NF-1.0 affords a low working potential of 1.36 VRHE to achieve 100% GLY conversion, 98.5% FA yield, 96.1% faradaic efficiency and ∼0.13 A cm-2 of current density. Its high efficiency on a wide range of polyol substrates further underscores the promise of sustainable electro-refinery. Through a combinatory analysis via H2 temperature-programmed reduction, cyclic voltammetry and in situ Raman spectroscopy, the precise regulation of synthetic potential was discovered to be highly essential to controlling the content, phase composition and redox properties of Ni hydroxides, which significantly determine the catalytic performance. Additionally, the 'adsorption-activation' mode of ortho-di-hydroxyl groups during the C-C bond cleavage of polyols was proposed based on a series of probe reactions. This work illuminates an advanced path for designing non-noble-metal-based catalysts to facilitate electrochemical biomass valorization.

Electrosynthesis of Superhydrophilic Nickel Nanosheets on a Three-Dimensional Microporous Template: Applicability toward MOR

In this report, a nickel nanoscaled morphology was synthesized by two-step cathodic electrodeposition on a microporous copper template. The resulting morphology, nanosheets formed on 3D micropores, offers incredible cyclic stability of almost 100% and facilitates transport mechanisms while significantly preserving the active surface area. The origin of the nanosheets is assumed to be the presence of a small amount of iron cations in the electrolyte bath during the final deposition step. By altering the deposition current density of this step, three samples were prepared and compared in terms of the resulting morphology, chemical composition, surface area, wettability, and activation toward the methanol oxidation Reaction. Results show that an increase in the deposition current density in the range of this study produces finer and denser nanosheets, a higher content of reduced iron, a larger surface area, and greater activity toward MOR. The current density for methanol oxidation was exceptional among all other studies on nickel-containing electrocatalysts, yielding a steady-state current density of 135 mA cm-2 at 600 mV versus SCE. All samples offered superhydrophilicity.

The fabrication of flexible wearable electrodes based on a carbon nanotubes/nickel/nickelous hydroxide ternary composite by facile single-side printing technology

A new material design strategy is developed to prepare high-performance flexible electrochemical electrodes. Carbon nanotubes (CNTs) and nickel/nickelous hydroxide (Ni/Ni(OH)₂) are compounded through a chemical plating method and hydrothermal process. A single-side printing method is used to combine the active material and a flexible cotton substrate. The interfinger microstructure of the textile electrode can greatly facilitate charge/ion transfer at the electrode-electrolyte interface. One side of the fabric, which is untreated, could directly contact with human skin, providing a comfortable and user-friendly surface. With the CNTs/Ni/Ni(OH)₂ ternary composite as a positive electrode and CNTs as a negative electrode, we assembled an in-plane asymmetrical micro-supercapacitor device (SF-NPCs). Thanks to a synergistic effect, SF-NPCs displays a high energy density of 0.29 W h cm^-2 at a power density of 7.2 W cm^-2. The operating window is extended to 1.5 V, and the device displays good potential for applications in the field of smart textiles.

One-step synthesis of Ni(OH)2/MWCNT nanocomposites for constructing a nonenzymatic hydroquinone/O2 fuel cell

In this work, a H-type hydroquinone/O2 fuel cell was assembled and shows high energy density in neutral phosphate buffer solution at moderate temperature. The anodic material, Ni(OH)2/MWCNTs, was synthesized by a one-step hydrothermal synthesis method to oxidize hydroquinone. The cathode material, Pt/MWCNTs, was obtained by an electrodeposition method, and shows great oxygen reduction reaction (ORR) activity. The properties and the morphology of Ni(OH)2/MWCNT nanocomposites were characterized by TEM, XPS, EDS-mapping and electrochemical methods, like cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results show that Ni(OH)2/MWCNTs can effectively oxidize hydroquinone and play a dominant role in enhancing the fuel cell performance. The nonenzymatic fuel cell possesses a high power density of 0.24 mW cm-2 at a cell potential of 0.49 V.