Electrochemical study of the effect of Al3+ on the stability and performance of Cu-based ATRP catalysts in organic media

Synthesis, Characterization and Application of Iron (III) Complex of Schiff Base Ligand as a Novel Enhancement Fluorescent Sensor for Al3+ Ion Detection

This study highlights the importance of developing sensitive and selective sensors for use in pharmaceutical applications for the first time. A novel iron(III)-complex, constructed from unsymmetrical tetradentate NNN'O type Schiff base ligand (E)-3-((6-aminopyridin-2-yl)imino)-1-phenyl butane-1-one (LH) and its structure of it characterized by using various spectroscopic techniques such as FT-IR, UV-Vis, elemental analysis, conductivity, magnetic susceptibility measurements and the TGA method. The correlation of all results revealed that the coordination of the (LH) with the metal ion in a molar ratio of 1:1 leads to the formation of an octahedral geometry around the metal ions. Conductivity data showed the electrolytic nature of the complex. Its fluorescence properties were thoroughly investigated by introducing aluminium ions in deionized water, which increased fluorescence intensity at 460 nm. The detection limit for Al3+ was optimized and found to be 1.5 µM. Notably, the fluorescent sensor successfully monitored Al³⁺ in pharmaceutical formulations. This fluorescence-based analytical method is an alternative to other methods due to its high selectivity, sensitivity, and speed. These results suggest the high potential of this system for pharmaceutical monitoring applications.

Mn-MOF catalyzed multi-site atom transfer radical polymerization electrochemical sensing of miRNA-21

A green electrochemical biosensor was developed based on metal-organic framework (MOF)-catalyzed atom transfer radical polymerization (ATRP) for quantifying miRNA-21, used as the proof-of-concept analyte. Unlike conventional ATRP, Mn-PCN-222 (PCN, porous coordination network) could be used as an alternative for green catalyst to substitute traditional catalysts. First, poly (diallyldimethylammonium chloride) (PDDA) was fixed on the surface of the indium tin oxide (ITO) electrode, and then the Mn-PCN-222 was linked to ITO electrode via electrostatic binding with PDDA. Next, aminated ssDNA (NH₂-DNA) was used to modify the electrode further by amide reaction with Mn-PCN-222. Then, the recognition and hybridization of NH₂-DNA with miRNA-21 prompt the generation of DNA-RNA complexes, which further hybridize with Fc-DNA@β-CD-Br₁₅ and permit the initiator to be immobilized on the electrode surface. Accordingly, β-CD-Br₁₅ could initiate the polymerization of ferrocenylmethyl methacrylates (FcMMA) under the catalysis of MOF to complete the ATRP reaction. FcMMA presented a distinct electrochemical signal at ~ 0.33 V. Taking advantage of the unique multi-site properties of β-CD-Br₁₅ and the efficient catalytic reaction induced by Mn-PCN-222, ultrasensitive detection of miRNA-21 was achieved with a detection limit of 0.4 fM. The proposed electrochemical biosensor has been applied to the detection of miRNA-21 in serum samples. Therefore, the proposed strategy exhibited potential in early clinical biomedicine.

Vanadium Dioxide Nanosheets Supported on Carbonized Cotton Fabric as Bifunctional Textiles for Flexible Pressure Sensors and Zinc-Ion Batteries

Flexible pressure sensors and aqueous batteries have been widely used in the rapid development of wearable electronics. The synergistic functionalities of versatile materials with multidimensional architectures are recognized to have a significant impact on the performance of flexible electronics. Herein, a facile hydrothermal strategy was demonstrated to conformally grow vanadium dioxide nanosheets on carbonized cotton fabrics (VO₂/CCotton), which is a candidate material used in flexible piezoresistive sensors. As a result, the VO₂/CCotton-based pressure sensor behaved with high sensitivity (S = 7.12 kPa^-1 in the pressure range of 0-2.0 kPa) and a stable sensing ability in a wide pressure scale of 0-120 kPa. Further practical applications were performed in monitoring delicate physiological signals as well, such as twisting, blowing, and voice vibration recognitions. In addition, another application for energy storage was investigated as well. A quasi-solid-state aqueous zinc-ion battery was assembled with VO₂/CCotton as the cathode and a film of Zn nanosheets/carbon nanotube as the anode. A capacity as high as 301.5 mAh g^-1 and remarkable durability of 88.7% capacity retention after 5000 cycles at 10 A g^-1 were found. These exceptional outcomes are attributed to the unique three-dimensional architecture and the prominent synergetic effects of CCotton and VO₂ and allow for the proposal of novel guidelines for next-generation multifunctional flexible electronics.

Dual electrochemical and chemical control in atom transfer radical polymerization with copper electrodes

In Atom Transfer Radical Polymerization (ATRP), Cu⁰ acts as a supplemental activator and reducing agent (SARA ATRP) by activating alkyl halides and (re)generating the Cu^I activator through a comproportionation reaction, respectively. Cu⁰ is also an unexplored, exciting metal that can act as a cathode in electrochemically mediated ATRP (eATRP). Contrary to conventional inert electrodes, a Cu cathode can trigger a dual catalyst regeneration, simultaneously driven by electrochemistry and comproportionation, if a free ligand is present in solution. The dual regeneration explored herein allowed for introducing the concept of pulsed galvanostatic electrolysis (PGE) in eATRP. During a PGE, the process alternates between a period of constant current electrolysis and a period with no applied current in which polymerization continues via SARA ATRP. The introduction of no electrolysis periods without compromising the overall polymerization rate and control is very attractive, if large current densities are needed. Moreover, it permits a drastic charge saving, which is of unique value for a future scale-up, as electrochemistry coupled to SARA ATRP saves energy, and shortens the equipment usage.

The use of a Cu cathode in eATRP allows exploiting the synergistic effect between electrochemical and chemical stimuli to halt or accelerate polymerizations, reduce energy consumption and achieve control in challenging systems.

Current-controlled ‘plug-and-play’ electrochemical atom transfer radical polymerization of acrylamides in water

Aqueous electrochemical atom transfer radical polymerisation (eATRP) can be challenging due to deleterious side reactions leading to the loss of the ω-chain end, increased rates of activation (k¬act) leading to...

Biodegradable PCL-b-PLA Microspheres with Nanopores Prepared via RAFT Polymerization and UV Photodegradation of Poly(Methyl Vinyl Ketone) Blocks

Biodegradable triblock copolymers based on poly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) were synthesized via ring-opening polymerization of L-lactide followed by reversible addition–fragmentation chain-transfer (RAFT) polymerization of poly(methyl vinyl ketone) (PMVK) as a photodegradable block, and characterized by FT-IR and ¹H NMR spectroscopy for structural analyses, and by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) for their thermal properties. Porous, biodegradable PCL-b-PLA microspheres were fabricated via the oil/water (O/W) emulsion evaporation method, followed by photodegradation of PMVK blocks by UV irradiation. The macro-chain transfer agent (CTA) synthesized by reacting a carboxylic-acid-terminated CTA—S-1-dodecyl-S′-(a,a′-dimethyl-a′′-acetic acid)trithiocarbonate (DDMAT)—with a hydroxyl-terminated PCL-b-PLA block copolymer was used to synthesize well-defined triblock copolymers with methyl vinyl ketone via RAFT polymerization with controlled molecular weights and narrow polydispersity. Gel permeation chromatography traces indicated that the molecular weight of the triblock copolymer decreased with UV irradiation time because of the photodegradation of the PMVK blocks. The morphology of the microspheres before and after UV irradiation was investigated using SEM and videos of three-dimensional confocal laser microscopy, showing a change in their surface texture from smooth to rough, with high porosity owing to the photodegradation of the PMVK blocks to become porous templates.