Electrochemical behavior of the flower shaped CoMn2O4 spinel structure assembled for effective HER from water splitting

Engineering Mn-doped Co-based heterostructures with oxygen vacancies toward efficient industrial-scale water oxidation catalysis

Developing efficient and durable catalysts for the oxygen evolution reaction (OER) is essential for advancing water-splitting technologies. In this study, we present a self-supported Mn0.10Co0.90-CoCo2O4/NF catalyst featuring a 2D/2D heterostructure, consisting of nanowire arrays coated with ultrathin nanosheets. This unique architecture forms interconnected 3D porous channels, enhancing electrolyte penetration, oxygen diffusion, and mass transport. X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and zeta potential (ζ) measurements reveal that Mn doping facilitates surface reconstruction and increases oxygen vacancies, optimizing the electronic structure and boosting catalytic activity. In situ Raman spectroscopy confirms that CoOOH is the active center, while operando electrochemical impedance spectroscopy demonstrates that strong electronic interactions at the heterogeneous interface enhance charge transfer. The Mn0.10Co0.90-CoCo2O4/NF catalyst exhibits good electrocatalytic performance, achieving low overpotentials (178/233 mV at 10/50 mA cm-2) and exceptional stability (50 mA cm-2 for 280 h) in alkaline electrolytes. This study underscores the synergistic effects of oxygen vacancy engineering, Mn-Co interactions, and a hierarchical structure in improving conductivity, active site accessibility, and reaction kinetics. Mn0.10Co0.90-CoCo2O4/NF emerges as a promising, cost-effective alternative to noble metal catalysts for industrial-scale water electrolysis applications.

Enhance Water Electrolysis for Green Hydrogen Production with Material Engineering: A Review

Water electrolysis, a traditional and highly technology, is gaining significant attention due to the growing demand for renewable energy resources. It stands as a promising solution for energy conversion, offer substantial benefits in environmental protection and sustainable development efforts. The aim of this research is to provide a concise review of the current state-of-the-art in the field of water electrolysis, focusing on the principles of water splitting fundamental, recent advancements in catalytic materials, various advanced characterization methods and emerging electrolysis technology improvements. Moreover, the paper delves into the development trends of catalysts engineering for water electrolysis, providing insight on how to enhance the catalytic performance. With the advancement of technology and the reduction of costs, hydrogen production through water electrolysis is expected to assume a more significant role in future energy ecosystem. This paper not only synthesizes existing knowledge but also highlights emerging opportunities and potential advancements in this field, offering a clear roadmap for further research and innovation.

Hybrid ternary NiCoCu layered double hydroxide electrocatalyst for alkaline hydrogen and oxygen evolution reaction

This study focuses on the electrochemical properties of layered double hydroxide (LDH), which is a specific structure of NiCoCu LDH, and the active species therein, rather than the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) of ternary NiCoCu LDH materials. Six types of catalysts were synthesized using the reflux condenser method and coated onto a nickel foam support electrode. Compared to bare, binary, and ternary electrocatalysts, the NiCoCu LDH electrocatalyst exhibited higher stability. The double layer capacitance (Cdl) of the NiCoCu LDH (12.3 mF cm^-2) is greater than that of the bare and binary electrocatalysts, indicating that the NiCoCu LDH electrocatalyst has a larger electrochemical active surface area. In addition, the NiCoCu LDH electrocatalyst has a lower overpotential of 87 mV and 224 mV for the HER and OER, respectively, indicating its excellent activity with the bare and binary electrocatalysts. Finally, it is demonstrated that the structural characteristics of the NiCoCu LDH contribute to its excellent stability in long-term HER and OER tests.

Electrochemical generation of hydrogen peroxide from a zinc gallium oxide anode with dual active sites

Electrochemical water oxidation enables the conversion of H₂O to H₂O₂. It holds distinct advantages to the O₂ reduction reaction, which is restricted by the inefficient mass transfer and limited solubility of O₂ in aqueous media. Nonetheless, most reported anodes suffer from high overpotentials (usually >1000 mV) and low selectivity. Electrolysis at high overpotentials often causes serious decomposition of peroxides and leads to declined selectivity. Herein, we report a ZnGa₂O₄ anode with dual active sites to improve the selectivity and resist the decomposition of peroxides. Its faradaic efficiency reaches 82% at 2.3 V versus RHE for H₂O₂ generation through both direct (via OH^-) and indirect (via HCO₃^-) pathways. The percarbonate is the critical species generated through the conversion of bicarbonate at Ga-Ga dual sites. The peroxy bond is stable on the surface of the ZnGa₂O₄ anode, significantly improving faradaic efficiency.

Synchronized redox pairs in metal oxide/hydroxide chemical analogues for an efficient oxygen evolution reaction

A two-step electrodeposition of CoMn₂O₄ and its chemical analogue CoMn(OH)_x directly over Ni-foam yields an excellent water oxidation overpotential of 260 mA cm^-2 with a Tafel slope of 29 mV dec^-1 and a four-fold increase in turnover frequency. The enhanced efficacy of the composite catalyst is realized through synchronized redox pairs and superior carrier transport.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

A novel bifunctional catalyst for overall water electrolysis: nano IrxMn(1-x)Oy hybrids with L12-IrMn3 phase

A nano Ir_xMn_(1-x)O_y hybrid electrode with a L1₂-IrMn₃ phase was used as a bifunctional catalyst with ultra-low iridium loading for overall water electrolysis in an acid solution for the first time. The HER activity of the Ir_xMn_(1-x)O_y hybrid electrode not only exceeded that of IrO₂, but also exceeded that of Pt/C. The OER activity of the Ir_xMn_(1-x)O_y hybrid electrode also exceeded that of IrO₂.

In Situ Grown CoMn2 O4 3D-Tetragons on Carbon Cloth: Flexible Electrodes for Efficient Rechargeable Zinc-Air Battery Powered Water Splitting Systems

The integration of energy conversion and storage systems such as electrochemical water splitting (EWS) and rechargeable zinc-air battery (ZAB) is on the vision to provide a sustainable future with green energy resources. Herein, a unique strategy for decorating 3D tetragonal CoMn₂ O₄ on carbon cloth (CMO-U@CC) via a facile one-pot in situ hydrothermal process, is reported. The highly exposed morphology of 3D tetragons enhances the electrocatalytic activity of CMO-U@CC. This is the first demonstration of such a bifunctional activity of CMO-U@CC in an EWS system; it achieves a nominal cell voltage of 1.610 V @ 10 mA cm^-2 . Similarly, the fabricated rechargeable ZAB delivers a specific capacity of 641.6 mAh g_zn ^-1 , a power density of 135 mW cm^-2 , and excellent cyclic stability (50 h @ 10 mA cm^-2 ). Additionally, a series of flexible solid-state ZABs are fabricated and employed to power the assembled CMO-U@CC-based water electrolyzer. To the best of the authors' knowledge, this is the first demonstration of an in situ-grown binder-free CMO-U@CC as a flexible multifunctional electrocatalyst for a built-in integrated rechargeable ZAB-powered EWS system.