Facile co-synthesis and utilization of ultrafine and highly active PrBa0.8Ca0.2Co2O5+δ-Gd0.2Ce0.8O1.9 composite cathodes for solid oxide fuel cells

In situ self-assembled NdBa0.5Sr0.5Co2O5+δ/Gd0.1Ce0.9O2-δ hetero-interfaces enable enhanced electrochemical activity and CO2 durability for solid oxide fuel cells

The development of solid oxide fuel cells (SOFCs) faces impediments in terms of challenges associated with oxygen reduction activity and CO2 durability. Therefore, a series of novel composite cathode materials, consisting of NdBa0.5Sr0.5Co2O5+δ (NBSC) and Gd0.1Ce0.9O2-δ (GDC), were designed and synthesized using a one-pot strategy through a self-assembly process. The incorporation of GDC leads to a significant increase in the number of active sites. Furthermore, it alters the anisotropic transport properties of oxygen ions within layered double perovskite materials, consequently creating a three-dimensional conduit for O2- transportation. Simultaneously, the in-situ formation of closely intertwined heterogeneous interfaces between NBSC and GDC particles can facilitate the charge transfer processes and oxygen ion transport, thereby improving the kinetics of the oxygen reduction reaction (ORR). The NBSC-10GDC cathode, prepared through the one-pot method, exhibits reduced polarization resistances and enhanced CO2 tolerance in comparison to the mechanically mixed cathode. At 750 °C, the one-pot NBSC-10GDC exhibits a low area-specific resistance (ASR) of 0.029 Ω cm2, which is 69.8% lower than the ASR of single-phase NBSC and 42.0% lower than mechanically mixed NBSC-10GDC. Additionally, the one-pot NBSC-10GDC demonstrates a remarkable maximum power density (MPD) of 1.36 W cm-2 at 750 °C. These findings highlight the considerable potential of the one-pot NBSC-10GDC as a promising material for SOFC cathode.

Review of Recent Advances in Gas-Assisted Focused Ion Beam Time-of-Flight Secondary Ion Mass Spectrometry (FIB-TOF-SIMS)

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) is a powerful chemical characterization technique allowing for the distribution of all material components (including light and heavy elements and molecules) to be analyzed in 3D with nanoscale resolution. Furthermore, the sample's surface can be probed over a wide analytical area range (usually between 1 µm² and 10⁴ µm²) providing insights into local variations in sample composition, as well as giving a general overview of the sample's structure. Finally, as long as the sample's surface is flat and conductive, no additional sample preparation is needed prior to TOF-SIMS measurements. Despite many advantages, TOF-SIMS analysis can be challenging, especially in the case of weakly ionizing elements. Furthermore, mass interference, different component polarity of complex samples, and matrix effect are the main drawbacks of this technique. This implies a strong need for developing new methods, which could help improve TOF-SIMS signal quality and facilitate data interpretation. In this review, we primarily focus on gas-assisted TOF-SIMS, which has proven to have potential for overcoming most of the aforementioned difficulties. In particular, the recently proposed use of XeF₂ during sample bombardment with a Ga⁺ primary ion beam exhibits outstanding properties, which can lead to significant positive secondary ion yield enhancement, separation of mass interference, and inversion of secondary ion charge polarity from negative to positive. The implementation of the presented experimental protocols can be easily achieved by upgrading commonly used focused ion beam/scanning electron microscopes (FIB/SEM) with a high vacuum (HV)-compatible TOF-SIMS detector and a commercial gas injection system (GIS), making it an attractive solution for both academic centers and the industrial sectors.

Ultrafine, Dual-Phase, Cation-Deficient PrBa0.8Ca0.2Co2O5+δ Air Electrode for Efficient Solid Oxide Cells

Nanostructured air electrodes play a crucial role in improving the electrocatalytic activity of oxygen reduction and evolution reactions in solid oxide cells (SOCs). Herein, we report the fabrication of a nanostructured BaCoO₃-decorated cation-deficient PrBa_0.8Ca_0.2Co₂O_5+δ (PBCC) air electrode via a combined modification and direct assembly approach. The modification approach endows the dual-phase air electrode with a large surface area and abundant oxygen vacancies. An intimate air electrode-electrolyte interface is in situ constructed with the formation of a catalytically active Co₃O₄ bridging layer via electrochemical polarization. The corresponding single cell exhibits a peak power density of 2.08 W cm^-2, an electrolysis current density of 1.36 A cm^-2 at 1.3 V, and a good operating stability at 750 °C for 100 h. This study provides insights into the rational design and facile utilization of an active and stable nanostructured air electrode of SOCs.

A critical review on nano-structured electrodes of solid oxide cells

Renewable energies from solar and wind power are playing an ever increasing role in meeting the tremendous global energy demand with substantially reduced carbon emissions, however, their intermittent nature poses...

Layered Oxygen-Deficient Double Perovskites as Promising Cathode Materials for Solid Oxide Fuel Cells

Development of new functional materials with improved characteristics for solid oxide fuel cells (SOFCs) and solid oxide electrolysis cells (SOECs) is one of the most important tasks of modern materials science. High electrocatalytic activity in oxygen reduction reactions (ORR), chemical and thermomechanical compatibility with solid electrolytes, as well as stability at elevated temperatures are the most important requirements for cathode materials utilized in SOFCs. Layered oxygen-deficient double perovskites possess the complex of the above-mentioned properties, being one of the most promising cathode materials operating at intermediate temperatures. The present review summarizes the data available in the literature concerning crystal structure, thermal, electrotransport-related, and other functional properties (including electrochemical performance in ORR) of these materials. The main emphasis is placed on the state-of-art approaches to improving the functional characteristics of these complex oxides.