Update on volatile organic compound (VOC) source profiles and ozone formation potential in synthetic resins industry in China

Insight into VOCs source profiles by machine learning: Role of commonalities in synergistic pollution controls

Under the trend of low-carbon and cost-reduction, achieving efficient control requires identifying the commonalities in volatile organic compounds (VOCs) source profiles and implementing collaborative emissions reduction strategies. This study focuses on the analysis of common pollution characteristics in chemical industrial clusters, examining the emission behaviors of VOCs from nearly 200 emission outlets across 14 industries. A total of 593 VOCs were identified, including 488 new species. The highest concentration of newly discovered VOCs is 240 × 103 μg/m3, accounting for 91 %. The identical emission behavior of different components and isomers of industrial sources in several industries is revealed. The dominant species were redefined based on three dimensions. Using machine learning (ML), the maximum incremental reactivity (MIR) values of 488 VOCs were simulated, and based on the common characteristics of VOCs and photochemistry, VOC factor groups were identified that represent 75 %-80 % of the emission sources in the chemical industrial cluster. The average percentage of oxygenated volatile organic compounds (OVOCs) in this study was 28 % higher than in other studies. This study follows the trend of synergistic emission reduction, reduces the blindness of large-scale establishment and updating of source profiles, and provides an efficient control method of VOCs.

Volatile organic compounds in a typical petrochemical production area in Shanghai, China: Source profiles, human health and environmental impacts

Volatile organic compounds (VOCs) emitted from industrial facilities include significant precursors to the formation of aerosols and ozone in urban areas, often affecting atmospheric environments and public health. By investigating the VOC emission profiles across nine petrochemical production units, the predominant component in VOC emission profiles was alkanes, followed by oxygenated VOCs, aromatics, halocarbons, and alkenes. Aldehydes were identified as major contributors to odorous pollution. Chloroform, benzene, and 1,2-dibromoethane from petrochemical industry emissions exceeded health thresholds and will require targeted reduction measures. Additionally, three years of ambient VOC measurements (2020-2022) at two typical sites were analyzed to clarify VOC pollution characteristics and environmental impacts. The VOCs measured at both the Jiangwan residential (JW) and petrochemical industrial (PI) sites exhibited similar diurnal variations but different seasonal patterns. Source apportionment of VOCs using a positive matrix factorization model revealed five sources at PI and six sources at JW. Specific VOCs (e.g., dichloromethane) identified at JW were related to the petrochemical industry and solvent usage processes. Quantification of VOC photochemical reactivity indicated that the aromatic industry and solvent usage from the petrochemical industry significantly contributed more to both ozone and secondary organic aerosol formation potential than other sources, which underscores the need for stringent control measures by policymakers, particularly focusing on aromatic hydrocarbon production processes and the adoption of green solvents. The findings provide valuable insights for developing targeted VOC control strategies to mitigate their adverse effects on human health and environmental quality in regions heavily influenced by petrochemical activities.

Recent Advances in Combining Waterborne Acrylic Dispersions with Biopolymers

Water-based (meth)acrylic (co)polymer dispersions are produced on a large scale for various applications including coatings, adhesives, paints, and construction materials. A major benefit of waterborne polymer dispersions as compared to more traditional solvent-based alternatives is the low volatile organic compound (VOC) content, which results in an improved environmental profile. Following the trend of sustainability that has driven the growth of acrylic dispersions, recent research has focused on further enhancing the properties of these products by incorporating biobased materials such as polysaccharides (e.g., cellulose, starch, chitin, and chitosan), and proteins (e.g., casein, soy protein, and collagen). Amongst a large number of benefits, the incorporation of biomaterials can serve to decrease the amount of petroleum-based polymers in the formulation and can also contribute to enhance the physical properties of the resulting bio-composites. In this review, the beneficial role of these biopolymers when combined with waterborne acrylic systems is summarized. Recent advances in the use of these biobased and biodegradable materials are covered, aiming to provide guidance for the development of more sustainable, high-performance latex-based bio-composites with minimal environmental impact.

Odor nuisance, environmental impact and health risk of priority-controlled VOCs generated from three decentralized aerobic biological modes in treating rural perishable waste

Utilization of perishable waste has emerged as the pivotal factor in enhancing the quality and efficiency of garbage classification in rural regions of China. Nevertheless, the operation of small-scale decentralized aerobic biological treatment facilities in rural areas will inevitably result in the emission of malodorous volatile organic compounds (VOCs). In this study, VOCs emission characteristics of three typical decentralized facilities for the treatment of perishable waste in rural areas were investigated using cold trap enrichment combined with gas chromatography and mass spectrometry to elucidate the characteristics and potential effects on environment and human health. The concentration range of different points in the mechanical composting (MC) treatment mode is from 43.555 to 4154.281 (mean value, 947.292) µg/m3, in the solar-assisted composting (SAC) it is from 99.050 to 2064.308 (636.170) µg/m3, and in the bioconversion by black soldier fly larvae (BBSF) it is 93.712 to 718.644 (283.444) µg/m3. Odor nuisance analysis showed that oxygenated compounds and aromatic compounds were the main odoriferous VOCs. Among all detected VOCs, o-xylene, toluene, and acrolein have the highest ozone formation potential (OFP). Toluene, ethyl benzene, and xylene are the VOCs with secondary organic aerosol generation potential (SOAP). Health risk analysis revealed that six VOCs collectively represent a potential carcinogenic risk, while acrolein exhibits a non-carcinogenic risk. In light of the odor nuisance, environmental impact, and potential health risk, the priority-controlled VOCs identified in decentralized aerobic treatment modes of rural perishable waste were acrolein, benzyl chloride, ethyl acetate, etc. The findings of this research can serve as a valuable reference for the selection of proper strategies in the precise control of VOCs.

Prominent Composition-Dependent Dynamics Decoupling in the Choline Chloride-Glycerol Deep Eutectic Solvent System

Deep eutectic solvents (DESs) exhibit dynamic heterogeneity, where the intricate and dynamic hydrogen bonding within the DES mediates dynamic spatial variation in the DES local environment. The Type III DES composed of choline chloride and glycerol (ChCl:Gly) exhibits this effect prominently, and we report on the observed local organization and its dependence on system composition using the time-resolved reorientation dynamics of three illustrative chromophores of different polarities: perylene (neutral, nonpolar), oxazine 725 (cation, polar) and rose bengal (dianion, polar). Our findings demonstrate that the environments sensed by all three chromophores are markedly different than that predicted by the bulk viscosity of the DES, and that these local environments exhibit remarkably little change as the mole ratio of the DES constituents is varied. Taken collectively, these data provide clear evidence of short-range organization that bears very little resemblance to the longer-range structural organization that determines DES bulk properties.

Establishment and verification of anthropogenic speciated VOCs emission inventory of Central China

Improving the accuracy of anthropogenic volatile organic compounds (VOCs) emission inventory is crucial for reducing atmospheric pollution and formulating control policy of air pollution. In this study, an anthropogenic speciated VOCs emission inventory was established for Central China represented by Henan Province at a 3 km × 3 km spatial resolution based on the emission factor method. The 2019 VOCs emission in Henan Province was 1003.5 Gg, while industrial process source (33.7%) was the highest emission source, Zhengzhou (17.9%) was the city with highest emission and April and August were the months with the more emissions. High VOCs emission regions were concentrated in downtown areas and industrial parks. Alkanes and aromatic hydrocarbons were the main VOCs contribution groups. The species composition, source contribution and spatial distribution were verified and evaluated through tracer ratio method (TR), Positive Matrix Factorization Model (PMF) and remote sensing inversion (RSI). Results show that both the emission results by emission inventory (EI) (15.7 Gg) and by TR method (13.6 Gg) and source contribution by EI and PMF are familiar. The spatial distribution of HCHO primary emission based on RSI is basically consistent with that of HCHO emission based on EI with a R-value of 0.73. The verification results show that the VOCs emission inventory and speciated emission inventory established in this study are relatively reliable.

Ambient volatile organic compounds in a typical industrial city in southern China: Impacts of aromatic hydrocarbons from new industry

New industrial parks, including fine chemical, medical manufacturers, etc., are emerging in modern cities in China, whereas their emissions and impacts have not been fully illuminated. In this study, ambient volatile organic compounds (VOCs) in Huizhou were measured in three functional zones, namely new industrial, roadside, and residential zones. The average mixing ratios of total VOCs were as follow: industrial (56.22 ± 15.06 ppbv) > roadside (39.30 ± 12.96 ppbv) > residential (26.03 ± 7.31 ppbv). The ozone formation potential (OFP) and secondary organic aerosol formation potential (SOAP) of VOCs in the industrial zone were 1.5-2.3 and 1.7-3.1 times those in the other zones, respectively. Aromatics contributed the most to OFP (39.8 % - 44.8 %) and SOAP (78.9 % - 91.0 %), with much less contributions to VOCs mixing ratios (18.3 % - 21.2 %). Naphthalene was the most abundant aromatic species across the three zones and ranked among the top contributors to OFP and SOAP among all VOCs species. Source apportionment identified that new industrial emissions and solvent use was the largest VOCs contributor in the industrial zone (53.9 %), traffic-related emissions dominated in the roadside zone (40.7 %), while new industrial and traffic-related emissions contributed similar in the residential zone (32.9 % and 34.7 %, respectively). The carcinogenic and non-carcinogenic risks of hazardous VOCs were above the acceptable threshold, primarily due to new industrial and traffic-related emissions. Our results suggested to strengthen the control of new industrial emissions and aromatics sources in Huizhou city to improve air quality and protect human health.

Molecular-Scale Interactions in the Choline Chloride-Ethylene Glycol Deep Eutectic Solvent System: The Importance of Chromophore Charge in Mediating Rotational Dynamics

We report on the rotational diffusion dynamics of three chromophores (disodium fluorescein, oxazine 725, and perylene) in a series of choline chloride-ethylene glycol (ChCl:EG) deep eutectic solvent (DES) systems. We observe behavior independent of DES bulk viscosity for the cationic and neutral probes and behavior that is consistent with stick-limit interactions for the modified Debye-Stokes-Einstein model for the anionic probe. This finding indicates that the anionic species is integral to the interactions between DES constituent species that are responsible for local organization, consistent with previous MD simulations that showed higher interaction energies associated with both the hydrogen bond donor (EG) and hydrogen bond acceptor (Ch+) interactions with Cl- in ChCl:EG mixtures. The reorientation data reported here also indicate a region around 15 mol % ChCl where the stoichiometric relationship between the species gives rise to changes in the details of intermolecular interactions.

A combined experimental and computational investigation on the OH radical and Cl atom-initiated reaction of 2,3-dichloropropene in troposphere

Temperature-dependent kinetics of OH radical and Cl atom-initiated reaction of an important halogenated alkene, 2,3-Dichloropropene (23DCP), were investigated using absolute and relative methods over 278-363 K. Pulsed laser photolysis - laser induced fluorescence technique and relative rate method using gas chromatography with flame ionization detector were employed for studying the kinetics of 23DCP with OH radical and Cl atom, respectively. The obtained Arrhenius expressions were kOH(expt)=(4.08 ± 1.63) × 10-13exp{(1043 ± 124)/T} cm3 molecule-1 s-1 and kCl(expt)=(1.54 ± 0.24) × 10-11exp{(705 ± 48)/T} cm3 molecule-1 s-1. Computational calculations were conducted to validate our experimental kinetic results and provide new insights into the importance of a particular pathway among all based on thermodynamic parameters. The addition of OH/Cl to the terminal carbon of the double bond present in 23DCP proved to be the predominant pathway across the selected temperature range for the present study (200-400 K). The degradation mechanism of these reactions was proposed by analyzing the products with the aid of gas chromatography with mass spectrometry. Calculating various atmospheric implication parameters can help to understand how the release of 23DCP may affect the troposphere.

Cooperative and Bifunctional Adsorbent-Catalyst Materials for In-situ VOCs Capture-Conversion

Volatile organic compounds (VOCs) are gases that are emitted into the air from products or processes and are major components of air pollution that significantly deteriorate air quality and seriously affect human health. Different types of metals, metal oxides, mixed-metal oxides, polymers, activated carbons, zeolites, metal-organic frameworks (MOFs) and mixed-matrixed materials have been developed and used as adsorbent or catalyst for diversified VOCs detection, removal, and destruction. In this comprehensive review, we first discuss the general classification of VOCs removal materials and processes and outline the historical development of bifunctional and cooperative adsorbent-catalyst materials for the removal of VOCs from air. Subsequently, particular attention is devoted to design of strategies for cooperative adsorbent-catalyst materials, along with detailed discussions on the latest advances on these bifunctional materials, reaction mechanisms, long-term stability, and regeneration for VOCs removal processes. Finally, challenges and future opportunities for the environmental implementation of these bifunctional materials are identified and outlined with the intent of providing insightful guidance on the design and fabrication of more efficient materials and systems for VOCs removal in the future.

The underappreciated role of fugitive VOCs in ozone formation and health risk assessment emitted from seven typical industries in China

Fugitive emission from industrial sources may result in ozone formation and health risk, while the exact contribution of this source remains incompletely understood. In this study, emission characteristics, ozone formation potential (OFP) and health risk of fugitive VOCs in 7 representative industries were investigated. Chemical material industry was the dominant contributor to VOCs of fugitive emission in comparison with other industries. The OFP of VOCs from fugitive emission was in the range of 1.45 × 103-3.98 × 105 µg/m3, with a higher value than that of organized emission in seven industries except for the coking industry and the chemical material industry, suggesting that fugitive VOCs should be taken into account while developing control strategies. Acetaldehyde, m,p-xylene, n-nonane, ethylene, vinyl chloridethe and other high OFP-contributing species were the major reactive species that should be targeted. Health risk assessment investigated non-cancer and cancer risks of fugitive VOCs in 7 industries were all above safe level (HR > 1 and LCR > 1 × 10-4), posing remarkable health threats to human health. OVOCs were the main contributor to non-cancer risk, while halohydrocarbons and aromatics contributed most to cancer risks, posing remarkable health threat on human health. Our findings highlighted the contribution of fugitive VOCs on ozone formation and health risk was underestimated, indicating which should be considered in emission control strategies of industrial sources.

VOC emitted by biopharmaceutical industries: Source profiles, health risks, and secondary pollution

The biopharmaceutical industry contributes substantially to volatile organic compounds (VOCs) emissions, causing growing concerns and social developmental conflicts. This study conducted an on-site investigation of the process-based emission of VOCs from three biopharmaceutical enterprises. In the workshops of the three enterprises, 26 VOCs were detected, which could be sorted into 4 classes: hydrocarbons, aromatic hydrocarbons, oxygen-containing compounds, and nitrogen-containing compounds. Ketones were the main components of waste gases, accounting for 44.13%-77.85% of the overall VOCs. Process-based source profiles were compiled for each process unit, with the fermentation and extraction units of tiamulin fumarate being the main source of VOC emissions. Dimethyl heptanone, vinyl acetate, diethylamine, propylene glycol methyl ether (PGME), and benzene were screened as priority pollutants through a fuzzy comprehensive evaluation system. Ground level concentration simulation results of the Gauss plume diffusion model demonstrated that the diffusivity of VOCs in the atmosphere was relatively high, indicating potential non-carcinogenic and carcinogenic risks 1.5-2 km downwind. Furthermore, the process-based formation potentials of ozone and secondary organic aerosols (SOAs) were determined and indicated that N-methyl-2-pyrrolidone, dimethyl heptanone, and PGME should be preferentially controlled to reduce the ozone formation potential, whereas the control of benzene and chlorobenzene should be prioritized to reduce the generation of SOAs. Our results provide a basis for understanding the characteristics of VOC emission by biopharmaceutical industries and their diffusion, potentially allowing the development of measures to reduce health risks and secondary pollution.

Investigation of Plant-Level Volatile Organic Compound Emissions from Chemical Industry Highlights the Importance of Differentiated Control in China

The chemical industry is a significant source of nonmethane volatile organic compounds (NMVOCs), pivotal precursors to ambient ozone (O3), and secondary organic aerosol (SOA). Despite their importance, precise estimation of these emissions remains challenging, impeding the implementation of NMVOC controls. Here, we present the first comprehensive plant-level assessment of NMVOC emissions from the chemical industry in China, encompassing 3461 plants, 127 products, and 50 NMVOC compounds from 2010 to 2019. Our findings revealed that the chemical industry in China emitted a total of 3105 (interquartile range: 1179-8113) Gg of NMVOCs in 2019, with a few specific products accounting for the majority of the emissions. Generally, plants engaged in chemical fibers production or situated in eastern China pose a greater risk to public health due to their higher formation potentials of O3 and SOA or their proximity to residential areas or both. We demonstrated that targeting these high-risk plants for emission reduction could enhance health benefits by 7-37% per unit of emission reduction on average compared to the current situation. Consequently, this study provides essential insights for developing effective plant-specific NMVOC control strategies within China's chemical industry.

Understanding ozone episodes during the TRACER-AQ campaign in Houston, Texas: The role of transport and ozone production sensitivity to precursors

This study investigated transport pathways and photochemical formation responsible for ozone exceedances during the September 2021 deployment of the Tracking Aerosol Convection Interactions ExpeRiment/Air Quality (TRACER-AQ) campaign in Houston, Texas. We focused on two ozone episodes, September 6th-September 11th ("Episode 1") and September 23rd-September 26th ("Episode 2"), when the maximum daily eight-hour average (MDA8) ozone at surface monitors exceeded 70 ppbv. Long-range transport patterns of air masses during these episodes were from the central/northern US. High-resolution (4 km resolution) trajectory analysis with FLEXible PARTicle (FLEXPART) dispersion model revealed local recirculation of air masses and the accumulation of pollutants across Houston contribute to the ozone exceedances. Comprehensive Air Quality Model with extensions (CAMx) driven by 1.33-km resolution meteorology from the Weather Research and Forecast (WRF) tool simulated elevated ozone production rates during ozone episodes across the Houston metropolitan area, with ozone production hotspots mostly over Houston city and industrial districts of the Houston Ship Channel (HSC). The regional increase in ozone production rates was due to the transport of VOC-rich air masses (via northerly flows) that brought ozone precursors to the region, which ultimately caused a transition in the ozone formation tendency from generally VOC-limited to NOx-limited conditions. However, the city of Houston and the HSC remained in a VOC-limited regime because of local NOx emissions that, to some extent, preponderated the impact of transported VOCs. While approximately 37 % of the elevated ozone production was attributed to local photochemistry, the remaining ∼63 % increase in ozone production was due to the transported ozone to the region during episodes, bringing ozone to the Houston region and contributing to ozone exceedances. The outcomes of this study illustrated the synergy between transport and ozone production, both long-range and local scale, which resulted in ozone exceedances in Houston.

Emission factors and source profiles of volatile organic compounds from typical industrial sources in Guangzhou, China

Volatile organic compounds (VOCs) are important precursors of ozone (O₃) and fine particulate matter (PM_2.5). An accurate depiction of the emission characteristics of VOCs is the key to formulating VOC control strategies. In this study, the VOC emission factors and source profiles in five industrial sectors were developed using large-scale field measurements conducted in Guangzhou, China (100 samples for the emission factors and 434 samples for the source profile measurements). The emission factors based on the actual measurement method and the material balance method were 1.6-152.4 kg of VOCs per ton of raw materials (kg/t) and 3.1-242.2 kg/t, respectively. The similarities between the emission factors obtained using these two methods were examined, which showed a coefficient of divergence (CD) of 0.34-0.72. Among the 33 subdivided VOC source profiles developed in this study, sources including light guide plate (LGP), photoresist mask, and plastic products were the first time developed in China. Due to regional diversities in terms of production technologies, materials, and products, the emission characteristics of the VOCs varied, even in the same sector, thereby demonstrating the importance of developing localized source profiles of VOCs. The ozone formation potential (OFP) of the shipbuilding and repair sector from fugitive emissions was the highest value among all the industrial sectors. Controlling the emissions of aromatics and OVOCs was critical to reducing the O₃ growth momentum in industrial sectors. In addition, 1,2-dibromoethane showed high carcinogenic risk potentials (CRPs) during most of the industrial sectors and should be prioritized for controlling.

Construction and function of a high-efficient synthetic bacterial consortium to degrade aromatic VOCs

Aromatic volatile organic compounds (VOCs) are a type of common pollution form in chemical contaminated sites. In this study, seven aromatic VOCs such as benzene, toluene, ethylbenzene, chlorobenzene, m-xylene, p-chlorotoluene and p-chlorotrifluorotoluene were used as the only carbon source, and four strains of highly efficient degrading bacteria were screened from the soil of chemical contaminated sites, then the synthetic bacterial consortium was constructed after mixing with an existing functional strain (Bacillus benzoevorans) preserved in the laboratory. After that, the synthetic bacterial consortium was used to explore the degradation effect of simulated aromatic VOCs polluted wastewater. The results showed that the functional bacterium could metabolize with aromatic VOCs as the only carbon source and energy. Meanwhile, the growth of the synthetic bacterial consortium increased with the additional carbon resources and the alternative of organic nitrogen source. Ultimately, the applicability of the synthetic bacterial consortium in organic contaminated sites was explored through the study of broad-spectrum activity.

Catalytic ozonation of dichloromethane at low temperature and even room temperature on Mn-loaded catalysts

Five Mn-loaded catalysts were synthesized on γ-Al2O3, TiO2, ZrO2, nano γ-Al2O3 and nanoZrO2 supports. The catalytic ozonation of DCM (dichloromethane) was evaluated under industrial conditions (i.e., temperature, O3 input, H2O and SO2 content). According to results, >90% DCM conversion without O3 residue was achieved for all samples at 120 °C and an O3/DCM ratio of 6. At 20-120 °C, the highest Mn3+ content, abundant surface oxygen species and more weak acid sites led to the best performance of Mn/nanoAl2O3 (M/A-II). At 20 °C and 120 °C, 80% and 95% DCM can be degraded respectively on M/A-II at 20 °C with matched surface oxygen species and acidity. An O3/DCM ratio of 6 was optimal for performance and economy. For the effects of complex exhaust, both H2O and SO2 deactivated M/A-II. The H2O-induced deactivation was recoverable and also removed surface-deposited chlorine-containing species, enhancing the HCl selectivity. Finally, the Cl equilibrium of the reaction was comprehensively analyzed.

Pollution Characteristics and Health Risk Assessment of VOCs in Jinghong

In order to investigate the seasonal variation in chemical characteristics of VOCs in the urban and suburban areas of southwest China, we used SUMMA canister sampling in Jinghong city from October 2016 to June 2017. Forty-eight VOC species concentrations were analyzed using atmospheric preconcentration gas chromatography–mass spectrometry (GC–MS), Then, regional VOC pollution characteristics, ozone formation potentials (OFP), source identity, and health risk assessments were studied. The results showed that the average concentration of total mass was 144.34 μg·m−3 in the urban area and 47.81 μg·m−3 in the suburban area. Alkanes accounted for the highest proportion of VOC groups at 38.11%, followed by olefins (36.60%) and aromatic hydrocarbons (25.28%). Propane and isoprene were the species with the highest mass concentrations in urban and suburban sampling sites. The calculation of OFP showed that the contributions of olefins and aromatic hydrocarbons were higher than those of alkanes. Through the ratio of specific species, the VOCs were mainly affected by motor vehicle exhaust emissions, fuel volatilization, vegetation emissions, and biomass combustion. Combined with the analysis of the backward trajectory model, biomass burning activities in Myanmar influenced the concentration of VOCs in Jinghong. Health risk assessments have shown that the noncarcinogenic risk and hazard index of atmospheric VOCs in Jinghong were low (less than 1). However, the value of the benzene cancer risk to the human body was higher than the safety threshold of 1 × 10−6, showing that benzene has carcinogenic risk. This study provides effective support for local governments formulating air pollution control policies.

Implications of Mitigating Ozone and Fine Particulate Matter Pollution in the Guangdong-Hong Kong-Macau Greater Bay Area of China Using a Regional-To-Local Coupling Model

Ultrahigh-resolution air quality models that resolve sharp gradients of pollutant concentrations benefit the assessment of human health impacts. Mitigating fine particulate matter (PM2.5) concentrations over the past decade has triggered ozone (O3) deterioration in China. Effective control of both pollutants remains poorly understood from an ultrahigh-resolution perspective. We propose a regional-to-local model suitable for quantitatively mitigating pollution pathways at various resolutions. Sensitivity scenarios for controlling nitrogen oxide (NOx) and volatile organic compound (VOC) emissions are explored, focusing on traffic and industrial sectors. The results show that concurrent controls on both sectors lead to reductions of 17%, 5%, and 47% in NOx, PM2.5, and VOC emissions, respectively. The reduced traffic scenario leads to reduced NO2 and PM2.5 but increased O3 concentrations in urban areas. Guangzhou is located in a VOC-limited O3 formation regime, and traffic is a key factor in controlling NOx and O3. The reduced industrial VOC scenario leads to reduced O3 concentrations throughout the mitigation domain. The maximum decrease in median hourly NO2 is >11 μg/m³, and the maximum increase in the median daily maximum 8-hr rolling O3 is >10 μg/m³ for the reduced traffic scenario. When controls on both sectors are applied, the O3 increase reduces to <7 μg/m³. The daily averaged PM2.5 decreases by <2 μg/m³ for the reduced traffic scenario and varies little for the reduced industrial VOC scenario. An O3 episode analysis of the dual-control scenario leads to O3 decreases of up to 15 μg/m³ (8-hr metric) and 25 μg/m³ (1-hr metric) in rural areas.