Microstructure control for high-capacitance polyaniline

Synthesis and characterization of polyaniline-based composites using cellulose nanocrystals as biological templates

Polyaniline (PANI) is considered as an ideal electrode material due to its remarkable Faradaic activity, exceptional conductivity, and ease of processing. However, the agglomeration and poor cycling stability of PANI largely limit its practical utilization in energy storage devices. To address these challenges, PANI was synthesized via a facile one-pot, two-step process using cellulose nanocrystals (CNCs) as bio-templates in this work. Zeta potential and particle size measurements revealed that the CNC template could impart improved dispersion stability to the synthesized PANI, which exhibited a decrease in average particle size from 1100 nm to 300 nm as a function of 10 % CNCs. Furthermore, the effect of CNC loadings on the performance of PANI was systematically investigated. The results showed that the specific capacitance of PANI/CNC increased from 102.52 F·g-1 to 138.12 F·g-1 with the CNC loading increase from 0 to 10 wt%. Particularly, the PANI/CNC composite film with a 1:9 ratio (C-P-10 %) demonstrated a capacity retention of 84.45 % after 6000 cycles and an outstanding conductivity of 526 S·m-1. This work generally offers an effective solution for the preparation of high-performance PANI-based composites, which might hold great promise in energy storage device applications.

Designing Electrical Stimulation Platforms for Neural Cell Cultivation Using Poly(aniline): Camphorsulfonic Acid

Electrical stimulation is a powerful strategy to improve the differentiation of neural stem cells into neurons. Such an approach can be implemented, in association with biomaterials and nanotechnology, for the development of new therapies for neurological diseases, including direct cell transplantation and the development of platforms for drug screening and disease progression evaluation. Poly(aniline):camphorsulfonic acid (PANI:CSA) is one of the most well-studied electroconductive polymers, capable of directing an externally applied electrical field to neural cells in culture. There are several examples in the literature on the development of PANI:CSA-based scaffolds and platforms for electrical stimulation, but no review has examined the fundamentals and physico-chemical determinants of PANI:CSA for the design of platforms for electrical stimulation. This review evaluates the current literature regarding the application of electrical stimulation to neural cells, specifically reviewing: (1) the fundamentals of bioelectricity and electrical stimulation; (2) the use of PANI:CSA-based systems for electrical stimulation of cell cultures; and (3) the development of scaffolds and setups to support the electrical stimulation of cells. Throughout this work, we critically evaluate the revised literature and provide a steppingstone for the clinical application of the electrical stimulation of cells using electroconductive PANI:CSA platforms/scaffolds.

An enhanced chemiluminescence hybrids of luminol by sulfonated polyaniline decorated copper-based metal organic frame composite applicable to the measurement of hydrogen peroxide in a wide pH range

Here, sulfonated polyaniline (SPAN) was decorated on the surface of copper-based metal organic frame (HKUST-1) and the composite was functionalized by luminol to construct a chemiluminescence (CL) hybrids (SPAN/HKUST-1@Luminol). The as-prepared SPAN/HKUST-1@Luminol demonstrated a great dispersion and stability performance in aqueous solution. Moreover, the resultant SPAN/HKUST-1@Luminol hybrids exhibited extremely strong CL properties, and the CL quantum yield was 136 times higher than that of luminol. In particular, it exhibited outstanding CL activity not only under alkaline conditions, but also under neutral conditions. The sensitive response of the hybrid to hydrogen peroxide was used to construct CL methods for the detection of hydrogen peroxide at a wide range of pH, with the detection limit of 60 nM at a neutral condition and 25 pM at alkaline condition. Due to strong and stable signal of the SPAN/HKUST-1@Luminol, the CL method provides a viable tool for determination of H₂O₂ in biological systems and enabled the monitoring of stimulated production of H₂O₂ released by living cells.

Selective reduction of nitrite to nitrogen by polyaniline-carbon nanotubes composite at neutral pH

The selective reduction of nitrite (NO₂^-) to nitrogen by chemical reductant is a desirable strategy to remove NO₂^- from polluted water and wastewater. However, the residue and reuse of chemical reductant are two main issues to be addressed. Herein, a novel polyaniline-carbon nanotubes composite (PANI-CNTs) was developed by in-situ polymerization to selectively reduce NO₂^- to nitrogen gas (N₂). The used PANI-CNTs could be reused after regeneration with NaBH₄. The PANI-CNTs could reduce NO₂^- with 93.9% N₂ selectivity at initial pH of 6.8. The NO₂^- removal efficiency only decreased by 12.08% after five cycles of reduction/regeneration. The interconversion between imine nitrogen (-N) and amine nitrogen (-NH-) groups induced the chemical reduction of NO₂^- and regeneration of PANI-CNTs. PANI-CNTs exhibited an excellent performance for the removal of NO₂^- in the presence of competitive ions and in actual water and wastewater samples. This new PANI-CNTs composite may have great potential for water purification and wastewater denitrification.

Copper and palladium bimetallic sub-nanoparticles were stabilized on modified polyaniline materials as an efficient catalyst to promote C-C coupling reactions in aqueous solution

Modified polyaniline self-stabilizing Cu/Pd bimetallic sub-nanocluster composite materials (Cu/Pd@Mod-PANI-3OH) are obtained through the three steps of oxidative polymerization, structural modification, and metal self-trapping. Palladium and copper are confined and coordinated in the composite material by participating in the reaction and are highly uniformly dispersed in the carrier in the form of sub-nano clusters. The Cu/Pd@Mod-PANI-3OH micro-nano reactor catalyst formed by the self-assembly of copper, palladium and polyaniline has excellent electronic effects, including a tunable microenvironment, metal-carrier and metal-metal synergy, and the stabilizing effect of metal by polyaniline materials. It can efficiently catalyse C-C coupling (Sonogashira and Suzuki) reactions in aqueous solution with high catalytic activity and a wide range of applications (40 substrates). The characterization test results show that the Cu/Pd@Mod-PANI-3OH composite material obtained by self-trapping metal is a kind of prefabricated catalyst. During the reaction process, the high-valent metals in the pre-catalyst are in situ converted into active zero-valent metals. The catalyst's pre-fabrication strategy well protects the catalytic active centre, largely prevents agglomeration of the metal particles (can be recycled 8 times) and exhibits excellent interfacial domain-limited catalysis. The research strategy of modulation of catalytic active sites to improve the properties of materials at the molecular and atomic level reported in this article will open a new door in the research of polyaniline materials.