Sub-nanometer thin TiO2-coating on carbon support for boosting oxygen reduction activity and durability of Pt nanoparticles

Recent Progress in the Design and Application of Strong Metal-Support Interactions in Electrocatalysis

The strong metal-support interaction (SMSI) in supported metal catalysts represents a crucial factor in the design of highly efficient heterogeneous catalysts. This interaction can modify the surface adsorption state, electronic structure, and coordination environment of the supported metal, altering the interface structure of the catalyst. These changes serve to enhance the catalyst's activity, stability, and reaction selectivity. In recent years, a multitude of researchers have uncovered a range of novel SMSI types and induction methods including oxidized SMSI (O-SMSI), adsorbent-mediated SMSI (A-SMSI), and wet chemically induced SMSI (Wc-SMSI). Consequently, a systematic and critical review is highly desirable to illuminate the latest advancements in SMSI and to deliberate its application within heterogeneous catalysts. This article provides a review of the characteristics of various SMSI types and the most recent induction methods. It is concluded that SMSI significantly contributes to enhancing catalyst stability, altering reaction selectivity, and increasing catalytic activity. Furthermore, this paper offers a comprehensive review of the extensive application of SMSI in the electrocatalysis of hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and carbon dioxide reduction reaction (CO2RR). Finally, the opportunities and challenges that SMSI faces in the future are discussed.

Advanced Pt/Ti(1-x)SnxO2-C Composite Supported Electrocatalyst with Functionalized Carbon for Sustainable Energy Conversion Technologies

Sn-doped TiO2-carbon composites were identified as promising multifunctional supports for Pt electrocatalysts, in which the oxide component enhances resistance against corrosion and strong metal-support interactions at the Pt-oxide boundary ensure high stability for the Pt nanoparticles. This work is devoted to the study of the influence of preliminary functionalization of the carbon on the properties of Pt/Ti0.9Sn0.1O2-C catalysts. The structural, compositional and morphological differences between the samples prepared using functionalized or unmodified carbon, as well as the effect of carbon pre-modification on the electrocatalytic behavior of the synthesized Pt catalysts, were investigated using TEM, XRD, XPS, nitrogen adsorption and electrochemical measurements. The presence of oxygen-containing functional groups on carbon treated with HNO3 and glucose leads to the formation of a homogeneous coating of the carbon with dispersed crystallites of mixed oxide. Elemental mapping revealed the proximity of Sn species with highly dispersed (2-3 nm) Pt particles. Notably, the electrochemical results indicated enhanced activity in CO electrooxidation for both functionalized and unmodified carbon-containing catalysts. An improvement in the 10,000-cycle long-term stability of the catalyst prepared using functionalized carbon was evident compared to the catalyst with untreated carbon or reference Pt/C.

Janus structural TaON/Graphene-like carbon dual-supported Pt electrocatalyst enables efficient oxygen reduction reaction

Developing carbon-supported Pt-based electrocatalysts with high activity and long-durability for the oxygen reduction reaction (ORR) is an enormous challenge for their commercial applications due to the corrosion of carbon supports in acid/alkaline solution at high potential. In this work, a Janus structural TaON/graphene-like carbon (GLC) was synthesized via an in-situ molecular selfassembly strategy, which was used as a dual-carrier for platinum (Pt). The as-obtained Pt/TaON/GLC presents high half-wave potential (0.94 V vs. RHE), excellent mass (1.48 A mgPt-1) and specific (1.75 mA cmPt-2) activities at 0.9 V, and superior long-term durability with a minimal loss (8.0 %) of mass activity after 10,000 cycles in alkaline solution, outperforming those of Pt/C and other catalysts. The structural characterizations and density functional theory (DFT) calculations indicate that the Pt/TaON/GLC catalyst exhibits the maximum synergies, including enhanced interfacial electron density, improved charge transfer, enhanced O2 adsorption, andsuperimposed OO cleavage. This work shows a potential strategy for preparing the high-active and long-durable Pt-based electrocatalyst by synergism-promoted interface engineering.

Recent progress in the development of advanced support materials for electrocatalysis

Electrocatalytic materials are pivotal for clean chemical production and energy conversion in devices like electrolyzers and fuel cells. These materials usually consist of metallic nanoparticles which serve as active reaction sites, and support materials which provide high surface area, conductivity and stability. When designing novel electrocatalytic composites, the focus is often on the metallic sites, however, the significance of the support should not be overlooked. Carbon materials, valued for their conductivity and large surface area, are commonly used as support in benchmark electrocatalysts. However, using alternative support materials instead of carbon can be beneficial in certain cases. In this minireview, we summarize recent advancements and key directions in developing novel supports for electrocatalysis, encompassing both carbon and non-carbon materials.

Coating Porous TiO2 Films on Carbon Nanotubes to Enhance the Durability of Ultrafine PtCo/CNT Nanocatalysts for the Oxygen Reduction Reaction

The development of excellent activity and durability catalysts for the oxygen reduction reaction (ORR) is essential for the commercialization of proton exchange membrane fuel cells (PEMFCs). Reducing the size of catalyst particles can provide more reaction sites to mitigate the performance degradation caused by reduced platinum loading. However, at the same time, it makes the particles more prone to agglomeration and exfoliation, leading to a rapid reduction in catalyst activity. Here, we present the design of a composite support (TiO₂/CNT) with a porous TiO₂ film that immobilizes PtCo nanoparticles (NPs) loaded on the support while protecting the carbon nanotubes inside. The particle size of PtCo NPs was only 1.99 nm (determined by transmission electron microscopy), but the nanocatalyst (PtCo/TiO₂/CNT) maintained high catalytic performance and stability on account of the strong metal support interaction (SMSI). PtCo/TiO₂/CNT exhibited a high mass activity (MA, 0.476 A mg_Pt^-1) and was found to have MA retention rates of 91.7 and 88.8% in durability tests performed at 0.6-1.0 V and 1.0-1.5 V, respectively.

Anchoring Highly Dispersed Pt Electrocatalysts on TiOx with Strong Metal-Support Interactions via an Oxygen Vacancy-Assisted Strategy as Durable Catalysts for the Oxygen Reduction Reaction

Pt electrocatalysts with high activity and durability have still crucial issues for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). In this study, a novel catalyst consisting of Pt nanoparticles (NPs) on TiO_x/C composites (TiO_x-V_o-H/C) with abundant oxygen vacancies (V_o) is proposed, which is abbreviated as PTO-V_o-H/C. The introduction of V_o helps anchor highly dispersed Pt NPs with low loading and strengthen the strong metal-support interaction (SMSI), which benefits to the enhanced ORR catalytic activity. Moreover, the accelerated durability test (ADT) demonstrates the higher retention of ORR activity for PTO-V_o-H/C. Experimental and theoretical analyses reveal that electronic interactions between Pt NPs and TiO_x/C composite support give rise to an electron-rich Pt NPs and strong SMSI effect, which is favorable for the electron transfer and stabilization of Pt NPs. More importantly, the assembled PEMFC with PTO-V_o-H/C shows only 6.9% of decay on maximum power density after 3000 ADT cycles while the performance of Pt/C sharply decreased. This work provides a new insight into the unique vacancy regulation of dispersive Pt on metal oxides for superior ORR performance.