Role of electrolytes on the electrochemical characteristics of Fe3O4/MXene/RGO composites for supercapacitor applications

Design and Fabrication of MoCuOx Bimetallic Oxide Electrodes for High-Performance Micro-Supercapacitor by Electro-Spark Machining

Transition metal oxides, distinguished by their high theoretical specific capacitance values, inexpensive cost, and low toxicity, have been extensively utilized as electrode materials for high-performance supercapacitors. Nevertheless, their conductivity is generally insufficient to facilitate rapid electron transport at high rates. Therefore, research on bimetallic oxide electrode materials has become a hot spot, especially in the field of micro-supercapacitors (MSC). Hence, this study presents the preparation of bimetallic oxide electrode materials via electro-spark machining (EM), which is efficient, convenient, green and non-polluting, as well as customizable. The fabricated copper-molybdenum bimetallic oxide (MoCuOx) device showed good electrochemical performance under the electrode system. It provided a high areal capacity of 50.2 mF cm-2 (scan rate: 2 mV s-1) with outstanding cycling retention of 94.9% even after 2000 cycles. This work opens a new window for fabricating bimetallic oxide materials in an efficient, environmental and customizable way for various electronics applications.

Flexible Aqueous Supercapacitors for Long Cycle-Life Using Electrode with Multiple Active C═S Sites

Even though a few organic materials have attracted considerable attention for energy storage applications, their dissolution in the electrolyte during the charging-discharging processes presents a formidable challenge to their long-term performance. In this work, according to the principle of like dissolves like, non-polar trithiocyanuric acid (TCA) can effectively inhibit dissolution in an aqueous electrolyte, hence prolonging the cycle life. Moreover, theoretical calculations suggest that TCA lowers lowest unoccupied molecular orbital (LUMO) energy level, thereby promoting reaction kinetics. The CV curves of TCA maintain a rectangular structure even at a high scan rate of 1000 mV s‒1 and exhibit a remarkable capacitance retention rate of 93.1% after 50,000 cycles. Asymmetric flexible supercapacitors utilizing the TCA exhibit an impressive energy density. Moreover, they maintain 94.2% of their capacitance after undergoing 80,000 cycles. Their integration with perovskite solar cells to facilitate the rapid storage of photogenerated charges enables efficient solar energy utilization, providing a practical solution for capturing and storing renewable energy.

Tailoring a facile electronic and ionic pathway to boost the storage performance of Fe3O4 nanowires as negative electrode for supercapacitor application

Today, high-energy applications are devoted to boosting the storage performance of asymmetric supercapacitors. Importantly, boosting the storage performance of the negative electrodes is a crucial topic. Fe3O4-based active materials display a promising theoretical storage performance as a negative electrode. Thus, to get a high storage performance of Fe3O4, it must be tailored to have a higher ionic and electronic conductivity and outstanding stability. Functionalized graphite felt (GF) is an excellent candidate for tailoring Fe3O4 with a facile ionic and electronic pathway. However, the steps of the functionalization of GF are complex and time-consuming as well as the energy loss during this step. Thus, the in-situ functionalization of the GF surface throughout the synthesis of Fe3O4 active materials is proposed herein. Fe3O4 is electrodeposited at the in-situ functionalized GF surface with the crystalline nanowires-like structure as revealed from the various analyses; SEM, TEM, Mapping EDX, XPS, XRD, wettability test, and Raman analysis. Advantageously, the synthetic approach introduces full homogeneous and uniform coverage of the large surface area of the GF. Thus, Fe3O4 nanowires with high ionic and electronic conductivity are characterized by a higher storage performance. Interestingly, Fe3O4/GF possesses a high specific capacity of 1418 mC cm-2 at a potential scan rate of 10 mV s-1 and this value retained to 54% at a potential scan rate of 50 mV s-1 at an extended potential window of 1.45 V. Remarkably, the diffusion-controlled reaction is the main contributor of the storage of Fe3O4/GF electrode as revealed by the mechanistic studies.

A MXene-BiFeO3-ZnO nanocomposite photocatalyst served as a high-performance supercapacitor electrode

MXenes have attracted considerable attention in the field of energy storage and conversion due to their high surface area, excellent electrical conductivity, and ability to intercalate various ions. However, simultaneously achieving high capacitance, rate capability, cycling stability, and mechanical flexibility is a significant challenge for designing MXene-based supercapacitors. In this article, we explored MXene-BiFeO3-ZnO nanocomposites for both photocatalytic and electric double-layer supercapacitor applications. While the BiFeO3-ZnO nanohybrid heterostructure improves the charge separation properties in nanocomposite photocatalysts, it was applied as an interlayer spacer between the MXene layers to prevent the stacking effect of electrodes in the supercapacitor. Furthermore, the optimization of MXene content in the nanocomposite was established by photocatalytic studies on methylene blue dye, which revealed a maximum of 98.72% degradation under direct sunlight with superior stability. The electrochemical studies on the best composition material reveal a maximum areal capacitance (Ccv) of 142.8 mF cm-2, an energy density (E) of 1.65 μW h cm-2, and a capacitive retention of 99.98% after 8000 cycles at 7 μA cm-2. Additionally, the flexible solid-state supercapacitor fabricated with the same material demonstrates an areal capacitance of 47.6 mF cm-2 and a capacitive retention of 66% after 8000 cycles at 7 μA cm-2, with potential for high-performance flexible supercapacitors.

S/N-codoped carbon nanotubes and reduced graphene oxide aerogel based supercapacitors working in a wide temperature range

Among many supercapacitor electrode materials, carbon materials are widely used due to their large specific surface area, good electrical conductivity and high economic efficiency. However, carbon-based supercapacitors face the challenges of low energy density and limited operating environment. This work reports a facile self-assembled method to prepare three-dimensional carbon nanotubes/reduced graphene oxide (CNTs/rGO) aerogel material, which was applied as both positive and negative electrodes in a symmetric superacapacitor. The fabricated supercapacitor exhibited prominent capacitive performance not only at room temperature, but also at extreme temperatures (-20 ∼ 80 °C). The specific capacitances of the symmetric supercapacitors based on CNTs/rGO at a weight ratio of 2:5 respectively reached 107.8 and 128.2 F g^-1 at 25 °C and 80 °C with KOH as the electrolyte, and 80.0 and 144.6 F g^-1 at -20 °C and 60 °C with deep eutectic solvent as the electrolyte. Notably, the capacitance retention and coulombic efficiency of the assembled supercapacitors remained almost unchanged after 20,000 cycles of charge/discharge test over a wide temperature range. The work uncovered a possibility for the development of high-performance supercapacitors flexibly operated at extreme temperatures.

The Influence of a Binder in a Composite Electrode: The Case Study of Vanadyl Phosphate in Aqueous Electrolyte

Layered VOPO₄·2H₂O is synthesized by the sonochemical method. An X-ray powder diffraction is used to examine the crystal structure, while scanning electron microscopy is used to reveal the morphology of the powder. The crystal structure refinement is performed in the P4/nmmZ space group. The electrochemical intercalation of several cations (Na⁺, Mg²⁺, Ca²⁺, and Al³⁺) in saturated nitrate aqueous solutions is investigated. The most notable reversible activity is found for the cycling in aluminium nitrate aqueous solution in the voltage range from -0.1 to 0.8 V vs. SCE. During the preparation of the electrode, it is observed that the structure is prone to changes that have not been recorded in the literature so far. Namely, the use of conventional binder PVDF in NMP solution deteriorates the structure and lowers the powder's crystallinity, while the use of Nafion solution causes the rearrangement of the atoms in a new crystal form that can be described in the monoclinic P2₁/c space group. Consequently, these structural changes affect electrochemical performances. The observed differences in electrochemical performances are a result of structural rearrangements.

MXene/Ferrite Magnetic Nanocomposites for Electrochemical Supercapacitor Applications

MXene has been identified as a new emerging material for various applications including energy storage, electronics, and bio-related due to its wider physicochemical characteristics. Further the formation of hybrid composites of MXene with other materials makes them interesting to utilize in multifunctional applications. The selection of magnetic nanomaterials for the formation of nanocomposite with MXene would be interesting for the utilization of magnetic characteristics along with MXene. However, the selection of the magnetic nanomaterials is important, as the magnetic characteristics of the ferrites vary with the stoichiometric composition of metal ions, particle shape and size. The selection of the electrolyte is also important for electrochemical energy storage applications, as the electrolyte could influence the electrochemical performance. Further, the external magnetic field also could influence the electrochemical performance. This review briefly discusses the synthesis method of MXene, and ferrite magnetic nanoparticles and their composite formation. We also discussed the recent progress made on the MXene/ferrite nanocomposite for potential applications in electrochemical supercapacitor applications. The possibility of magnetic field-assisted supercapacitor applications with electrolyte and electrode materials are discussed.

Microsupercapacitive Stone Module for Natural Energy Storage

Increasing accessibility of energy storage platforms through user interface is significant in realizing autonomous power supply systems because they can be expanded in multidimensional directions to enable pervasive and customized energy storage systems (ESSs) for portable and miniaturized electronics. Herein, we implemented a high-performance asymmetric microsupercapacitor (MSC) on a natural stone surface, which represents a class of omnipresent, low-cost, ecofriendly, and recyclable energy storage interface for sustainable and conveniently accessible ESSs. Highly conductive and porous Cu electrodes were robustly fabricated on a rough marble substrate via explosive reduction-sintering of cost-effective CuO nanoparticles by using instantaneous, inexpensive, and simple laser-material interaction (LMI) technology. Faradaic Fe₃O₄ and capacitive Mn₃O₄ were sequentially electroplated on the surface of the porous Cu interdigitated electrodes to demonstrate hybrid MSC with a high-potential window and specific area. Despite the irregular geometry of the stone interface, the laser-induced MSC module produced high areal energy density and power density (6.55 μWh cm^-2 and 1.2 mW cm^-2, respectively) without the use of complex integrated circuit fabrication methods, such as photolithography, vacuum deposition, or chemical etching. The fabricated MSC stone cells were successfully scaled up via serial or parallel connections to achieve the concept of a scalable energy storage wall applicable as a three-dimensional energy station inside or outside a whole-building interface. The excellent durability of the MSC wall was confirmed by harsh-impact tests, and it was attributed to the robustness of the LMI-derived Cu current collectors and electroplated MSC metal oxides. Furthermore, a natural stone substrate with high mechanical toughness could be recycled by grinding the MSC conductors and active layers, thus considerably reducing the environmental pollutants and helping to realize green electronics.

Roles of Metal Ions in MXene Synthesis, Processing and Applications: A Perspective

With a decade of effort, significant progress has been achieved in the synthesis, processing, and applications of MXenes. Metal ions play many crucial roles, such as in MXene delamination, structure regulation, surface modification, MXene composite construction, and even some unique applications. The different roles of metal ions are attributed to their many interactions with MXenes and the unique nature of MXenes, including their layered structure, surface chemistry, and the existence of multi-valent transition metals. Interactions with metal ions are crucial for the energy storage of MXene electrodes, especially in metal ion batteries and supercapacitors with neutral electrolytes. This review aims to provide a good understanding of the interactions between metal ions and MXenes, including the classification and fundamental chemistry of their interactions, in order to achieve their more effective utilization and rational design. It also provides new perspectives on MXene evolution and exfoliation, which may suggest optimized synthesis strategies. In this respect, the different effects of metal ions on MXene synthesis and processing are clarified, and the corresponding mechanisms are elaborated. Research progress on the roles metal ions have in MXene applications is also introduced.

Enhanced terahertz shielding by adding rare Ag nanoparticles to Ti3C2TxMXene fiber membranes

Polyacrylonitrile/Ti₃C₂T_xMXene/silver nanoparticles fiber membranes with different silver nanoparticles contents and thickness of porous structure have been successfully prepared by electrospinning. Through the measurement of terahertz time domain spectrum, the shielding effect of the fiber membrane with 1% silver nanoparticles content can reach up to 12 dB. Moreover, the thickness of the spinning fiber membranes is controlled by adjusting the spinning time, so as to better analyze the influence of the thickness of the shielding performance in terahertz band. We attribute this excellent phenomenon to porous structure of the spun fiber membrane and combination of Ti₃C₂T_xMXene with few-layers and silver nanoparticles to increase the absorption and conductivity of the fiber membrane, thereby enhancing the shielding effect in terahertz range. Meanwhile, the prepared polyacrylonitrile/Ti₃C₂T_xMXene/silver nanoparticles fiber membranes show good stability and little change in terahertz shielding effect after high temperature annealing. This may provide potential ideas about the development of high-performance terahertz shielding materials, which are of great significance of terahertz electromagnetic shielding.

Graphene oxide and its derivatives as potential Ovchinnikov ferromagnets

Ovchinnikov postulated the possibility of ferromagnetism in organic compounds having a mixed density ofsp³andsp²carbon atoms. Such systems provide an interesting avenue for exploring magnetism in the absence of the quintessentiald- andf-block elements as ingredients. As graphene oxide (GO) and its derivatives naturally possess a mixture ofsp³andsp²carbon atoms, it is pertinent to look at them as potential candidates for Ovchinnikov ferromagnetism. We have looked at the evolution of magnetic property in a series of GO samples with a gradual increase in the degree of oxidation and hence thesp³/sp²fraction. Starting with a GO sample with a highsp³/sp²ratio, we utilize chemical reduction technique to prepare another set of reduced graphene oxide (rGO) samples. Magnetization measurements on these samples further illustrate the importance ofsp³/sp²fraction on magnetic behavior suggesting GO and its derivatives as a potential Ovchinnikov ferromagnet candidate. The evolution of magnetic moment withsp³/sp²carbons can be utilized in carbon based spintronic applications.