3D printing coaxial fiber electrodes towards boosting ultralong cycle life of fibrous supercapacitors

Unraveling and regulating electrode-electrolyte integration towards high-performing MoS2 loaded fiber shaped supercapacitor

Molybdenum disulfide (MoS2) is touted as a highly promising material for fiber-shaped supercapacitors (FSCs) but limited by its low capacitance and unsatisfactory cycling stability. Here, we report a MoS2 deposited stainless steel wire (MoS2@SSW) that can be electrochemically intercalated with dual ions (Na+ and H+). A high capacitance of ∼1632.7 mF cm-2 at 0.4 mA cm-2 and high capacitance retention of 84.25 % after 10,000 cycles under sulfuric acid/sodium sulfate (H2SO4/Na2SO4) aqueous electrolyte is recorded for this system. This is mainly attributed to the pre-intercalation of H+ into MoS2 to form MoS-SH. This process redistributes the local charge regions on MoS2 surface and lowers the energy barrier for Na+ migration in MoS2 to facilitate the adsorption and intercalation of Na+. Notably, MoS2@SSW FSCs are integrated into three-dimensional space textiles as a proof-of-concept. This novel exploration of the nanointerface resulted by electrolyte engineering offers a feasible design paradigm for the development of high-performing FSCs.

Architectural design and optimization of internal structures in 3D printed electrodes for superior supercapacitor performance

The architecture of electrodes plays a pivotal role in the transfer and transportation of charges during electrochemical reactions. Selecting optimal electrode materials and devising well-conceived electrode structures can substantially enhance the electrochemical performance of devices. This manuscript leverages 3D printing technology to fabricate asymmetric supercapacitor devices featuring regular layered configurations. By investigating the impact of various materials on the internal architecture of printed electrodes, we establish a stratified electrode structure with an orderly arrangement, thereby significantly improving asymmetric charge transfer between electrodes. The application of 3D printing technology to construct electrode structures effectively mitigates the agglomeration of electrode materials. The 3D-printed VCG//MXene devices demonstrate exceptional areal capacitance (205.57 mF cm-2) and energy density (60.03 μWh cm-2), with a power density of 0.174 W cm-2. Consequently, selecting appropriate materials for fabricating printable electrode structures and achieving efficient 3D printing is anticipated to offer novel insights into the construction and enhancement of miniature asymmetric micro-supercapacitor (MSCs) devices.

Enhancing Supercapacitor Electrochemical Performance with 3D Printed Cellular PEEK/MWCNT Electrodes Coated with PEDOT: PSS

In this study, we examine the electrochemical performance of supercapacitor (SC) electrodes made from 3D-printed nanocomposites. These composites consist of multiwalled carbon nanotubes (MWCNTs) and polyether ether ketone (PEEK), coated with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). The electrochemical performance of a 3D-printed PEEK/MWCNT solid electrode with a surface area density of 1.2 mm-1 is compared to two distinct periodically porous PEEK/MWCNT electrodes with surface area densities of 7.3 and 7.1 mm-1. To enhance SC performance, the 3D-printed electrodes are coated with a conductive polymer, PEDOT:PSS. The architected cellular electrodes exhibit significantly improved capacitive properties, with the cellular electrode (7.1 mm-1) displaying a capacitance nearly four times greater than that of the solid 3D-printed electrode-based SCs. Moreover, the PEDOT:PSS-coated cellular electrode (7.1 mm-1) demonstrates a high specific capacitance of 12.55 mF·cm-3 at 50 mV·s-1, contrasting to SCs based on 3D-printed cellular electrodes (4.09 mF·cm-3 at 50 mV·s-1) without the coating. The conductive PEDOT:PSS coating proves effective in reducing surface resistance, resulting in a decreased voltage drop during the SCs' charging and discharging processes. Ultimately, the 3D-printed cellular nanocomposite electrode with the conductive polymer coating achieves an energy density of 1.98 μW h·cm-3 at a current of 70 μA. This study underscores how the combined effect of the surface area density of porous electrodes enabled by 3D printing, along with the conductivity imparted by the polymer coating, synergistically improves the energy storage performance.

Stabilizing Ni2+ in Hollow Nano MOF/Polymetallic Phosphides Composites for Enhanced Electrochemical Performance in 3D-Printed Micro-Supercapacitors

Polymetallic phosphides exhibit favorable conductivities. A reasonable design of nano-metal-organic frame (MOF) composite morphologies and in situ introduction of polymetallic phosphides into the framework can effectively improve electrolyte penetration and rapid electron transfer. To address existing challenges, Ni, with a strong coordination ability with N, is introduced to partially replace Co in nano-Co-MOF composite. The hollow nanostructure is stabilized through CoNi bimetallic coordination and low-temperature controllable polymetallic phosphide generation rate. The Ni, Co, and P atoms, generated during reduction, effectively enhance electron transfer rate within the framework. X-ray absorption fine structure (XAFS) characterization results further confirm the existence of Ni-N, Ni-Ni, and Co-Co structures in the nanocomposite. The changes in each component during the charge-discharge process of the electrochemical reactions are investigated using in situ X-ray diffraction (XRD). Theoretical calculations further confirm that P can effectively improve conductivity. VZNPGC//MXene MSCs, constructed with active materials derived from the hollow nano MOF composites synthesized through the Ni2+ stabilization strategy, demonstrate a specific capacitance of 1184 mF cm-2, along with an energy density of 236.75 µWh cm-2 (power density of 0.14 mW cm-2). This approach introduces a new direction for the synthesis of highly conductive nano-MOF composites.

Multilayer Core-Sheath Wires with Radially Aligned N-Doped Carbon Nanohole Arrays for Boosting Energy Storage in Zinc-Ion Hybrid Supercapacitors

Aqueous zinc-ion hybrid supercapacitors (ZHSCs) with the characteristics of low cost, long cycle stability, and good safety have been regarded as potential candidates for wearable energy storage applications. Herein, we reasonably designed a unique binder-free nitrogen-doped (N-doped) porous carbon@TiO2@Ti multilayer core-sheath wire (N-CTNT), which has vertical N-doped carbon nanoholes radially aligned on the wire surface. The unique structure and nitrogen dopants of N-CTNTs have facilitated zinc deposition on N-CTNT to form a hierarchical and robust zinc-carbon composite (Zn@N-CTNTs). A wire-shaped ZHSC was constructed with N-CTNTs and Zn@N-CTNTs as cathode and anode electrodes, respectively. The as-prepared ZHSC has an outstanding specific capacitance of 488 mF cm-2 at 1 mA cm-2. This hybrid supercapacitor also exhibits an excellent energy density of 211 μW h cm-2, good rate performance, and long cycle stability with a capacity retention rate of 90.4% after 16,000 cycles.