Activated carbon-Polyaniline composite active material slurry electrode for high capacitance, improved rheological performance electrochemical flow capacitor

Using a sensitive screen-printed electrode based on printex L6 and polyaniline activated carbon for piroxicam detection

This study reports the development and implementation of a straightforward, rapid, and cost-effective voltammetric technique for piroxicam (PIR) detection at nanomolar concentrations in biological and environmental samples. The method involved the use of a screen-printed electrode (SPE) enhanced with a combination of Printex L6 carbon (PL6C) and polyaniline-based activated carbon (PAC) on a chitosan film crosslinked with epichlorohydrin (CTS:EPH). The detection was carried out using square-wave adsorptive anodic stripping voltammetry (SWAdASV) in a 0.10 mol L-1 phosphate buffer solution at pH 6.0. The approach employed yielded a low limit of detection of 4.5 × 10-9 mol L-1 and a linear range of 5.0 × 10-8 to 8.8 × 10-6 mol L-1 (r = 0.999). The PAC-PL6C-CTS:EPH/SPE sensor was effectively employed for PIR detection in synthetic urine and river water samples, where its reliability was proven through addition and recovery tests. The results obtained from the application of the proposed voltammetric method closely matched those recorded under high-performance liquid chromatography (HPLC), which was used as a reference method. The findings show that the technique proposed in this study offers a simple, quick, and highly effective alternative mechanism for PIR detection in both biological and environmental matrices.

Enhancing electron transfer in anaerobic process by supercapacitor materials: Polyaniline functionated activated carbon

Strengthening the direct interspecies electron transfer (DIET) is an effective strategy to improve the performance of anaerobic digestion (AD) process. In this study, the polyaniline functionated activated carbon (AC-PANi) was prepared by chemical oxidative polymerization. This material possessed pseudo-capacitance properties as well as excellent charge transfer capability. The experimental results demonstrated that the incorporation of AC-PANi in AD process could efficiently increase the chemical oxygen demand (COD) removal (18.6 %) and daily methane production rate (35.3 %). The AC-PANi can also act as an extracellular acceptor to promote the synthesis of adenosine triphosphate (ATP) and secretion of extracellular enzymes as well as cytochrome C (Cyt-C). The content of coenzyme F420 on methanogens was also shown to be increased by 60.9 % with the addition of AC-PANi in AD reactor. Overall, this work provides an easy but feasible way to enhance AD performance by promoting DIET between acetate-producing bacteria and methanogens.

Novel magnetic Fe@NSC nanohybrid material for arsenic removal from aqueous media

Polymer-derived carbon nanohybrids present a remarkable potential for the elimination of water pollutants. Herein, an Fe-modified C, N, and S (Fe@NSC) nanohybrid network, synthesized via polymerization of aniline followed by calcination, is used for As removal from aquatic media. The Langmuir isotherm and pseudo-second-order kinetic models fit well the experimental data for the adsorptive removal of As(III) and As(V) by the as-synthesized Fe@NSC nanohybrid, indicating that adsorption is a monolayer chemisorption process. The maximum adsorption capacities of the fabricated Fe@NSC nanohybrid for As(III) and As(V) were 129.54 and 178.65 mg/g, respectively, which are considerably higher than those reported previously for other adsorbents. In particular, the Fe₃O₄/FeS nanoparticles (18.4-38.7 nm) of the prepared Fe@NSC nanohybrid play a critical role in As adsorption and oxidation. Spectroscopy data indicate that the adsorption of As on Fe@NSC nanohybrid involved oxidation, ligand exchange, surface complexation, and electrostatic attraction. Furthermore, the magnetic Fe@NSC nanohybrid was easily separated after As adsorption using an external magnet and did not induce acute toxicity (48 h) in Daphnia magna. Moreover, the Fe@NSC nanohybrid selectively removed As species in the presence of competing anions and was effectively regenerated for up to three cycles using a 0.1 M HNO₃ solution. These findings suggest that Fe@NSC nanohybrid is a promising adsorbent for As remediation in aquatic media.

High Performance Aqueous Li-Ion Flow Capacitor Realized Through Microstructure Design of Suspension Electrode

Suspension electrode is the core of flowable electrochemical energy storage systems, which are considered suitable for large-scale energy storage. Nevertheless, obtaining suspension electrodes with both low viscosity and high conductivity is still a big challenge. In present work, spinel LiMn₂O₄ was chosen as an example to make suspension with low viscosity and high conductivity through microstructure morphology control of solid particles and the contact mode between active materials and conductive additives in suspension electrode. By coating a thin layer of polyaniline on the surface of spherical spinel LiMn₂O₄, the resulting suspension showed much higher electronic conductivity (about 10 times) and lower viscosity (about 4.5 times) as compared to irregular and bare spinel LiMn₂O₄-based suspension counterpart. As a result, the Li-ion flow capacitor based on LiMn₂O₄ and activated carbon suspensions exhibited a record energy density of 27.4 W h L⁻¹ at a power density of 22.5 W L⁻¹ under static condition to date, and can be smoothly work under an intermittent-flow mode. The strategy reported in this work is an effective way for obtaining suspension electrodes with low viscosity and high electronic conductivity simultaneously. It can not only be used in the flow capacitors, but also can be extended to other flowable electrochemical energy storage systems.