Double core-shell structure stabilized porous Si@graphene@TiO2 microsphere anode with excellent cyclability and high coulombic efficiency

Dual immobilization of porous Si by graphene supported anatase TiO2/carbon for high-performance and safe lithium storage

Smart surface coatings have been proven to be an effective strategy to significantly enhance the electronic conductivity and cycling stability of silicon-based anode materials. However, the single/conventional coatings face critical challenges, including low initial Coulomb efficiency (ICE), poor cyclability, and kinetics failure, etc. Hence, we proposed a dual immobilization strategy to synthesize graphene supported anatase TiO2/carbon-coated porous silicon composite (denoted as PSi@TiO2@C/Graphene) using industrial-grade ferrosilicon as lithium storage raw materials through the simple etching, combined with sol-gel and hydrothermal coating processes. In this work, the dual immobilization from the "confinement effect" of the inner TiO2 shell and the "synergistic effect" of the outer carbon shell, improves the kinetics of the electrochemical reaction and ensures the integrity of the electrode material structure during lithiation. Furthermore, the introduction of the graphene substrate offers ample space for dispersing and anchoring the Si-based granules, which in turn provides a stable 3D conductive network between the particles. As a result, the PSi@TiO2@C/Graphene electrode delivers high reversible capacity of 1605.4 mAh g-1 with 93.65% retention at 0.5 A g-1 after 100 cycles (vs. 4th discharge), high initial Coulomb efficiency (82.30%), and superior cyclability of 1159.9 mAh g-1 after 250 cycles. The above results suggest that the particle structure has great potential for applications in Si-based anode and may provide some inspiration for the design of other energy storage materials.

Activated carbon fibers functionalized with superhydrophilic coated pDA/TiO2/SiO2 with photoluminescent self-cleaning properties for efficient oil-water separation

The adhesion of high-viscosity oil contamination poses limitations on three-dimensional (3D) materials' practical use in treating oilfield-produced water (OPW). In this study, we developed a hybrid pDA/TiO2/SiO2 coating (PTS) on the surface of hydrophilic activated carbon (ACF1) through a combination of dopamine (DA) polymerization, ethyl orthosilicate (TEOS) hydrolysis, and the condensation of TiO2 nanoparticles (NPs) with SiO2 NPs. This coating was designed for gravity-based oil-water separation. The inherent porosity and generous pore size of ACF1-PTS conferred it an ultra-high permeation flux (pure water flux of 3.72 × 105 L∙m-2∙h-1), allowing it to effectively separate simulated oil-water mixtures and oil-water emulsions while maintaining exceptional permeation flux and oil rejection efficiency. When compared to cleaning methods involving ethanol aqueous solutions and NaClO, ultraviolet (UV) illumination cleaning proved superior, enabling oil-contaminated ACF1-PTS to exhibit remarkable flux recovery efficiency and oil-removal capabilities during cyclic separation of actual OPW. Furthermore, the ACF1-PTS material demonstrated impressive stability and durability when exposed to acidic environments (acid, alkali, and salt), robust hydraulic washout conditions, and 25-cycle tests. This study offers valuable insights and research avenues for the development of highly efficient and environmentally friendly 3D oil-water separation materials for the actual treatment of OPW.

Turning Complexity into Simplicity: In Situ Synthesis of High-Performance Si@C Anode in Battery Manufacturing Process by Partially Carbonizing the Slurry of Si Nanoparticles and Dual Polymers

For Si/C anodes, achieving excellent performance with a simple fabrication process is still an ongoing challenge. Herein, we report a green, facile and scalable approach for the in situ synthesis of Si@C anodes during the electrode manufacturing process by partially carbonizing Si nanoparticles (Si NPs) and dual polymers at a relatively low temperature. Due to the proper mass ratio of the two polymer precursors and proper carbonization temperature, the resultant Si-based anode demonstrates a typical Si@C core-shell structure and has strong mechanical properties with the aid of dual-interfacial bonding between the Si NPs core and carbon shell layer, as well as between the C matrix and the underlying Cu foil. Consequently, the resultant Si@C anode shows a high specific capacity (3458.1 mAh g-1 at 0.2 A g-1), good rate capability (1039 mAh g-1 at 4 A g-1) and excellent cyclability (77.94% of capacity retention at a high current density of 1 A g-1 after 200 cycles). More importantly, the synthesis of the Si@C anode is integrated in situ into the electrode manufacturing process and, thus, significantly decreases the cost of the lithium-ion battery but without sacrificing the electrochemical performance of the Si@C anode. Our results provide a new strategy for designing next-generation, high-capacity and cost-effective batteries.

Clarifying the effects of nanoscale porosity of silicon on the bandgap and alignment: a combined molecular dynamics-density functional tight binding computational study

Porous silicon (pSi) has been studied for its applications in solar cells, in particular in silicon-silicon tandem solar cells. It is commonly believed that porosity leads to an expansion of the bandgap due to nano-confinement. Direct confirmation of this proposition has been elusive, as experimental band edge quantification is subject to uncertainties and effects of impurities, while electronic structure calculations on relevant length scales are still outstanding. Passivation of pSi is another factor affecting the band structure. We present a combined force field-density functional tight binding study of the effects of porosity of silicon on its band structure. We thus perform electron structure-level calculations for the first time on length scales (several nm) that are relevant to real pSi, and consider multiple nanoscale geometries (pores, pillars, and craters) with key geometrical features and sizes of real porous Si. We consider the presence of a bulk-like base with a nanostructured top layer. We show that the bandgap expansion is not correlated with the pore size but with the size of the Si framework. Significant band expansion would require features of silicon (as opposed to pore sizes) to be as small as 1 nm, while the nanosizing of pores does not induce gap expansion. We observe a graded junction-like behavior of the band gap as a function of Si feature sizes as one moves from the bulk-like base to the nanoporous top layer.