Acid gas emission and ash fusion characteristics of multi-component leather solid waste incineration in bubbling fluidized bed

N2O emission factors in bubbling fluidized bed incineration of municipal sewage sludge: The China case

The N2O emissions resulting from sludge incineration are estimated using the default values published by the Intergovernmental Panel on Climate Change (IPCC), which may differ significantly from the actual emissions. In this investigation, N2O emissions from four sludge incineration lines in two plants were monitored for varying durations. The variation in N2O emission factors (EFs) between incineration lines of the same plant was much smaller than the difference between different plants. Data on N2O EFs obtained from brief monitoring may contain variabilities of up to 30%. N2O EFs were more sensitive to temperature changes at low temperatures, necessitating extended monitoring periods to improve the reliability of N2O monitoring outcomes in cases of low furnace temperatures. Excessive use of the SNCR system to reduce NOx emissions resulted in concentrations of N2O and NH3 in the exhaust gases exceeding NOx levels. In the case of furnace temperature control and advanced reburning technology, it is advisable to utilize actual monitoring data or the smaller default values provided by the IPCC in China. Otherwise, the estimated N2O emissions may exceed the actual emissions.

Evaluating combustion kinetics and quantifying fuel-N conversion tendency of shoe manufacturing waste

Combustion is an effective and cost-efficient thermochemical conversion method for solid waste, showing promise for the resource utilization of shoe manufacturing waste (SMW). However, SMW is generally composed of different components, which can lead to unstable combustion and excessive pollutant emissions, especially NOx. To date, combustion characteristics, reaction mechanism and fuel nitrogen (fuel-N) conversion of different SMW components remain unclear. In this work, the combustion behavior of typical SMW components combustion was investigated using Thermogravimetric coupled with Fourier transform infrared spectrum (TG-FTIR). A simplified single-step reaction mechanism was proposed according to the temperature interval to estimate reaction mechanism of SMW. Additionally, the relationship between fuel-N conversion tendency and fuel properties was established. The results indicate that the values for the comprehensive combustion performance index (S) and flammability index (C) range from 1.65 to 0.44 and 3.98 to 1.37, respectively. This demonstrates the significant variability in combustion behavior among different SMW components. Cardboard, leather and sponge have higher values of S and C, suggesting a better ignition characteristic and a stable combustion process. During the combustion of SMW, nitrogen oxides (NO and N2O) are the main nitrogen-containing compounds in the flue gases, with NO being the major contributor, accounting for over 82.97 % of the nitrogen oxides. NO has a negative correlation with nitrogen content, but it is opposite for N2O, HCN and NH3. Furthermore, the conversion of NO, N2O and NH3 is proportional to logarithmic values of O/N, while its conversion to HCN is proportional to logarithmic values of VM/N. These findings facilitate the prediction of the fuel-N conversion of solid waste combustion. This work might shed light on combustion optimization and in-situ pollutant emission control in solid waste combustion.