Chemically synthesized graphene as a precursor to Prussian blue-based nanocomposite: A multifunctional material for transparent aqueous K-ion battery or electrochromic device

Thin films based on nanocomposites of crumpled graphene fully decorated with Prussian blue: a new material for aqueous battery systems

This study involves synthesizing thin films through an interfacial method, which relies on composites of Prussian blue nanoparticles and nanostructures derived from graphene, known as crumpled graphene. The resulting compounds were subjected to evaluation for potential applications in aqueous battery-type energy storage systems. Considering the importance of structure-property relationships and applications, the carbon nanostructures were previously processed to assess their morphological characteristics and electrochemical performance for the growth of Prussian blue nanocubes. To this end, the spray-pyrolysis method was employed, resulting in crumpled graphene infused with β-FeOOH and Fe2O3 (β-iron(III) oxyhydroxide and iron (III) oxide) species. Composites of crumpled graphene and Prussian blue were synthesized through the electrodeposition method via cyclic voltammetry, which formed Prussian blue nanocubes on the surface of crumpled graphene with sizes ranging from 48 to 153 nm depending on the number of cycles. Specific capacity values varied based on the compound structure, with the highest recorded value of 50.4 mA h g-1 at a rate of 500 mA g-1 for the PB_10 composite achieved in an aqueous electrolyte of 0.1 mol L-1 KCl vs. Ag|AgCl (3.0 mol L-1 KCl). The PB_10 electrode was further studied using different electrochemical techniques and employed in a coin cell battery system, demonstrating a discharge capacity of 25.0 mA h g-1 at 250 mA g-1. Additionally, the device retained 97% of its capacity after cycling at various current densities, highlighting its stability.

Tailored Nanoarchitectures: MoS₂/Graphene and MoS2/Graphene Oxide Thin Films via Liquid-Liquid Interfacial Route

The nanostructured assembly of different two-dimensional (2D) materials in specific organization is crucial for developing materials with synergistic properties. In this study, we present a general methodology to prepare thin, transparent and self-assembled films of 2D/2D composites based on molybdenum sulfide (MoS2)/graphene oxide (GO) or MoS2/reduced graphene oxide (rGO), through the liquid/liquid interfacial route. Different nanoarchitectures are obtained by changing simple experimental parameters during the thin film preparation steps. The films were characterized by UV-Vis and Raman spectroscopy, scanning electron microscopy and cyclic voltammetry, evidencing that the experimental route used plays a role in the organization and properties of the assembled nanoarchitectures. Likewise, nanostructures of MoS2/GO and MoS2/rGO prepared through the same route have different organizations due to the different interactions between the materials. This showcases the potential of the technique to prepare tailored nanoarchitectures with specific properties for various applications, paving the way for innovative nanotechnology and materials science applications.

Effects of Ion Valence States and Radii on the Performance of Solid-State PEDOT:PSS Electrochromic Devices

Ion transport is a critical factor influencing the performance of electrochromic devices (ECDs). In this work, the effects of the valence state and ionic radius of six cations, Li+, Na+, K+, Mg2+, Zn2+, and Al3+, on the performance of poly(3,4-ethylenedioxythiophene)-polystyrene sulfonic acid (PEDOT:PSS)-based ECDs are investigated. Both ion migration and diffusion are discussed as processes that were analyzed, with results indicating that the primary contributor to the response of ECDs is ion migration. The response time decreases with increasing ionic valence and ionic radius, with the valence state having the predominant effect on response speed. Multivalent ions, due to strong electric field forces, migrate more rapidly and intercalate fewer ions at equivalent reaction charges, thereby facilitating a faster response. ECDs with larger-radius ions, which exhibit slower diffusion rates, also achieve faster response speeds. Among the tested ECDs with various electrolytes, the Al3+-based ECD demonstrates the fastest colored/bleached response time of 0.36/0.4 s. In addition, ions with larger radii introduce greater steric hindrance and structural damage during insertion and extraction, leading to ion retention issues and reduced cycling stability. After 500 cycles (2025 s) under a square wave voltage of ±1.5 V, the peak current of ECDs with Li+ (0.60 Å) electrolyte decreased by only 5.07/5.66%, whereas for K+ (1.33 Å) electrolyte, the decrease was 11.55/12.37%. ECDs utilizing small-radius, higher-valence ions, such as Al3+, achieved both fast response and high cycling stability, with peak current reductions of only 6.98/5.01%. Additionally, the charge storage dynamics were examined by analyzing the contributions from surface-controlled and diffusion-controlled charges, further confirming that ion migration dominates in ECDs. The high contribution of surface-controlled charges (80%) supports the fast response of ECDs and contributes to the high coloration efficiency (592.6 cm2/C for Al3+-based devices).

Freestanding Films of Reduced Graphene Oxide Fully Decorated with Prussian Blue Nanoparticles for Hydrogen Peroxide Sensing

Developing thin, freestanding electrodes that work simultaneously as a current collector and electroactive material is pivotal to integrating portable and wearable chemical sensors. Herein, we have synthesized graphene/Prussian blue (PB) electrodes for hydrogen peroxide detection (H2O2) using a two-step method. First, an reduced graphene oxide/PAni/Fe2O3 freestanding film is prepared using a doctor blade technique, followed by the electrochemical deposition of PB nanoparticles over the films. The iron oxide nanoparticles work as the iron source for the heterogeneous electrochemical deposition of the nanoparticles in a ferricyanide solution. The size of the PB cubes electrodeposited over the graphene-based electrodes was controlled by the number of voltammetric cycles. For H2O2 sensing, the PB10 electrode achieved the lowest detection and quantification limits, 2.00 and 7.00 μM, respectively. The findings herein evidence the balance between the structure of the graphene/PB-based electrodes with the electrochemical performance for H2O2 detection and pave the path for developing new freestanding electrodes for chemical sensors.

Recent advances in rational design for high-performance potassium-ion batteries

The growing global energy demand necessitates the development of renewable energy solutions to mitigate greenhouse gas emissions and air pollution. To efficiently utilize renewable yet intermittent energy sources such as solar and wind power, there is a critical need for large-scale energy storage systems (EES) with high electrochemical performance. While lithium-ion batteries (LIBs) have been successfully used for EES, the surging demand and price, coupled with limited supply of crucial metals like lithium and cobalt, raised concerns about future sustainability. In this context, potassium-ion batteries (PIBs) have emerged as promising alternatives to commercial LIBs. Leveraging the low cost of potassium resources, abundant natural reserves, and the similar chemical properties of lithium and potassium, PIBs exhibit excellent potassium ion transport kinetics in electrolytes. This review starts from the fundamental principles and structural regulation of PIBs, offering a comprehensive overview of their current research status. It covers cathode materials, anode materials, electrolytes, binders, and separators, combining insights from full battery performance, degradation mechanisms, in situ/ex situ characterization, and theoretical calculations. We anticipate that this review will inspire greater interest in the development of high-efficiency PIBs and pave the way for their future commercial applications.

Application of quasi solid electrolytes in organic based electrochromic devices: A mini review

The interest in all solid organic based electrochromic devices (ECDs) is on the increase. This is because these devices offer the applicability of electrochromic materials in products such as smart sensors, smart windows, flexible wearables and energy storage devices. The use of quasi-solid electrolytes for the construction of these ECDs is attractive because of their ease of preparation, availability, low cost, improve electrochromic performance, good ionic conductivity and prevention of leakages in ECDs. Hence, in this review, a detailed discussion is presented on the progress in the development of semi-solid electrolytes for ECDs fabrication. The preparation of the most common electrolytes that have been applied for organic based ECDs are summarized. Particular attention is given to efforts and strategies that have been adopted to improve the efficiency of quasi-solid electrolytes. Importantly, knowledge gaps that warrant further research are clearly identified and recommendations for future works are suggested. This review will be very beneficial for both established and new researchers in the field of electrochromic devices and material science.

Probing the Electronic Structure of Prussian Blue and Analog Films by Photoemission and Electron Energy Loss Spectroscopies

X-ray photoelectron spectroscopy (XPS) and reflection electron energy loss spectroscopy (REELS) were employed to characterize the electronic properties of Prussian blue (PB) and its analogs when electrodeposited over metal-decorated carbon nanotubes (CNTs). Through an investigation of the influence of carbon nanotubes (CNTs) and preparation conditions on the electronic structure, valuable insights were obtained regarding their effects on electrochemical properties. XPS analysis enabled the probing of the chemical composition and oxidation states of the film materials, unveiling synthesis-driven variations in their electronic properties. REELS provided information on energy loss and electronic transitions, enabling further characterization of the changes in the electronic structure induced by different preparation methods. Such findings emphasize the importance of surface characterization to understand how the unique electronic properties of such materials can be harnessed to enhance their performance and functionality.

Nanoarchitected graphene/copper oxide nanoparticles/MoS2 ternary thin films as highly efficient electrodes for aqueous sodium-ion batteries

Sodium-ion batteries (SIBs) operating in aqueous electrolyte are an emerging technology that promises to be safer, cheaper, more sustainable and more efficient than their lithium-based counterparts. One of the great challenges associated with this technology is the development of advanced materials with high specific capacity to be used as electrodes. Herein, we describe an ingenious strategy to prepare unprecedented tri-component nanoarchitected thin films with superior performance when applied as anodes in aqueous SIBs. Taking advantage of the broadness and versatility of the liquid-liquid interfacial route, three transparent nanocomposite films comprising graphene, molybdenum sulphide and copper oxide nanoparticles have been prepared. The samples were characterized using several techniques, and the results demonstrated that depending on the specific experimental strategy, different nanoarchitectures are achieved, resulting in different and improved properties. An astonishing capacity of 1377 mA h g-1 at 0.1 A g-1 and a degree of recovery of 100% were observed for the film in which the interactions among the components were optimized. This is among the highest capacity values reported in the literature and demonstrates the potential of these tri-component materials to be used as anodes in aqueous sodium-ion batteries.

A Comprehensive Evaluation of Battery Technologies for High-Energy Aqueous Batteries

Aqueous batteries have garnered significant attention in recent years as a viable alternative to lithium-ion batteries for energy storage, owing to their inherent safety, cost-effectiveness, and environmental sustainability. This study offers a comprehensive review of recent advancements, persistent challenges, and the prospects of aqueous batteries, with a primary focus on energy density compensation of various battery engineering technologies. Additionally, cutting-edge high-energy aqueous battery designs are emphasized as a reference for future endeavors in the pursuit of high-energy storage solutions. Finally, a dual-compatibility battery configuration perspective aimed at concurrently optimizing cycle stability, redox potential, capacity utilization for both anode and cathode materials, as well as the selection of potential electrode candidates, is proposed with the ultimate goal of achieving cell-level energy densities exceeding 400 Wh kg-1 .

Electrochromic-Induced Rechargeable Aqueous Batteries: An Integrated Multifunctional System for Cross-Domain Applications

Multifunctional electrochromic-induced rechargeable aqueous batteries (MERABs) integrate electrochromism and aqueous ion batteries into one platform, which is able to deliver the conversion and storage of photo-thermal-electrochemical sources. Aqueous ion batteries compensate for the drawbacks of slow kinetic reactions and unsatisfied storage capacities of electrochromic devices. On the other hand, electrochromic technology can enable dynamically regulation of solar light and heat radiation. However, MERABs still face several technical issues, including a trade-off between electrochromic and electrochemical performance, low conversion efficiency and poor service life. In this connection, novel device configuration and electrode materials, and an optimized compatibility need to be considered for multidisciplinary applications. In this review, the unique advantages, key challenges and advanced applications are elucidated in a timely and comprehensive manner. Firstly, the prerequisites for effective integration of the working mechanism and device configuration, as well as the choice of electrode materials are examined. Secondly, the latest advances in the applications of MERABs are discussed, including wearable, self-powered, integrated systems and multisystem conversion. Finally, perspectives on the current challenges and future development are outlined, highlighting the giant leap required from laboratory prototypes to large-scale production and eventual commercialization.

Mixed Cu-Fe Sulfides Derived from Polydopamine-Coated Prussian Blue Analogue as a Lithium-Ion Battery Electrode

Batteries employing transition-metal sulfides enable high-charge storage capacities, but polysulfide shuttling and volume expansion cause structural disintegration and early capacity fading. The design of heterostructures combining metal sulfides and carbon with an optimized morphology can effectively address these issues. Our work introduces dopamine-coated copper Prussian blue (CuPB) analogue as a template to prepare nanostructured mixed copper-iron sulfide electrodes. The material was prepared by coprecipitation of CuPB with in situ dopamine polymerization, followed by thermal sulfidation. Dopamine controls the particle size and favors K-rich CuPB due to its polymerization mechanism. While the presence of the coating prevents particle agglomeration during thermal sulfidation, its thickness demonstrates a key effect on the electrochemical performance of the derived sulfides. After a two-step activation process during cycling, the C-coated KCuFeS₂ electrodes showed capacities up to 800 mAh/g at 10 mA/g with nearly 100% capacity recovery after rate handling and a capacity of 380 mAh/g at 250 mA/g after 500 cycles.

Nickel hexacyanoferrate/graphene thin film: a candidate for the cathode in aqueous metal-ion batteries

A reduced graphene oxide/nickel nanoparticles nanocomposite was used as precursor to synthesize a novel graphene/nickel hexacyanoferrate thin film through a heterogeneous electrochemical reaction with ferricyanide ions in solution.

Liquid-liquid interfaces: a unique and advantageous environment to prepare and process thin films of complex materials

Thin film technology is pervasive for many fields with high impact in our daily lives, which makes processing materials such as thin films a very important subject in materials science and technology. However, several paramount materials cannot be prepared as thin films through the well-known and consolidated deposition routes, which strongly limits their applicability. This is particularly noticeable for multi-component and complex nanocomposites, which present unique properties due to the synergic effect between the components, but have several limitations to be obtained as thin films, mainly if homogeneity and transparence are required. This review highlights the main advances of a novel approach to both process and synthesize different classes of materials as thin films, based on liquid/liquid interfaces. The so-called liquid/liquid interfacial route (LLIR) allows the deposition of thin films of single- or multi-component materials, easily transferable over any kind of substrate (plastics and flexible substrates included) with precise control of the thickness, homogeneity and transparence. More interesting, it allows the in situ synthesis of multi-component materials directly as thin films stabilized at the liquid/liquid interface, in which problems related to both the synthesis and processing are solved together in a single step. This review presents the basis of the LLIR and several examples of thin films obtained from different classes of materials, such as carbon nanostructures, metal and oxide nanoparticles, two-dimensional materials, organic and organometallic frameworks, and polymer-based nanocomposites, among others. Moreover, specific applications of those films in different technological fields are shown, taking advantage of the specific properties emerging from the unique preparation route.

The effect of electrolytes on the electrochromic performance of nickel-substituted tungstophosphate and TiO2 nanowire composite films

A film based on POM and TiO₂ nanowires in Li⁺-based media displays enhanced electrochromic performance compared to that in H⁺-based electrolyte.