Research progress of MXene-based catalysts for electrochemical water-splitting and metal-air batteries

The Single Atom Anchoring Strategy: Rational Design of MXene-Based Single-Atom Catalysts for Electrocatalysis

Single-atom catalysts (SACs) are a class of catalysts with low dosage, low cost, and the presence of metal atom-carrier interactions with high catalytic activity, which are considered to possess significant potential in the field of electrocatalysis. The most important aspect in the synthesis of SACs is the selection of suitable carriers. Metal carbides, nitrides, or carbon-nitrides (MXenes) are widely used as a new type of 2D materials with good electrical conductivity and tunable surface properties. The abundance of surface functional groups and vacancy defects on MXenes is an ideal anchoring site for metal single atoms and is therefore regarded as a good carrier for single-atom loading. In this work, the preparation method of MXenes, the loading mode of SACs, the characterization of the catalysts, and the electrochemical catalytic performance are described in detail, and some of the hot issues of the current research and future research directions are also summarized. The aim of this work is to promote the development of MXene-based SACs within the realm of electrocatalysis. With ongoing research and innovation, these materials are expected to be crucial in the future of energy conversion and storage solutions.

Ar/NH3 Plasma Etching of Cobalt-Nickel Selenide Microspheres Rich in Selenium Vacancies Wrapped with Nitrogen Doped Carbon Nanotubes as Highly Efficient Air Cathode Catalysts for Zinc-Air Batteries

This work utilizes defect engineering, heterostructure, pyridine N-doping, and carbon supporting to enhance cobalt-nickel selenide microspheres' performance in the oxygen electrode reaction. Specifically, microspheres mainly composed of CoNiSe2 and Co9Se8 heterojunction rich in selenium vacancies (VSe·) wrapped with nitrogen-doped carbon nanotubes (p-CoNiSe/NCNT@CC) are prepared by Ar/NH3 radio frequency plasma etching technique. The synthesized p-CoNiSe/NCNT@CC shows high oxygen reduction reaction (ORR) performance (half-wave potential (E1/2) = 0.878 V and limiting current density (JL) = 21.88 mA cm-2). The JL exceeds the 20 wt% Pt/C (19.34 mA cm-2) and the E1/2 is close to the 20 wt% Pt/C (0.881 V). It also possesses excellent oxygen evolution reaction (OER) performance (overpotential of 324 mV@10 mA cm-2), which even exceeds that of the commercial RuO2 (427 mV@10 mA cm-2). The density functional theory calculation indicates that the enhancement of ORR performance is attributed to the synergistic effect of plasma-induced VSe· and the CoNiSe2-Co9Se8 heterojunction. The p-CoNiSe/NCNT@CC electrode assembled Zinc-air batteries (ZABs) show a peak power density of 138.29 mW cm-2, outperforming the 20 wt% Pt/C+RuO2 (73.9 mW cm-2) and other recently reported catalysts. Furthermore, all-solid-state ZAB delivers a high peak power density of 64.83 mW cm-2 and ultra-robust cycling stability even under bending.

An Efficient Cathode Catalyst for Rechargeable Zinc-air Batteries based on the Derivatives of MXene@ZIFs

Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are crucial processes at the cathode of zinc-air batteries. Developing highly efficient and durable electrocatalysts at the air cathode is significant for the practical application of rechargeable zinc-air batteries. Herein, N-doped layered MX containing Co2P/Ni2P nanoparticles is synthesized by growing CoNi-ZIF on the surface and interlayers of the two-dimensional material MXene (Ti2C3) followed by phosphating calcination. The growth of CoNi-ZIF on the surface of MXene results in the attenuation of high-temperature structural damage of MXene, which in turn leads to the formation of Co2P/Ni2P@MX with a hierarchical configuration, higher electron conductivity, and abundant active sites. The optimized Co2P/Ni2P@MX achieves a half-wave potential of 0.85 V for the ORR and an overpotential of 345 mV for the OER. In addition, DFT calculations were adopted to investigate the mechanism at the atomic and molecular levels. The liquid zinc-air battery with Co2P/Ni2P@MX as the cathode exhibits a specific capacity of 783.7 mAh g-1 and exceeds 280 h (840 cycles) cycle stability, superior to zinc-air batteries constructed by the cathode of commercial Pt/C+RuO2 and other previous works. Furthermore, a solid-state battery synthesized with Co2P/Ni2P@MX as the cathode exhibits stable cycle performance (154 h/462 cycles).

MXenes for Zinc-Based Electrochemical Energy Storage Devices

As an economical and safer alternative to lithium, zinc (Zn) is promising for realizing new high-performance electrochemical energy storage devices, such as Zn-ion batteries, Zn-ion hybrid capacitors, and Zn-air batteries. Well-designed electrodes are needed to enable efficient Zn electrochemistry for energy storage. Two-dimensional transition metal carbides and nitrides (MXenes) are emerging materials with unique electrical, mechanical, and electrochemical properties and versatile surface chemistry. They are potential material candidates for constructing high-performance electrodes of Zn-based energy storage devices. This review first briefly introduces the working mechanisms of the three Zn-based energy storage devices. Then, the recent progress on the synthesis, chemical functionalization, and structural design of MXene-based electrodes is summarized. Their performance in Zn-based devices is analyzed to establish relations between material properties, electrode structures, and device performance. Last, several research topics are proposed to be addressed for developing practical MXene-based electrodes for Zn-based energy storage devices to enable their commercialization and broad adoption in the near future.

Promoting Electrocatalytic Oxygen Reactions Using Advanced Heterostructures for Rechargeable Zinc-Air Battery Applications

In order to facilitate electrochemical oxygen reactions in electrically rechargeable zinc-air batteries (ZABs), there is a need to develop innovative approaches for efficient oxygen electrocatalysts. Due to their reliability, high energy density, material abundance, and ecofriendliness, rechargeable ZABs hold promise as next-generation energy storage and conversion devices. However, the large-scale application of ZABs is currently hindered by the slow kinetics of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). However, the development of heterostructure-based electrocatalysts has the potential to surpass the limitations imposed by the intrinsic properties of a single material. This Account begins with an explanation of the configurations of ZABs and the fundamentals of the oxygen electrochemistry of the air electrode. Then, we summarize recent progress with respect to the variety of heterostructures that exploit bifunctional electrocatalytic reactions and overview their impact on ZAB performance. The range of heterointerfacial engineering strategies for improving the ORR/OER and ZAB performance includes tailoring the surface chemistry, dimensionality of catalysts, interfacial charge transfer, mass and charge transport, and morphology. We highlight the multicomponent design approaches that take these features into account to create advanced highly active bifunctional catalysts. Finally, we discuss the challenges and future perspectives on this important topic that aim to enhance the bifunctional activity and performance of zinc-air batteries.

Value addition of MXenes as photo-/electrocatalysts in water splitting for sustainable hydrogen production

The energy transition from fossil fuel-based to renewable energy is a global agenda. At present, a major concern in the green hydrogen economy is the demand for clean fuels and non-noble materials to produce hydrogen through water splitting. Researchers are focusing on addressing this concern with the help of the development of appropriate non-noble-based photo-/electrocatalytic materials. A new class of two-dimensional materials, MXenes, have recently shown tremendous potential for water splitting to produce H2via a photoelectrochemical process. The unique properties of emerging 2D MXene materials, such as hydrophilic surface functionalities, higher surface-to-volume ratios, and inherent flexibility, present these materials as appropriate photo-/electrocatalytic materials. Unique value addition and innovative strategies such as the introduction of end-group modification, heterojunctions, and nanostructure engineering have shown the potential of MXene materials as emerging photo-/electrocatalysts for water splitting. When integrated with conventional noble metal catalysts, MXene-based catalysts demonstrated a lower overpotential for hydrogen and oxygen evolution reactions and a remarkable boost in performance for enhanced H2 production rates surpassing those of pristine noble metal-based catalysts. These promote future perspectives for the utilization of chemically synthesized MXenes as alternative photo-/electrocatalysts. Future research direction should focus on MXene synthesis and utilization for surface modification, composite formation, stabilization, and optimization in synthesis methods and post-synthesis treatments. This review highlights the progress in the understanding of fundamental mechanisms and issues associated with water splitting, influencing factors of MXenes, their value addition role, and application strategies for water splitting, including performance, challenges, and outlook of MXene-based photo-/electrocatalysts, in the last five years.

Precisely Constructing Orbital-Coupled Fe─Co Dual-atom Sites for High-Energy-Efficiency Zn-Air/Iodide Hybrid Batteries

Rechargeable Zn-air batteries (ZABs) are promising for energy storage and conversion. However, the high charging voltage and low energy efficiency hinder their commercialization. Herein, these challenges are addressed by employing precisely constructed multifunctional Fe-Co diatomic site catalysts (FeCo-DACs) and integrating iodide/iodate redox into ZABs to create Zinc-air/iodide hybrid batteries (ZAIHBs) with highly efficient multifunctional catalyst. The strong coupling between the 3d orbitals of Fe and Co weakens the excessively strong binding strength between active sites and intermediates, enhancing the catalytic activities for oxygen reduction/evolution reaction and iodide/iodate redox. Consequently, FeCo-DACs exhibit outstanding bifunctional oxygen catalytic activity with a small potential gap (ΔE = 0.66 V) and outstanding stability. Moreover, an outstanding catalytic performance toward iodide/iodate redox is obtained. Therefore, FeCo-DAC-based ZAIHBs exhibit high energy efficiency of up to 75% at 10 mA cm-2 and excellent cycling stability (72% after 500 h). This research offers critical insights into the rational design of DACs and paves the way for high-energy efficiency energy storage devices.

Tailoring Alkalized and Oxidized V2CTx as Anode Materials for High-Performance Lithium Ion Batteries

V2CTx MXenes have gained considerable attention in lithium ion batteries (LIBs) owing to their special two-dimensional (2D) construction with large lithium storage capability. However, engineering high-capacity V2CTx MXenes is still a great challenge due to the limited interlayer space and poor surface terminations. In view of this, alkalized and oxidized V2CTx MXenes (OA-V2C) are envisaged. SEM characterization confirms the accordion-like layered morphology of OA-V2C. The XPS technique illustrates that undergoing alkalized and oxidized treatment, V2CTX MXene replaces -F and -OH with -O groups, which are more conducive to pseudocapacitive properties as well as Na ion diffusion, providing more active sites for ion storage in OA-V2C. Accordingly, the electrochemical performance of OA-V2C as anode materials for LIBs is evaluated in this work, showing excellent performance with high reversible capacity (601 mAh g-1 at 0.2 A g-1 over 500 cycles), competitive rate performance (222.2 mAh g-1 and 152.8 mAh g-1 at 2 A g-1 and 5 A g-1), as well as durable long-term cycling property (252 mAh g-1 at 5 A g-1 undergoing 5000 cycles). It is noted that the intercalation of Na+ ions and oxidation co-modification greatly reduces F surface termination and concurrently increases interlayer spacing in OA-V2C, significantly expediting ion/electron transportation and providing an efficient way to maximize the performance of MXenes in LIBs. This innovative refinement methodology paves the way for building high-performance V2CTx MXenes anode materials in LIBs.

2D Monolayer Catalysts: Towards Efficient Water Splitting and Green Hydrogen Production

A viable alternative to non-renewable hydrocarbon fuels is hydrogen gas, created using a safe, environmentally friendly process like water splitting. An important role in water-splitting applications is played by the development of two-dimensional (2D) layered transition metal chalcogenides (TMDCs), transition metal carbides (MXenes), graphene-derived 2D layered nanomaterials, phosphorene, and hexagonal boron nitride. Advanced synthesis methods and characterization instruments enabled an effective application for improved electrocatalytic water splitting and sustainable hydrogen production. Enhancing active sites, modifying the phase and electronic structure, adding conductive elements like transition metals, forming heterostructures, altering the defect state, etc., can improve the catalytic activity of 2D stacked hybrid monolayer nanomaterials. The majority of global research and development is focused on finding safer substitutes for petrochemical fuels, and this review summarizes recent advancements in the field of 2D monolayer nanomaterials in water splitting for industrial-scale green hydrogen production and fuel cell applications.

Treatment of carbon electrodes with Ti3C2Tx MXene coating and thermal method for vanadium redox flow batteries: a comparative study

One of the significant challenges of vanadium redox flow batteries is connected to the negative electrode where the main reaction of V(ii)/V(iii) and the side reaction of hydrogen evolution compete. To address this issue, we used titanium carbide (Ti3C2Tx) MXene coating via drop-casting to introduce oxygen functional groups and metals on the carbon electrode surface. Characterization through scanning electron microscopy and X-ray photoelectron spectroscopy confirmed the even distribution of Ti3C2Tx MXene on the electrodes and the presence of titanium and termination groups (-O, -Cl, and -F). The cyclic voltammetry analysis of MXene-coated electrodes showed more sharp electrochemical peaks for the V(ii)/V(iii) reaction than thermal-treated electrodes, even at relatively high scan rates. Notably, a relatively high reaction rate of 5.61 × 10-4 cm s-1 was achieved for the V(ii)/V(iii) reaction on MXene-coated electrodes, which shows the competitiveness of the method compared to thermal treatment (4.17 × 10-4 cm s-1). The flow battery tests, at a current density of 130 mA cm-2, using MXene-coated electrodes showed pretty stable discharge capacity for over 100 cycles. In addition, the voltage and energy efficiency were significantly higher than those of the system using untreated electrodes. Overall, this work highlights the potential application of MXene coating in carbon electrode treatment for vanadium redox flow batteries due to remarkable electrocatalytic activity and battery performance, providing a competitive method for thermal treatment.

Bioinspired 2D nanofluidic membranes for energy applications

Bioinspired two-dimensional (2D) nanofluidic membranes have been explored for the creation of high-performance ion transport systems that can mimic the delicate transport functions of living organisms. Advanced energy devices made from these membranes show excellent energy storage and conversion capabilities. Further research and development in this area are essential to unlock the full potential of energy devices and facilitate the development of high-performance equipment toward real-world applications and a sustainable future. However, there has been minimal review and summarization of 2D nanofluidic membranes in recent years. Thus, it is necessary to carry out an extensive review to provide a survey library for researchers in related fields. In this review, the classification and the raw materials that are used to construct 2D nanofluidic membranes are first presented. Second, the top-down and bottom-up methods for constructing 2D membranes are introduced. Next, the applications of bioinspired 2D membranes in osmotic energy, hydraulic energy, mechanical energy, photoelectric conversion, lithium batteries, and flow batteries are discussed in detail. Finally, the opportunities and challenges that 2D nanofluidic membranes are likely to face in the future are envisioned. This review aims to provide a broad knowledge base for constructing high-performance bioinspired 2D nanofluidic membranes for advanced energy applications.

Enhanced TiO2/SiCx Active Layer Formed In Situ on Coal Gangue/Ti3C2 MXene Electrocatalyst as Catalytic Integrated Units for Efficient Li-O2 Batteries

The pursuit of efficient cathode catalysts to improve cycle stability at ultra-high rates plays an important role in boosting the practical utilization of Li-O2 batteries. Featured as industrial solid waste, coal gangue with rich electrochemical active components could be a promising candidate for electrocatalysts. Here, a coal gangue/Ti3C2 MXene hybrid with a TiO2/SiCx active layer is synthesized and applied as a cathode catalyst in Li-O2 batteries. The coal gangue/Ti3C2 MXene hybrid has a tailored amorphous/crystalline heterostructure, enhanced active TiO2 termination, and a stable SiCx protective layer; thereby, it achieved an excellent rate stability. The Li-O2 battery, assembled with a coal gangue/Ti3C2 MXene cathode catalyst, was found to obtain a competitive full discharge capacity of 3959 mAh g-1 and a considerable long-term endurance of 180 h (up to 175 cycles), with a stable voltage polarization of 1.72 V at 2500 mA g-1. Comprehensive characterization measurements (SEM, TEM, XPS, etc.) were applied; an in-depth analysis was conducted to reveal the critical role of TiO2/SiCX active units in regulating the micro-chemical constitution and the enhanced synergistic effect between coal gangue and Ti3C2 MXene. This work could provide considerable insights into the rational design of catalysts derived from solid waste gangue for high-rate Li-O2 batteries.

High-Voltage MXene-Based Supercapacitors: Present Status and Future Perspectives

As an emerging class of 2D materials, MXene exhibits broad prospects in the field of supercapacitors (SCs). However, the working voltage of MXene-based SCs is relatively limited (typically ≤ 0.6 V) due to the oxidation of MXene electrode and the decomposition of electrolyte, ultimately leading to low energy density of the device. To solve this issue, high-voltage MXene-based electrodes and corresponding matchable electrolytes are developed urgently to extend the voltage window of MXene-based SCs. Herein, a comprehensive overview and systematic discussion regarding the effects of electrolytes (aqueous, organic, and ionic liquid electrolytes), asymmetric device configuration, and material modification on the operating voltage of MXene-based SCs, is presented. A deep dive is taken into the latest advances in electrolyte design, structure regulation, and high-voltage mechanism of MXene-based SCs. Last, the future perspectives on high-voltage MXene-based SCs and their possible development directions are outlined and discussed in depth, providing new insights for the rational design and realization of advanced next-generation MXene-based electrodes and high-voltage electrolytes.

Rational Fabrication of Defect-Rich and Hierarchically Porous Fe-N-C Nanosheets as Highly Efficient Oxygen Reduction Electrocatalysts for Zinc-Air Battery

The rational design of morphology and structure for oxygen reduction reaction (ORR) catalysts still remains a critical challenge. Herein, we successfully construct defect-rich and hierarchically porous Fe-N-C nanosheets (Fe-N-CNSs), by taking advantage of metal-organic complexation and a mesoporous template. Benefiting from the advantages of high density of active sites, fast mass transfer channels, and sufficient reaction area, the optimal Fe-N-CNSs demonstrate satisfactory ORR activity with an excellent half-wave potential of up to 0.87 V, desirable durability, and robust methanol tolerance. Noteworthy, the Fe-N-CNSs based zinc-air battery shows significant performance with a peak power density of 128.20 mW cm^-2 and open circuit voltage of 1.53 V, which reveals that the Fe-N-CNSs catalysts present promising practical application prospects. Therefore, we believe that this research will provide guidance for the optimization of Fe-N-C materials.

Recent Advances of Modified Ni (Co, Fe)-Based LDH 2D Materials for Water Splitting

Water splitting technology is an efficient approach to produce hydrogen (H₂) as an energy carrier, which can address the problems of environmental deterioration and energy shortage well, as well as establishment of a clean and sustainable hydrogen economy powered by renewable energy sources due to the green reaction of H₂ with O₂. The efficiency of H₂ production by water splitting technology is intimately related with the reactions on the electrode. Nowadays, the efficient electrocatalysts in water splitting reactions are the precious metal-based materials, i.e., Pt/C, RuO₂, and IrO₂. Ni (Co, Fe)-based layered double hydroxides (LDH) two-dimensional (2D) materials are the typical non-precious metal-based materials in water splitting with their advantages including low cost, excellent electrocatalytic performance, and simple preparation methods. They exhibit great potential for the substitution of precious metal-based materials. This review summarizes the recent progress of Ni (Co, Fe)-based LDH 2D materials for water splitting, and mainly focuses on discussing and analyzing the different strategies for modifying LDH materials towards high electrocatalytic performance. We also discuss recent achievements, including their electronic structure, electrocatalytic performance, catalytic center, preparation process, and catalytic mechanism. Furthermore, the characterization progress in revealing the electronic structure and catalytic mechanism of LDH is highlighted in this review. Finally, we put forward some future perspectives relating to design and explore advanced LDH catalysts in water splitting.

Cobalt vanadium chalcogenide microspheres decorated with dendrite-like fiber nanostructures for flexible wire-typed energy conversion and storage microdevices

The increasing energy demand for next-generation portable and miniaturized electronics has drawn tremendous attention to develop microscale energy storage and conversion devices with light weight and flexible characteristics. Herein, we report the preparation of flower-like cobalt vanadium selenide/nickel copper selenide (CoVSe/NiCuSe) microspheres with three-dimensional hierarchical structure of micropore growth on copper wire for a flexible fiber microsupercapacitor (microSC) and overall water splitting. The CoV-LDH microspheres are anchored on the dendrite-like NiCu nanostructured Cu wire using a hydrothermal method (CoV-LDH/NiCu@CW). The sulfidation and selenization of CoV-LDH/NiCu was carried out through the ion-exchange reaction of OH^- with sulfide and selenide ions to obtain CoVS/NiCuS@CW and CoVSe/NiCuSe@CW electrodes, respectively. Benefitting from the unique structure, the flower-like CoVSe/NiCuSe@CW microspheres exhibit better electrochemical performance compared with other as-prepared fiber-shaped electrodes. As an electrode active material for microSC, CoVSe/NiCuSe microspheres exhibit a specific capacitance of 35.40 F cm^-3 at 4 mA cm^-2, and maintain 281.25 F cm^-3 even at a high current density of 83 mA cm^-2, indicating outstanding charge storage capacitance and excellent rate capability. Moreover, the assembled flexible solid-state asymmetric microSCs based on flower-like CoVSe/NiCuSe microspheres-coated Cu wire as the positive electrode and polypyrrole/reduced graphene oxide-coated carbon fiber as the negative electrode manifests a maximum energy density of 20.17 mW h cm^-3 at a power density of 624.32 mW cm^-3 and remarkable cycling stability (96.7% after 5000 cycles) with good mechanical stability. As an electrocatalyst for oxygen and hydrogen evolution reactions in alkaline medium, the CoVSe/NiCuSe electrode delivers an overpotential of 297 mV and 165 mV at 100 mA cm^-2. Furthermore, the CoVSe/NiCuSe-based electrolysis cell for overall water splitting presents a low cell voltage (1.7 V at 50 mA cm^-2) as well as high durability.

Ru/Rh Cation Doping and Oxygen-Vacancy Engineering of FeOOH Nanoarrays@Ti3 C2 Tx MXene Heterojunction for Highly Efficient and Stable Electrocatalytic Oxygen Evolution

Oxyhydroxides hold promise as highly-efficient non-noble electrocatalysts for the oxygen evolution reaction (OER), but their poor conductivity and structural instability greatly impede their progress. Herein, the authors develop a cation-doping and oxygenvacancy engineering strategy to fabricate Ru/Rh-doped FeOOH nanoarrays with abundant oxygen-vacancies in situ grown on Ti₃ C₂ T_x MXene (Ru/Rh-FeOOH@Ti₃ C₂ T_x ) as highly-efficient OER electrocatalysts. Benefiting from Ru/Rh-cation regulation, oxygenvacancy engineering, and heterojunction synergy between MXene and modulated FeOOH, the optimized Rh/Ru-FeOOH@Ti₃ C₂ T_x electrocatalysts exhibit excellent OER activities and remarkable stabilities with 100 h. Particularly, 3%Rh-FeOOH@Ti₃ C₂ T_x electrocatalyst only needs a 223 mV overpotential at 10 mA cm^-2 and 306 mV to reach 100 mA cm^-2 , which is superior to commercial IrO₂ catalyst and most reported oxyhydroxide-based electrocatalysts. Further, systematically theoretical caculation, kinetics, thermodynamics, and microstructural analysis verify that the integration of Ru/Rh-cation doping and oxygen vacancy obviously enhances the intrinsic conductivity and lattice defects of FeOOH and expose more active sites, thereby decreasing the adsorption/desorption energy barrier and activation energy, and improving the specific activity and catalytic kinetics of electrocatalysts, whereas in situ hybridization with MXene strengthens the structural stability. This work clearly confirms that cationdoping and oxygen-vacancy engineering offers a joint strategy for the electronic structure modulation and design of highly-efficient inexpensive OER electrocatalysts.

Construction of MnxCoyO4/Ti electrocatalysts for efficient bifunctional water splitting

In this work, we report the design and synthesis of non-noble metal-based electrocatalysts for effective overall water splitting in alkaline solutions for the development of hydrogen energy. The electrocatalysts were synthesized by a one-step hydrothermal method similar to microflower structure electrocatalysts. The synergistic effect between the special Echinops sphaerocephalus nanostructure and the nanowire can greatly improve the conductivity of the nanomaterial due to its high activity quality, fast ion transport, and exposure of more active sites, thus resulting in a better catalytic activity and a longer material stability of the electrocatalyst. For Mn_xCo_yO₄/Ti in alkaline aqueous solutions, a current density of 10 mA cm^-2 is required when the voltage is only 1.60 V. In addition, the hydrogen evolution activity of electrocatalysts is 168 mV at 10 mA cm^-2, the Tafel slope is 174 mV dec^-1, and the oxygen evolution activity of electrocatalysts is 229 mV at 10 mA cm^-2, which showed good long-term stability within 12 h, even better than that of previously reported electrocatalysts.

The SnO2/MXene Composite Ethanol Sensor Based on MEMS Platform

In recent years, two-dimensional layered material MXene has attracted extensive attention in the fields of sensors due to its large specific surface area and rich active sites. So, we employed multilayer Ti3C2TX and SnO2 microspheres to prepare SnO2/MXene composites for enhancing gas-sensing properties of pristine SnO2. The composite was brushed on a microelectromechanical system (MEMS) platform to make resistance-type gas sensors with low power consumption. The gas-sensing results show that the SnO2/MXene sensor with the best composite ratio (SnO2: MXene mass ratio is 5:1, named SM-5) greatly improves gas sensitivity of SnO2 sensor, among which the sensitivity to ethanol gas is the highest. At the same time, the composite also speeds up the response recovery speed of the sensor. When the SM-5 sensor worked at its optimal temperature 230 °C, its response value to 10 ppm ethanol reaches 5.0, which is twice that of the pristine SnO2 sensor. Its response and recovery time are only 14 s and 26 s, respectively. The sensing mechanism of the composite is discussed according to the classical the space charge or depletion layer model. It is concluded that the Schottky barrier of composites and the metal properties of Ti3C2Tx are responsible for improvement of the gas-sensing properties of the composite.