In situ growing N and O co-doped helical carbon nanotubes encapsulated with CoFe alloy as tri-functional electrocatalyst applied in Zn–Air Batteries driving Water Splitting

An Overview and Future Perspectives of Rechargeable Flexible Zn-Air Batteries

Environmental friendliness and low-cost zinc-air batteries for flexible rechargeable applications have great potential in the field of flexible electronics and smart wearables owing to high energy density and long service life. However, the current technology of flexible rechargeable zinc-air batteries to meet the commercialization needs still facing enormous challenges due to the poor adaptability of each flexible component of the zinc-air batteries. This review focused on the latest progress over the past 5 years in designing and fabricating flexible self-standing air electrodes, flexible electrolytes and zinc electrodes of flexible Zn-air batteries, meanwhile the basic working principle of each component of flexible rechargeable zinc-air batteries and battery structures optimization are also described. Finally, challenges and prospects for the future development of flexible rechargeable zinc-air batteries are discussed. This work is intended to provide insights and general guidance for future exploration of the design and fabrication on high-performance flexible rechargeable zinc-air batteries.

Developing Superior Hydrophobic 3D Hierarchical Electrocatalysts Embedding Abundant Catalytic Species for High Power Density Zn-Air Battery

It is essential but still challenging to design and construct inexpensive, highly active bifunctional oxygen electrocatalysts for the development of high power density zinc-air batteries (ZABs). Herein, a CoFe-S@3D-S-NCNT electrocatalyst with a 3D hierarchical structure of carbon nanotubes growing on leaf-like carbon microplates is designed and prepared through chemical vapour deposition pyrolysis of CoFe-MOF and subsequent hydrothermal sulfurization. Its 3D hierarchical structure shows excellent hydrophobicity, which facilitates the diffusion of oxygen and thus accelerates the oxygen reduction reaction (ORR) kinetic process. Alloying and sulfurization strategies obviously enrich the catalytic species in the catalyst, including cobalt or cobalt ferroalloy sulfides, their heterojunction, core-shell structure, and S, N-doped carbon, which simultaneously improve the ORR/OER catalytic activity with a small potential gap (ΔE = 0.71 V). Benefiting from these characteristics, the corresponding liquid ZABs show high peak power density (223 mW cm^-2 ), superior specific capacity (815 mA h g_Zn ^-1 ), and excellent stability at 5 mA cm^-2 for ≈900 h. The quasi-solid-state ZABs also exhibit a very high peak power density of 490 mW cm^-2 and an excellent voltage round-trip efficiency of more than 64%. This work highlights that simultaneous composition optimization and microstructure design of catalysts can effectively improve the performance of ZABs.

Dopamine removal from water by advanced oxidative processes with Fe/N-doped carbon nanotubes

Dopamine (DA) is an important neurotransmitter in the human body, and a subnormal level is associated with some neurological problems, such as Alzheimer's and Parkinson's diseases. Its use as medicine has progressively increased, as well as its appearance in water bodies, such as domestic or hospital effluents. Dopamine has been found to produce neurological and cardiac damage to the animals that have consumed water with its content, so the removal of dopamine from water is of utmost importance to ensure water safety. Advanced oxidative processes (AOPs) are one of the most effective technologies to eliminate hazardous and toxic compounds in wastewater. In this work, Fe-based multi-walled carbon nanotubes (MWCNTs) were synthesized by aerosol-assisted catalytic chemical vapor deposition to be applied in the AOP of DA. MWCNTs (carbon nanotubes) exhibited high catalytic activity in removing DA with 99% of elimination.By increasing 4 times the initial concentration of DA, the removal percentage of the molecule was lower than the original one, which was attributed to the DA saturation of active sites. Even so, the percentage of degradation was high (76.2%).

Improved Performance of Composite Bipolar Plates for PEMFC Modified by Homogeneously Dispersed Multi-Walled Carbon Nanotube Networks Prepared by In Situ Chemical Deposition

Composite bipolar plates with excellent performance play a crucial role in improving the overall performance of proton-exchange-membrane fuel cells. However, for graphite/resin composite bipolar plates, their electrical conductivity and mechanical properties are often too complex to meet the needs of users at the same time. Although nanoconductive fillers can alleviate this problem, the performance improvement for composite bipolar plates is often limited due to problems such as agglomeration. In this study, a uniformly dispersed multi-walled carbon nanotube network was prepared by in situ vapor deposition on the surface and pores of expanded graphite, which effectively avoided the problem of agglomeration and effectively improved the various properties of the composite BPs through the synergistic effect with graphite. With the addition of 2% in situ deposited carbon nanotubes, the modified composite bipolar plate has the best conductivity (334.53 S/cm) and flexural strength (50.24 MPa), and all the properties can meet the DOE requirements in 2025. Using the in situ deposition of carbon nanotubes to modify composite bipolar plates is a feasible route because it can result in multi-walled carbon nanotubes in large quantities and avoid the agglomeration phenomenon caused by adding nanofillers. It can also significantly improve the performance of composite bipolar plates, achieving the high performance of composite bipolar plates at a lower cost.

Enhancing the bifunctional activity of CoSe2 nanocubes by surface decoration of CeO2 for advanced zinc-air batteries

The coupling of oxygen evolution and reduction reactions (OER and ORR) plays a key role in rechargeable Zn-air batteries (ZABs). However, both OER and ORR still suffer from sluggish kinetics, even when using the mainstream precious metal-based catalysts. Herein, oxygen vacancies-rich CeO₂ decorated CoSe₂ nanocubes are proposed as a novel air electrode to drive OER and ORR for ZABs. The resultant CeO₂ coupled CoSe₂ nanocubes (CeO₂@CoSe₂-NCs) catalyst exhibits a significantly enhanced bifunctional activity relative to the pristine CoSe₂-NCs and the pristine CeO₂. Moreover, an assembled ZABs using this CeO₂@CoSe₂-NCs electrode delivers a high output power density of 153 mW cm^-2 and a long-life stability over 400 cycles, superior to the benchmark Pt/C-IrO₂ electrode. Theoretical calculations reveal that the electronic interaction and oxygen vacancies in CeO₂@CoSe₂-NCs contribute to efficient oxygen electrocatalysis. This protocol provides a promising approach of constructing oxygen vacancies in hybrid catalysts for energy conversion and storage devices.

ZIF-Derived Metal/N-Doped Porous Carbon Nanocomposites: Efficient Catalysts for Organic Transformations

Recently, zeolitic imidazolate framework (ZIF)-derived metal/N-doped porous carbon nanocomposites (M@NCs) have emerged as a class of appealing heterogeneous catalysts applied in organic synthesis, and the striking features mainly involve low-cost...

Bimetallic persulfide nanoflakes assembled by dealloying and sulfurization: a versatile electro-catalyst for overall water splitting and Zn–air batteries

(CoFe)(S2)2 nanoflakes with graphene-like edges have been synthesized through dealloying and sulfurization, and exhibit multi-functional electro-catalytic performance toward the ORR, OER, HER.