Facile controlled formation of CoNi alloy and CoO embedded in N-doped carbon as advanced electrocatalysts for oxygen evolution and zinc-air battery

Recent Advances in Mesoporous Carbon Nitride-Based Materials for Electrochemical Energy Storage and Conversion and Gas Storage

Mesoporous carbon nitride (MCN) is a fascinating material with enhanced textural properties, tailored morphology and enriched surface functionalities. Hence, it demonstrates promising performance in various applications. Over the years, various methods such as hard template, soft template, template-free, etc. have been adopted toward the preparation of MCN with controlled structural properties. Furthermore, the exciting properties of MCN have been fine-tuned by controlling the morphology and tuning the textural properties and surface functionalities, including the type and amount of nitrogen, via simple adjustment of the precursors, the carbonization temperature and the nature of the structure-directing agents/hard template. Besides these, the integration of conductive carbon, heteroatoms, metal-based materials, organic molecules, etc. was found to not only enhance MCN's performance in the already existing applications but also open up more exciting applications. The present Review begins by providing a general overview of the salient features of MCN, which dictate its performance in the various applications. Then, the Review discusses the trends in the applications of MCN-based material in the areas of electrochemical energy storage and conversion and gas storage in the past decade. The structure-property relationships of MCN-based materials in the above-mentioned applications are also discussed in detail. Emphasis is given to the role of the synthetic approach adopted and the nature of the precursor(s) used toward controlling the textural, morphological properties and chemical composition of MCN-based materials in obtaining the final product with improved performance. Moreover, the effects of modifications of key features of MCN on its electrochemical performance are also discussed. Finally, the current challenges and perspectives are provided, thereby guiding future research in the field of MCN-based materials for electrochemical energy storage and conversion and gas storage.

Rational Design of Core-Shell MoS2@ZIF-67 Nanocomposites for Enhanced Photocatalytic Degradation of Tetracycline

Zeolitic imidazolate frameworks (ZIFs) and their composites are attractive materials for photocatalytic applications due to their distinct characteristics. Core-shell ZIFs have lately emerged as a particularly appealing type of metal-organic frameworks, with improved light-absorption and charge-separation capabilities. In this study, hybrid nanocomposite materials comprising a zeolitic imidazolate framework-67 and molybdenum disulfide (MoS2) were fabricated with a core-shell structure. The prepared core-shell MoS2@ZIF-67 nanocomposites were studied using XRD, FTIR, XPS, and HR-TEM techniques. The crystalline nature and the presence of characteristic functional groups of the composites were analyzed using XRD and FTIR, respectively. The photocatalytic degradation of antibiotic tetracycline (TC) was measured using visible light irradiation. Compared to pristine MoS2 (12%) and ZIF-67 (34%), the most active MoS2@ZIF-67 nanocomposite (72%) exhibited a greater tetracycline degradation efficacy.

Chitosan derived N-doped carbon anchored Co3O4-doped MoS2 nanosheets as an efficient peroxymonosulfate activator for degradation of dyes

Peroxymonosulfate (PMS), which is dominated by non-free radical pathway, has a good removal effect on organic pollutants in complex water matrices. In this article, a biodegradable cobalt-based catalyst (Co3O4/MoS2@NCS) was synthesized by a simple hydrothermal method with chitosan (CS) as nitrogen‑carbon precursor and doped with Cobaltic‑cobaltous oxide (Co3O4) and Molybdenum disulfide (MoS2), and was used to activate PMS to degrade dye wastewater. Electrochemical tests showed that Co3O4/MoS2@NCS exhibited higher current density and cycling area than MoS2@NCS and MoS2. In the Co3O4/MoS2@NCS/PMS system, the degradation rate of 30 mg·L-1 rhodamine B (RhB) reached 97.75 % within 5 min, and kept as high as 94.34 % after 5 cycles. Its rate constant was 1.91 and 8.37 times that of MoS2@NCS/PMS and MoS2/PMS, respectively. It had good complex background matrices and acid-base anti-interference ability, and had good universality and reusability. The degradation rate of methyl orange (MO) and methylene blue (MB) were more than 91 % within 5 min at pH 4.8. The experimental results demonstrated that MoS2-modified CS as a carrier exposed a large number of active sites, which not only dispersed Co3O4 nanoparticles and improved the stability of the catalyst, but also provided abundant electron rich groups, and promoted the activation of PMS and the production of reactive oxygen species (ROS). PMS was effectively activated by catalytic sites (Co3+/Co2+, Mo4+/Mo5+/Mo6+, CO, pyridine N, pyrrole N, hydroxyl group and unsaturated sulfur), producing a large number of radicals that attack RhB molecules, causing chromophore cleavage, ring opening, and mineralization. Among them, non-free radical 1O2 was the main ROS for RhB degradation. This work is expected to provide a new idea for the design and synthesis of environmentally friendly and efficient MoS2-modified cobalt-based catalysts.

Cobalt-Doped Iron Phosphate Crystal on Stainless Steel Mesh for Corrosion-Resistant Oxygen Evolution Catalyst

We report an oxygen evolution reaction (OER) catalyst prepared by the incorporation of cobalt-doped iron phosphate on stainless steel mesh (SSM) through a one-step hydrothermal method. Compared to the catalytic property of bare SSM, our OER catalyst (0.84-CoFePi) showed a 42% improvement in current density at the potential of 1.9 V vs. RHE, and the onset potential was decreased by 26.5 mV. Furthermore, the loss in current density of bulk electrolysis after 12 h in 1 M KOH (pH 14) solution and 0.0441 wt% H2SO4 (pH ≈ 3) containing 0.1 M NaCl solution was negligible (3.1% and 3.2%, respectively). Moreover, our cobalt-doped iron phosphate on SSM exhibits the dramatic improvement in corrosion resistance to a basic, mild acidic solution and chloride ions compared to bare SSM.

Manufacturing Technics for Fabric/Fiber-Based Triboelectric Nanogenerators: From Yarns to Micro-Nanofibers

Triboelectric nanogenerator (TENG), as a green energy harvesting technology, has aroused tremendous interest across many fields, such as wearable electronics, implanted electronic devices, and human-machine interfaces. Fabric and fiber-structured materials are excellent candidates for TENG materials due to their inherent flexibility, low cost, and high wearing comfort. Consequently, it is crucial to combine TENG with fabric/fiber materials to simultaneously leverage their mechanical energy harvesting and wearability advantages. In this review, the structure and fundamentals of TENG are briefly explained, followed by the introduction of three distinct methods for preparing fabric/fiber structures: spinning and weaving, wet spinning, and electrospinning. In the meantime, their applications have been discussed, focusing primarily on energy harvesting and wearable self-powered sensors. Finally, we discussed the future and challenges of fabric and fiber-based TENGs.

Flower-like molybdenum disulfide decorated ZIF-8-derived nitrogen-doped dodecahedral carbon for electro-catalytic degradation of phenol

In this work, flower-like molybdenum disulfide was constructed on the surface of ZIF-8-derived nitrogen-doped dodecahedral carbon (ZNC) for the electrocatalytic degradation of phenol. The flower-like nanostructure of MoS₂@ZNC contributed to the exposure of more edge-active sites of MoS₂. At the same time, Mo⁴⁺ and Mo⁶⁺ co-existed in MoS₂@ZNC, which promoted the generation of H₂O₂ and •OH, and improved the catalytic activity of composite materials. In addition, electrochemical performance analysis showed that MoS₂ loaded on the surface of ZNC significantly improved the redox capacity of the material, and the composite ratio of MoS₂ and ZNC affected the structure and properties of MoS₂@ZNC composites. Moreover, the electrochemical performance of prepared MoS₂@ZNC was evaluated by the generation of hydroxyl (•OH) and the degradation efficiency of phenol. The results showed that MoS₂@ZNC-2 had an excellent phenol degradation efficiency (98.8%) and COD removal efficiency (86.8%) within 120 min. Furthermore, MoS₂@ZNC cathode still maintained good performance after being experimented with 20 times, indicated the excellent stability of MoS₂@ZNC.