The influence of resource strategies on childhood phthalate exposure--the role of REACH in a zero waste society

Fingerprinting risk from recycled plastic products using physical and chemical properties

The increasing production and use of recycled plastics have raised significant concerns regarding the risks associated with hazardous chemicals. The recycled plastics can accumulate potentially hazardous chemicals, many of which are unknown and unregulated. This study compared the physical and chemical characteristics of recycled plastic products intended for food, oral, or skin contact applications with similar virgin plastic products. The results revealed significant changes in the surface morphology and elevated concentration of organic and inorganic chemicals in the recycled plastics compared to the virgin plastics. Specifically, metal(loids) concentrations were over 10 times higher, PFAS levels were twice as high, and PAH levels were three times higher in the recycled plastics. The calculated Hazard Index (HI) indicates up to a twofold increase in recycled plastics for both adults and children compared to virgin plastics, specifically through microplastic ingestion. The HI values exceed 1 for recycled plastic ingestion, therefore it falls in high-risk category due to the associated chemical exposure from microplastics.

Temporal and spatial variations of urinary phthalate metabolites for adults in China (2005-2020): A synthesis of biomonitoring data

Chinese people are experiencing phthalate exposure risks. However, temporal and regional phthalate internal exposure variations amongst Chinese have not been established. To address this gap, we integrated our 69 adult participants' bio-monitored urinary phthalate metabolite (UPM) concentration data by high-performance liquid chromatography with mass spectrometry in Xi'an and Nanjing and the data from 35 literature (total sample size: 18768). Then, we analyzed China's temporal and spatial variations of adult UPM levels from 2005 to 2020 based on multi statistical methods. The results showed that the sum of eight UPM concentrations (i.e., monomethyl phthalate (MMP), mono-ethyl phthalate (MEP), mono-n-butyl phthalate (MNBP), mono-2-isobutyl phthalate, mono-benzyl phthalate, and three metabolites from di-2-ethylhexyl phthalate (DEHPM3)) had slightly increased in 2013-2020 (median: 230 (5th-95th: 73.7-653) ng/mL) compared with the period 2005-2012, which were about two times higher than the levels in most EU countries. The MNBP concentration between 2013 and 2020 (120 ng/mL, shared 52% of the eight UPM concentrations) has significantly increased to over two times the level between 2005 and 2012, followed by the DEHPM3 with a similar trend. Conversely, MEP and MMP concentrations in the later period decreased from the former period. In China, adults had the highest UPM concentrations in the East and the lowest in the Middle. The adults in the East, the North, the South, and the Northeast had higher adverse phthalate exposure risks than the adults in the West and the Middle, and the Hazard index (HI) values were the highest in the East (1.61 (5th-95th: 1.01-3.07)). The adult exposure risks in the West had large heterogeneities (HIs: 0.46 (0.11-2.37). Regional variations in climate, the economy, industrial technology, and living styles could cause phthalate exposure differences. China needs to enhance tight regulation and enforcement of di-n-butyl phthalate (DNBP) (the parent of MNBP) and DEHP to protect public health.

Photochemical Oxidation of Polyethylene Terephthalate Microplastics Adsorbed on Sand and Silica Surfaces

The environmental contamination by plastics, microplastics, and related compounds is a major concern. While the detection and release of micro- and nanoparticles from these materials have been widely studied, the formation and release of molecules resulting from their degradation in the environment have been overlooked. This work presents a study of the products released from poly(ethylene terephthalate) (PET) irradiated as pure particles and adsorbed on silica and sand surfaces under different irradiation conditions. The role of oxygen was also evaluated. The products were identified by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-high resolution mass spectrometry (LC-HRMS). The main released molecules can be accounted for by considering the cleavage of α- and β-bonds next to the ester moiety of the polymer chain. Volatile products such as benzene as well as monomer units of the polymer and related products were identified. In the presence of oxygen, acetic acid and products resulting from hydroxylation at the benzenic ring or at the ethyl moiety were detected. Adsorption on silica and sand has little effect on the photoproduct distributions. The irradiation at 360 nm leads to distributions similar to the ones observed at 257 nm, but the reaction rate is lower. The identified product ethylene terephthalate is a marker of PET plastics and particles and can therefore be used to evaluate the environmental contamination by this polymer material.

Endocrine modulating chemicals in food packaging: A review of phthalates and bisphenols

Phthalates and bisphenol chemicals have been widely used globally in packaging materials and consumer products for several decades. These highly functional chemicals have become a concern due to their toxicity (i.e., endocrine/hormone modulators) and ability to migrate from food contact materials (FCMs) into food matrices and the environment resulting in human and environmental health risks. FCMs, composed of postconsumer materials, are particularly high risk for containing these compounds. The evaluation of postconsumer recycled feedstocks in FCMs is compulsory and selection of an appropriate detection method to comply with applicable regulations is necessary to evaluate human and environmental safety. Numerous regulations have been proposed and passed globally for both compound classes that are recognized as priority pollutants by the United States Environmental Protection Agency and the European Union. Several brand owners and retailers have also released their own "restricted substance lists" due to the mounting consumer and regulatory concerns. This review article has two goals: (1) discuss the utilization, toxicology, human exposure routes, and occurrence levels of phthalates and bisphenols in FCMs and associated legislation in various countries and (2) discuss critical understanding and updates for detection/quantification techniques. Current techniques discussed include extraction and sample preparation methods (solid-phase microextraction [SPME], headspace SPME, Soxhlet procedure, ultrasound-assisted extraction), chromatographic techniques (gas, liquid, detectors), and environmental/blank considerations for quantification. This review complements a previous review of phthalates in foods from 2009 by discussing phthalate and bisphenol characteristics, analytical methods of determining concentrations in packaging materials, and their influence on the migration potential into food.

Plastic waste reprocessing for circular economy: A systematic scoping review of risks to occupational and public health from legacy substances and extrusion

The global plastics reprocessing sector is likely expand as the circular economy becomes more established and efforts to curb plastic pollution increase. Via a critical systematic scoping review (PRISMA-ScR), we focused on two critical challenges for occupational and public health that will require consideration along with this expansion: (1) Legacy contamination in secondary plastics, addressing the risk of materials and substances being inherited from the previous use and carried (circulated or transferred) through into new products when reprocessed material enters its subsequent use phase (recycled, secondary plastic); and, (2) Extrusion of secondary plastics during the final stage of conventional mechanical reprocessing. Based on selected literature, we semi-quantitatively assessed nine risk scenarios and ranked them according to the comparative magnitude of risk to human health. Our analysis highlights that despite stringent regulation, industrial diligence and enforcement, occasionally small amounts of potentially hazardous substances contained in waste plastics are able to pass through established safeguards and re-enter (cascade into) the next use phase (product cycle) after being recycled. Although many of these 'inherited' chemical substances are present at concentrations unlikely to pose a serious and imminent threat, their existence may indicate a wider or possible increase in pollution dispersion. Our assessment indicates that the highest risk results from exposure to these substances during extrusion by mechanical reprocessors in contexts where only passive ventilation, dilution and dispersion are used as control measures. Our work sets the basis to inform improved future risk management protocols for a non-polluting circular economy for plastics.

Safety of recycled plastics and textiles: Review on the detection, identification and safety assessment of contaminants

In 2019, 368 mln tonnes of plastics were produced worldwide. Likewise, the textiles and apparel industry, with an annual revenue of 1.3 trillion USD in 2016, is one of the largest fast-growing industries. Sustainable use of resources forces the development of new plastic and textile recycling methods and implementation of the circular economy (reduce, reuse and recycle) concept. However, circular use of plastics and textiles could lead to the accumulation of a variety of contaminants in the recycled product. This paper first reviewed the origin and nature of potential hazards that arise from recycling processes of plastics and textiles. Next, we reviewed current analytical methods and safety assessment frameworks that could be adapted to detect and identify these contaminants. Various contaminants can end up in recycled plastic. Phthalates are formed during waste collection while flame retardants and heavy metals are introduced during the recycling process. Contaminants linked to textile recycling include; detergents, resistant coatings, flame retardants, plastics coatings, antibacterial and anti-mould agents, pesticides, dyes, volatile organic compounds and nanomaterials. However, information is limited and further research is required. Various techniques are available that have detected various compounds, However, standards have to be developed in order to identify these compounds. Furthermore, the techniques mentioned in this review cover a wide range of organic chemicals, but studies covering potential inorganic contamination in recycled materials are still missing. Finally, approaches like TTC and CoMSAS for risk assessment should be used for recycled plastic and textile materials.

Enhanced in vitro toxicity of plastic leachates after UV irradiation

Plastics can release numerous chemicals and thereby, contribute to the chemical pollution in aquatic systems. To which extent environmental degradation processes influence the release of plastic chemicals, is currently unknown and subject of research. We therefore evaluated aqueous leachates of 12 differently formulated plastics (e.g., pre-production, post-industrial and recycled pellets as well as final products) using in vitro bioassays and chemical analysis via LC-HRMS nontarget approach. We weathered these plastics by UV irradiation (UV-C and UV-A/B) under laboratory conditions in dryness and a subsequent leaching period in ultrapure water ('atmospheric' weathering) or directly in water ('aquatic' weathering, UV-A/B_aq). A dark control (DC) without UV light served as a reference treatment. Some plastics triggered several toxicological endpoints (low-density polyethylene recyclate (LDPE-R), starch blend (SB), bio-based polybutylene succinate (Bio-PBS) and polyvinyl chloride (PVC)), whereas others caused little to no effects (polyethylene terephthalate (PET), polystyrene (PS), polypropylene (PP) and LDPE). UV irradiation enhanced the plastics' toxicity, even for samples initially evaluated as toxicologically inconspicuous. The plastic samples caused oxidative stress (85%), baseline toxicity (42%), antiestrogenicity (40%) and antiandrogenicity (27%). Positive findings were measured after UV-C (63%) and UV-A/B_aq (50%) treatments, followed by UV-A/B (48%) and DC (33%). Overall, we detected between 42 (DC) and 2896 (UV-A/B_aq) chemical compounds. Our study demonstrates that differently formulated plastics leach toxic chemicals. UV exacerbates the plastics' toxicity by either generating active compounds and/or by facilitating their release. UV light even leads to the release of bioactive compounds from plastics of low chemical complexity. To prevent the exposure to plastic-associated chemicals, the application of chemicals could be reduced to a minimum, while on a regulatory level the evaluation of plastic eluates could be another focal point next to singular compounds.

Bibliographic mapping of post-consumer plastic waste based on hierarchical circular principles across the system perspective

The current dominating production and consumption model is based on the linear economy (LE) model, within which raw materials are extracted-processed-consumed-discarded. A circular economy (CE) constitutes a regenerative systemic approach to economic development which views waste as a valuable resource to be reprocessed back into the economy. In order to understand the circular strategy for a systemic change from an LE to a CE as a means of resolving the issue of plastic waste, this research aims to map current circular strategy trends across the system perspective contained in the literature relating to plastic CE literature. The novelty of the research lies in the mapping and review of the distribution of comprehensive circular strategies within the 9R framework across the entire system perspective (e.g. micro-meso-macro) down to its sub-levels in the literature on a plastic CE. The bibliographic mapping and systematic literature review iindicateed that the majority of the research focused on recycle (R8), followed by refuse (R0), reuse (R3), and reduce (R2). Certain circular strategies are more appropriate to handling certain plastic materials, despite CE's favoring of prevention and recycling over incineration. Recover (R9) is often used to process mixed and contaminated plastic. Recycling (R8) is the most popular circular strategy and the most applicable to plastic material with three recycle trends, namely; mechanical recycling, chemical recycling and DRAM (Distributed-Recycling-and-Additive-Manufacturing). Prolonging the product life through refurbishing (R5) is not applicable to plastic due to its material limitations. Reduce (R2) popularity as circular strategy reflects the preference to reduce consumption, either by launching campaigns to prevent waste or increasing production efficiency. Research on Rethink (R1) has largely focused on rethinking product design, consumer and organization behavior and perceptions of CE. Refuse (R0) strategy is an adoption of bio-based plastics which have a similar function to fossil-based plastics.

Pollutants delivered every day: Phthalates in plastic express packaging bags and their leaching potential

The rapid development of the express industry brings not only convenience but also environmental problems such as plastic wastes. In this study, we collected plastic express packaging bags from major express companies in China to investigate phthalates in them. Infrared spectra indicated that all these samples were made from polyethylene but with different carbonyl index (CI) values. Total phthalates (∑Phthalates) concentrations in these samples ranged from 11.16 to 309.70 μg g^-1. Di(2-ethylhexyl) phthalate, di-n-butyl phthalate, and di-isobutyl phthalate were predominant phthalates. The leaching amounts of ∑Phthalates after 48 h ranged from 181.44 to 5320.64 ng g^-1. The leaching amounts of ∑Phthalates significantly positively related to ∑Phthalates concentrations of samples, while the leaching ratios presented opposite trends. Concentrations and leaching amounts of ∑Phthalates and major phthalates were significantly higher in samples from high CI value company group than those from low CI value company group. The results of our study indicate that plastic express packaging bags could be a critical source of phthalates. The involving of recycled plastics during the manufacture of plastic express packaging bags may influence the content and composition of phthalates in them and also increase the releasing risk of phthalates.

An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling

Over the last 60 years plastics production has increased manifold, owing to their inexpensive, multipurpose, durable and lightweight nature. These characteristics have raised the demand for plastic materials that will continue to grow over the coming years. However, with increased plastic materials production, comes increased plastic material wastage creating a number of challenges, as well as opportunities to the waste management industry. The present overview highlights the waste management and pollution challenges, emphasising on the various chemical substances (known as "additives") contained in all plastic products for enhancing polymer properties and prolonging their life. Despite how useful these additives are in the functionality of polymer products, their potential to contaminate soil, air, water and food is widely documented in literature and described herein. These additives can potentially migrate and undesirably lead to human exposure via e.g. food contact materials, such as packaging. They can, also, be released from plastics during the various recycling and recovery processes and from the products produced from recyclates. Thus, sound recycling has to be performed in such a way as to ensure that emission of substances of high concern and contamination of recycled products is avoided, ensuring environmental and human health protection, at all times.

Material Cycles and Chemicals: Dynamic Material Flow Analysis of Contaminants in Paper Recycling

This study provides a systematic approach for assessment of contaminants in materials for recycling. Paper recycling is used as an illustrative example. Three selected chemicals, bisphenol A (BPA), diethylhexyl phthalate (DEHP) and mineral oil hydrocarbons (MOHs), are evaluated within the paper cycle. The approach combines static material flow analysis (MFA) with dynamic material and substance flow modeling. The results indicate that phasing out of chemicals is the most effective measure for reducing chemical contamination. However, this scenario was also associated with a considerable lag phase (between approximately one and three decades) before the presence of chemicals in paper products could be considered insignificant. While improved decontamination may appear to be an effective way of minimizing chemicals in products, this may also result in lower production yields. Optimized waste material source-segregation and collection was the least effective strategy for reducing chemical contamination, if the overall recycling rates should be maintained at the current level (approximately 70% for Europe). The study provides a consistent approach for evaluating contaminant levels in material cycles. The results clearly indicate that mass-based recycling targets are not sufficient to ensure high quality material recycling.

Recycling of plastic waste: Presence of phthalates in plastics from households and industry

Plastics recycling has the potential to substitute virgin plastics partially as a source of raw materials in plastic product manufacturing. Plastic as a material may contain a variety of chemicals, some potentially hazardous. Phthalates, for instance, are a group of chemicals produced in large volumes and are commonly used as plasticisers in plastics manufacturing. Potential impacts on human health require restricted use in selected applications and a need for the closer monitoring of potential sources of human exposure. Although the presence of phthalates in a variety of plastics has been recognised, the influence of plastic recycling on phthalate content has been hypothesised but not well documented. In the present work we analysed selected phthalates (DMP, DEP, DPP, DiBP, DBP, BBzP, DEHP, DCHP and DnOP) in samples of waste plastics as well as recycled and virgin plastics. DBP, DiBP and DEHP had the highest frequency of detection in the samples analysed, with 360μg/g, 460μg/g and 2700μg/g as the maximum measured concentrations, respectively. Among other, statistical analysis of the analytical results suggested that phthalates were potentially added in the later stages of plastic product manufacturing (labelling, gluing, etc.) and were not removed following recycling of household waste plastics. Furthermore, DEHP was identified as a potential indicator for phthalate contamination of plastics. Close monitoring of plastics intended for phthalates-sensitive applications is recommended if recycled plastics are to be used as raw material in production.

Defining Product Intake Fraction to Quantify and Compare Exposure to Consumer Products

There is a growing consciousness that exposure studies need to better cover near-field exposure associated with products use. To consistently and quantitatively compare human exposure to chemicals in consumer products, we introduce the concept of product intake fraction, as the fraction of a chemical within a product that is eventually taken in by the human population. This metric enables consistent comparison of exposures during consumer product use for different product-chemical combinations, exposure duration, exposure routes and pathways and for other life cycle stages. We present example applications of the product intake fraction concept, for two chemicals in two personal care products and two chemicals encapsulated in two articles, showing how intakes of these chemicals can primarily occur during product use. We demonstrate the utility of the product intake fraction and its application modalities within life cycle assessment and risk assessment contexts. The product intake fraction helps to provide a clear interface between the life cycle inventory and impact assessment phases, to identify best suited sentinel products and to calculate overall exposure to chemicals in consumer products, or back-calculate maximum allowable concentrations of substances inside products.