Biomass waste-derived nitrogen and iron co-doped nanoporous carbons as electrocatalysts for the oxygen reduction reaction

Hierarchical Porous Fe3C@Fe-N-C Catalysts from Tannin-Fe(III) Complexes for Efficient Oxygen Reduction

The rational design of metal-nitrogen-doped carbons (M-N-C) from available and cost-effective sources featuring high electrocatalytic performance and stability is attractive for the development of viable low-temperature fuel cells. Herein, mimosa tannin, an abundant polyphenol easily extracted from the Mimosa plant, is used as a natural carbon source to produce a tannin-Fe(III) coordination complex. This process is assisted by Pluronic F127, which acts as both a surfactant and a promoter of Fe-Nx active sites. After carbonization in the presence of urea as a nitrogen precursor, this organic tannin-Fe(III) framework produces Fe3C nanoparticles encapsulated on a Fe-N-C single-atom catalyst with hierarchical porosity. The optimal catalyst, with a Pluronic F127/mimosa tannin mass ratio of 0.5, exhibits high ORR performance in both alkaline and acidic electrolytes, with half-wave potentials of 0.87 and 0.74 V versus RHE, respectively. In addition, good performance is achieved in practical hydrogen polymer-electrolyte membrane fuel cells using OH-- or H+-conducting membranes with peak power densities of 242 and 200 mW cm-2 at cell voltages of 0.43 and 0.3 V, respectively. The synthetic approach can be explored to design new renewable M-N-C electrodes for electrochemical energy conversion or storage devices due to tannin's exceptional ability to coordinate metals.

A Passive-Active Anti/Deicing Coating Integrating Superhydrophobicity, Thermal Insulation, and Photo/Electrothermal Conversion Effects

Anti/deicing coatings that combine active and passive methods can utilize various energy sources to achieve anti/deicing effects. However, poor photothermal or electrothermal performance and inevitable heat loss often reduce their anti/deicing efficiency. Herein, copper sulfide loaded activated biochar (AC@CuS) as photo/electric material, polydimethylsiloxane as hydrophobic component, thermally expandable microspheres as foaming agent, and an anti/deicing coating integrating thermal insulation, superhydrophobicity, photo/electrothermal effects was successfully constructed. Benefiting from the synergistic effect of superhydrophobicity and thermal insulation, the freezing time of water droplets on the coating surface is extended from 150 to 2140 s, showing excellent passive anti-icing performance. AC@CuS exhibits photo/electrothermal effects, and porous expanded microspheres reduce heat loss, which endows the coating with desirable photo/electrothermal conversion performance. Under the conditions of 0.2 W/cm2 electric power density (EPD) and 0.1 W/cm2 optical power density (OPD), the temperature of the coating increases from 24 to 96.4 and 113 °C, respectively. Interestingly, with a coheating of 0.05 W/cm2 weaker OPD and 0.05 W/cm2 lower EPD, the ice on the coating surface can be quickly melted in 2.5 min, showing synergistic deicing performance. In addition, the WCA of the prepared coating remains above 150° after mechanical damage, rain impact, UV irradiation, chemical corrosion, and high-temperature treatment, and good superhydrophobic durability ensures the anti/deicing durability of the coating.

Agri-waste derived electroactive carbon-iron oxide nanocomposite for oxygen reduction reaction: an experimental and theoretical study

Herein, we have utilized agri-waste and amalgamating low Fe3+, to develop an economic iron oxide-carbon hybrid-based electrocatalyst for oxygen reduction reaction (ORR) with water as a main product following close to 4e- transfer process. The electrocatalytic activity is justified by electrochemical active surface area, synergetic effect, and density functional theory calculations.

Controllable 3D Flower-Like Ag-CF Electrodes as Flexible Marine Electric Field Sensors with High Stability

Construction of three-dimensional (3D) flower-like nanostructures with controlled morphologies has emerged as an attractive tool by scientists in the marine electric field sensor research field due to their peculiar structural features. Herein, novel 3D flower-like Ag-CF capacitive composite electrodes have been created by an eco-friendly water-bath strategy via AgNO₃ as a sliver source and subsequently compounded with carbon fibers (CFs) pretreated by thermal oxidation. A series of electrode samples with various morphologies obtained by modulating different reaction times and temperatures bring about the dominant formation mechanism of these nanostructures and the influence behavior on the CF electrode in detail. Especially, the 3D flower-like Ag-CF electrode shows a large surface area acquired under the conditions of 80 °C and 15 min, which can provide more electroactive sites in electrochemical analysis and exhibit a maximum areal specific capacitance of 619.75 mF·cm^-2 at a scanning speed of 10 mV·s^-1. This is mainly due to the synergistic behavior of the unique 3D flower-like morphology and the large specific surface area of CFs. Furthermore, a cylinder-shaped Ag-CF sensor is designed, which delivers a superior potential difference of 33.08 μV, a potential difference drift of 18.62 μV/24 h for 30 days, and a self-noise of 0.92 nV/rt (Hz)@1 Hz. In this work, the intriguing synthesis strategy can be a promising facile approach to manufacture the controllable 3D flower-like Ag-CF electrode for electric field sensor applications.

Fe/N codoped porous graphitic carbon derived from macadamia shells as an efficient cathode oxygen reduction catalyst in microbial fuel cells

In this study, Fe/N codoped porous graphitic carbon derived from macadamia shells was prepared at different temperatures as cathodic catalysts for microbial fuel cells (MFCs), with K2FeO4 as a bifunctional catalyst for porosity and graphitization. The catalyst prepared at 750 °C (referred to as MSAC-750) showed a large specific surface area (1670.3 m2 g-1), graphite structure, and high pyridine-N and Fe-N X contents. Through the electrochemical workstation test, MSAC-750 shows excellent oxygen reduction reaction (ORR) activity, with an onset potential of 0.172 V and a half-wave potential of -0.028 V (vs. Ag/AgCl) in a neutral medium, and the ORR electron transfer number is 3.89. When applied to the MFCs as cathodic catalysts, a higher maximum power density and voltage of 378.68 mW m-2 and 0.425 V were achieved with the MSAC-750 catalyst and is superior to that of the Pt/C catalyst (300.85 mW m-2 and 0.402 V). In this case, a promising method is hereby established for the preparation of an excellent electrochemical catalyst for microbial fuel cells using inexpensive and easily available macadamia shells.

Biomass-Based Oxygen Reduction Reaction Catalysts from the Perspective of Ecological Aesthetics—Duckweed Has More Advantages than Soybean

Ecological aesthetics encourages the harmonization of humans and nature. In this paper, we integrate ecological aesthetics into the development of oxygen reduction reaction (ORR) catalysts of H2/O2 fuel cells. Moldy soybean and duckweed as raw materials are adopted to prepare biomass-based ORR catalysts, both of which have advantages in activity, stability, environmental protection and resource richness over the conventional expensive and scarce noble metal-based catalysts. Therefore, duckweed is more environmentally friendly, entails a simpler preparation process and has a better catalytic performance, ultimately being more in line with ecological aesthetics.

Influence of Chemical Activation Temperatures on Nitrogen-Doped Carbon Material Structure, Pore Size Distribution and Oxygen Reduction Reaction Activity

The goal of this research was to synthesize activated nitrogen-doped nanocarbons with high specific surface area and adjustable pore size distribution using wood charcoal as a raw material. The resulting carbon materials were tested for possible application as oxygen reduction reaction catalysts in alkaline media. Activated carbons were obtained using a thermochemical activation method with NaOH. Nitrogen was introduced into activated carbons using dicyandiamide solution. It was demonstrated that the content of introduced nitrogen depends on oxygen content in the structure of the activated carbon. The oxygen reduction reaction activity of the activated and nitrogen-doped carbon material was comparable with a commercial 20% Pt/C catalyst. Electrocatalytic properties of the synthesized N-doped wood-derived carbon catalysts may be associated with the highly developed surface area, specific ratio of micro- and mesopores, as well as the high percentage of pyridinic nitrogen.