Enhancing electrochemiluminescence of FAPbBr3 nanocrystals by using carbon nanotubes and TiO2 nanoparticles as conductivity and co-reaction accelerator for dopamine determination

Binary-amplifying electrochemiluminescence sensor for sensitive assay of catechol and luteolin based on HKUST-1 derived CuO nanoneedles as a novel luminophore

Herein, a highly novel and effective electrochemiluminescence (ECL) sensor based on metal-organic framework (MOF, HKUST-1) derived CuO nanoneedles (HKUST-1 derived CuO NNs), gold nanoparticles (AuNPs) and TiO2 was developed for ultrasensitive detection of catechol and luteolin. The HKUST-1 derived CuO NNs were employed as luminophore for the first time, which were successfully fabricated by using HKUST-1 as precursor. The results revealed that the HKUST-1 derived CuO NNs exhibit excellent ECL activity ascribed to its abundant active site and the high specific surface area, thus obviously promoting the separation and transfer of charge and further improving the current density of ECL sensor. To binary-amplify the signal of the ECL sensor, the AuNPs and TiO2 nano-materials with good biocompatibility, great electron transport efficiency and high catalytic activity were used as co-reaction accelerators in the ECL process. Dependent on the above brilliant strategy, the proposed ECL sensor achieved wide linear ranges from 3 × 10-9 - 1 × 10-4 M for catechol and 1 × 10-8 - 2 × 10-4 M for luteolin, with the detection limits of 1.5 × 10-9 M for catechol and 5.3 × 10-9 M for luteolin, respectively. Furthermore, the ECL sensor exhibited outstanding selectivity, repeatability, stability and obtained great feedback on determination of catechol and luteolin in actual samples. The method not only filled a gap in the ECL application of MOF-derived materials but also provided a novel sight for design other highly efficient luminescent materials.

Hydrogen-Bonded Organic Cocrystal-Encapsulated Perovskite Nanocrystals as Coreactant-Free Electrochemiluminescent Luminophore for the Detection of Uranium

Lead halide perovskite nanocrystals with excellent photophysical properties are promising electrochemiluminescence (ECL) candidates, but their poor stability greatly restricts ECL applications. Herein, hydrogen-bonded cocrystal-encapsulated CsPbBr3 perovskite nanocrystals (PeNCs@NHS-M) were synthesized by using PeNCs as nuclei for inducing the crystallization of melamine (M) and N-hydroxysuccinimide (NHS). The as-synthesized composite exhibits multiplicative ECL efficiencies (up to 24-fold that of PeNCs) without exogenous coreactants and with excellent stability in the aqueous phase. The enhanced stability can be attributed to the well-designed heterostructure of the PeNCs@NHS-M composite, which benefits from both moiety passivation and protection of the peripheral cocrystal matrix. Moreover, the heterostructure with covalent linkage facilitates charge transfer between PeNCs and NHS-M cocrystals, realizing effective ECL emission. Meanwhile, the NHS and M components act as coreactants for PeNCs, shortening the electron-transport distance and resulting in a significant increase in the ECL signal. Furthermore, by taking advantage of the specific binding effect between NHS-M and uranyl (UO22+), an ECL system with both a low detection limit (1 nM) and high selectivity for monitoring UO22+ in mining wastewater is established. The presence of UO22+ disrupted the charge-transfer effect within PeNCs@NHS-M, weakening the ECL signals. This work provides an efficient design strategy for obtaining stable and efficient ECLs from perovskite nanocrystals, offering a new perspective for the discovery and application of perovskite-based ECL systems.

Signal-Enhanced Immunosensor-Based MOF-Derived ZrO2 Nanomaterials as Electrochemiluminescence Emitter for D-Dimer Detection

Metal oxide nanomaterials have garnered significant attention in the field of electrochemiluminescence (ECL) sensing due to their efficient, stable, and nontoxic properties. However, the current research on metal oxide nanomaterials has primarily focused on their cathodic luminescence properties, with limited reports on their anodic ECL properties. In this study, we utilized MOF-derived ZrO2 nanomaterials as luminophores to generate stable anodic ECL signals in the presence of the coreactant tripropylamine (TPrA). Additionally, a signal-enhancing immunosensor was developed to analyze D-dimer by incorporating the coreaction accelerator Cu-doped TiO2 (TiO2-Cu). The ZrO2 synthesized by calcining UiO-67 demonstrated nontoxicity and biocompatibility, exhibiting efficient and stable ECL emission in a TPrA solution. The inclusion of TiO2-Cu as a coreaction accelerator in the immunosensor resulted in the formation of a ternary system of ZrO2/TiO2-Cu/TPrA. The Cu doping effectively narrowed the bandgap of TiO2 and enhanced its conductivity. As a substrate, TiO2-Cu reacted with more TPrA, generating sufficient free radicals to effectively enhance the ECL signal of ZrO2. In this article, a short peptide ligand, NFC (NARKFYKGC), was designed to immobilize antibodies and maintain the activity of antigen-binding sites during the construction of the immunosensor. The developed immunosensor was used for the accurate detection of D-dimers, with a wide linear range of 0.05-600 ng/mL and a low detection limit of 21 pg/mL..

An efficient aggregation-induced electrochemiluminescent immunosensor by using TiO2 nanoparticles as coreaction accelerator and energy donor for aflatoxin B1 detection

Herein, we fabricated a label-free ECL immunosensor for aflatoxin B₁ (AFB₁) detection. In this system, a small organic aggregation-induced electrochemiluminescence luminophore, 2,5-di-tetraphenylethylene-ylthiazolo [5,4-d] thiazole, was designed, named TPETTZ. Polyaniline-wrapped TiO₂ nanoparticles (PANI/TiO₂ NPs) complex was synthesized through one-step in situ oxidation polymerization of aniline, and performed excellent electrical conductivity and abundant amino groups. As an ECL accelerator, TiO₂ nanoparticles (TiO₂ NPs) promoted the oxidation of tri-n-propylamine (TPA) to generate more TPA^•; in addition, it also acted as a donor to improve the ECL intensity of TPETTZ (acceptor) through electrochemiluminescence resonance energy transfer (ECL-RET). Encouraged by the above, under the existence of TPA, TPETTZ displayed a strong and continuously stable ECL_anode signal due to the introduction of PANI/TiO₂ NPs. Therefore, the immunosensor was constructed for AFB₁ detection based on the quenching effect of target on the ECL signal, and a linearly decreasing ECL signal was obtained as the increasement of AFB₁ in the range of 75 fg/mL to 100 ng/mL, with a lower detection limit of 27.5 fg/mL. Moreover, the as-prepared sensing platform performed a satisfactory anti-interference, stability, and reproducibility, and appeared a good accuracy in walnut sample analysis, presenting a promising application in the future.

Electrochemiluminescent immunoassay enhancement driven by carbon nanotubes

Electrochemiluminescence (ECL) is a leading analytical technique for clinical monitoring and early disease diagnosis. Carbon nanotubes are used as efficient nanomaterials for ECL signal enhancement providing new insights into the mechanism for the ECL generation but also affording application in bead-based immunoassay and ECL microscopy-based bioimaging.

Recent advances in electrochemiluminescence luminophores

Electrochemiluminescence (ECL) has continued to receive considerable attention in various applications, owing to its intrinsic advantages such as near-zero background response, wide dynamic range, high sensitivity, simple instrumentation, and low cost. The ECL luminophore is one of the most significant components during the light generation processes. Despite significant progress that has been made in the synthesis of new luminophores and their roles in resolving various challenges, there are few comprehensive summaries on ECL luminophores. In this review, we discuss some of the recent advances in organic, metal complexes, nanomaterials, metal oxides, and near-infrared ECL luminophores. We also emphasize their roles in tackling various challenges with illustrative examples that have been reported in the last few years. Finally, perspective and some unresolved challenges in ECL that can potentially be addressed by introducing new luminophores have also been discussed. Graphical abstract.

Recent Progress in Electrochemiluminescence of Halide Perovskites

Halide perovskites are a rapidly developing class of solution-processable semiconductors which, to date, have a huge impact across several scientific communities. The remarkable photophysical attributes of halide perovskites illustrate their considerable potential in the electrochemiluminescence (ECL) realm. Over the past 4 years, great progress has been achieved in using halide perovskites as ECL emitters. In this mini-review, the basic characteristics, synthetic approaches, and ECL mechanisms for halide perovskite emitters are first introduced. To the best of our knowledge, most of the reported ECL-active halide perovskites and their disclosed unique features are detailly summarized. Stabilization and interface manipulation strategies for desirable ECL performance are further highlighted. The preliminary halide perovskites-related ECL applications are finally discussed, and prospects are also anticipated.