Automotive airborne brake wear debris nanoparticles and cytokinesis-block micronucleus assay in peripheral blood lymphocytes: A pilot study

Mobility of non-exhaust brake wear dust from road traffic in saturated and unsaturated porous media mimicking subsurface environments

Road traffic is a major source of atmospheric pollution, especially in urban areas, contributing significantly to particulate matter (PM) emissions. While electric vehicles (EVs) help reduce exhaust emissions, they do not substantially address non-exhaust emissions (NEEs), such as brake wear dust (BWD), which remains a significant source of PM, particularly in urban environments. This study investigates at a preliminary level the environmental fate of BWD, studying at the laboratory scale its mobility and behaviour in unsaturated and saturated porous media, which simulate subsoil and aquifer conditions. BWD, produced through friction between brake pads and rotors during deceleration, can settle on road surfaces, posing risks to soil and water quality through runoff and infiltration. Laboratory tests were conducted here to highlight BWD transport mechanisms in porous media. BWD mobility is influenced by ionic strength and flow velocity, with higher rates promoting particle transport, and higher ionic strengths inhibiting it. The study also highlights the importance of soil composition, with sandy soils allowing for greater BWD mobility than clay-rich soils. The findings evidence the need for continued research to better understand the environmental risks posed by BWD, particularly in unsaturated soils. Additionally, the potential of BWD to act as a carrier for other pollutants requires further investigation.

Review of Health Effects of Automotive Brake and Tyre Wear Particles

Non-exhaust emissions from brakes and tyres are becoming the major transport-related contributor of particulate matter (PM) pollution in cities. Furthermore, tyre microplastics are the major contributor of unintentionally released microplastics in all environmental compartments. The European Union introduced for the first time worldwide limits for brakes (PM10) and tyres (total abrasion mass) with the Euro 7 regulatory step. Thus, the interest in brake and tyre particles regarding health and environmental impacts has significantly increased in recent years. In this review, we summarise studies that assessed the impact of brake and tyre particles on human, mammalian, aquatic, and terrestrial cells and organisms. Furthermore, we summarise the studies that compared the impact of brake and tyre particles to other sources. We also critically examine the sampling methodologies of brake and tyre particles for health and environmental impact studies.

Copper-enriched automotive brake wear particles perturb human alveolar cellular homeostasis

BACKGROUND

Airborne fine particulate matter with diameter < 2.5 μm (PM2.5), can reach the alveolar regions of the lungs, and is associated with over 4 million premature deaths per year worldwide. However, the source-specific consequences of PM2.5 exposure remain poorly understood. A major, but unregulated source is car brake wear, which exhaust emission reduction measures have not diminished.

METHODS

We used an interdisciplinary approach to investigate the consequences of brake-wear PM2.5 exposure upon lung alveolar cellular homeostasis using diesel exhaust PM as a comparator. This involved RNA-Seq to analyse global transcriptomic changes, metabolic analyses to investigate glycolytic reprogramming, mass spectrometry to determine PM composition, and reporter assays to provide mechanistic insight into differential effects.

RESULTS

We identified brake-wear PM from copper-enriched non-asbestos organic, and ceramic brake pads as inducing the greatest oxidative stress, inflammation, and pseudohypoxic HIF activation (a pathway implicated in diseases associated with air pollution exposure, including cancer, and pulmonary fibrosis), as well as perturbation of metabolism, and metal homeostasis compared with brake wear PM from low- or semi-metallic pads, and also, importantly, diesel exhaust PM. Compositional and metal chelator analyses identified that differential effects were driven by copper.

CONCLUSIONS

We demonstrate here that brake-wear PM may perturb cellular homeostasis more than diesel exhaust PM. Our findings demonstrate the potential differences in effects, not only for non-exhaust vs exhaust PM, but also amongst different sources of non-exhaust PM. This has implications for our understanding of the potential health effects of road vehicle-associated PM. More broadly, our findings illustrate the importance of PM composition on potential health effects, highlighting the need for targeted legislation to protect public health.

Biological effects of brake wear particles in mammalian models: A systematic review

Road traffic is a major contributor to air pollution through aerosols both from exhaust emissions (EE) and non-exhaust emissions (NEE). NEE result from mechanical abrasion of brakes and tires, erosion of road surfaces and resuspension of road dust into the atmosphere by passing traffic. EE have been thoroughly studied and have decreased over time due to a stricter control. On the other hand, NEE have not received such attention and there is currently no legislation to specifically reduce NEE particles. Consequently, NEE relative part has become prevalent, potentially making of these emissions a major human health concern. The aim of this systematic review was to provide an overview of the current state of knowledge on the biological effects of brake wear particles, a type of NEE. To this end, we conducted a bibliographic search of two databases (PubMed and Web of Science) on June 1, 2023, focusing on the toxicological effects of brake wear particles induced in vitro and in vivo. We excluded reviews (no original experimental data), papers not written in English, studies performed in non-mammalian models and papers where no toxicity data were reported. Of the 291 papers, 19 were found to be relevant and included in our analysis, confirming that the assessment of the brake wear particles toxicity in mammalian models is still limited. This review also reports that brake wear particles can induce oxidative stress, proinflammatory response and DNA damage. Finally, some perspectives for further research and measures to mitigate the risk of brake wear emissions are discussed.

Alteration of Hordeum vulgare and Sinapis alba germination and early growth in response to airborne low-metallic automotive brake wear debris

Road transportation significantly contributes to environmental pollution, both in terms of exhaust and non-exhaust (brake wear) emissions. As was proven, brake wear debris is released in a wide variety of sizes, shapes, and compositions. Although studies confirming the possible adverse health and environmental impact of brake wear debris were published, there is no standardized methodology for their toxicity testing, and most studies focus only on one type of brake pad and/or one test. The lack of methodology is also related to the very small amount of material released during the laboratory testing. For these reasons, this study deals with the mixture of airborne brake wear debris from several commonly used low-metallic brake pads collected following the dynamometer testing. The mixture was chosen for better simulation of the actual state in the environment and to collect a sufficient amount of particles for thorough characterization (SEM, XRPD, XRF, chromatography, and particle size distribution) and phytotoxicity testing. The particle size distribution measurement revealed a wide range of particle sizes from nanometers to hundreds of nanometers, elemental and phase analysis determined the standard elements and compounds used in the brake pad formulation. The Hordeum vulgare and Sinapis alba were chosen as representatives of monocotyledonous and dicotyledonous plants. The germination was not significantly affected by the suspension of brake wear debris; however, the root elongation was negatively influenced in both cases. Sinapis alba (IC50 = 23.13 g L-1) was more affected than Hordeum vulgare (IC50 was not found in the studied concentration range) the growth of which was even slightly stimulated in the lowest concentrations of brake wear debris. The plant biomass was also negatively affected in the case of Sinapis alba, where the IC50 values of wet and dry roots were determined to be 44.83 g L-1 and 86.86 g L-1, respectively.

Toxicity and health effects of ultrafine particles: Towards an understanding of the relative impacts of different transport modes

Exposure to particulate matter (PM) has been associated with a wide range of adverse health effects, but it is still unclear how particles from various transport modes differ in terms of toxicity and associations with different human health outcomes. This literature review aims to summarize toxicological and epidemiological studies of the effect of ultrafine particles (UFPs), also called nanoparticles (NPs, <100 nm), from different transport modes with a focus on vehicle exhaust (particularly comparing diesel and biodiesel) and non-exhaust as well as particles from shipping (harbor), aviation (airport) and rail (mainly subway/underground). The review includes both particles collected in laboratory tests and the field (intense traffic environments or collected close to harbor, airport, and in subway). In addition, epidemiological studies on UFPs are reviewed with special attention to studies aimed at distinguishing the effects of different transport modes. Results from toxicological studies indicate that both fossil and biodiesel NPs show toxic effects. Several in vivo studies show that inhalation of NPs collected in traffic environments not only impacts the lung, but also triggers cardiovascular effects as well as negative impacts on the brain, although few studies compared NPs from different sources. Few studies were found on aviation (airport) NPs, but the available results suggest similar toxic effects as traffic-related particles. There is still little data related to the toxic effects linked to several sources (shipping, road and tire wear, subway NPs), but in vitro results highlighted the role of metals in the toxicity of subway and brake wear particles. Finally, the epidemiological studies emphasized the current limited knowledge of the health impacts of source-specific UFPs related to different transport modes. This review discusses the necessity of future research for a better understanding of the relative potencies of NPs from different transport modes and their use in health risk assessment.

A novel path towards limiting non-exhaust particulate matter emissions of a commercial friction material through the addition of metallurgical slag

Keeping recycling and the circular economy in mind, this study explores the reduction in emission of a highly optimized, commercially employed friction material formulation through the addition of metallurgical slags from a basic oxygen furnace in varying quantities from 6 to 38 wt%. The various compositions were paired with a pearlitic grey cast iron counterface and tested on a pin on disc tribometer. The friction coefficient and pin wear increased with the slag addition but were still within the permissible limit when compared to the original formulation. Specimens with higher slag content observed extremely compacted and extended secondary contact plateaus, which also recorded significant slag presence. The extended plateaus detached in the form of chunks from the mating surfaces, which settled on the equipment hardware and restricted the production of airborne particles. From an industrial symbiosis perspective, the addition of metallurgical slags proved to be a promising way of obtaining green friction materials with reduced emissions.

Static modelling of the material flows of micro- and nanoplastic particles caused by the use of vehicle tyres

The emissions of tyre wear particles (TWPs) into the environment are increasing and have negative impacts on the environment and human health. The aim of this study was therefore to establish a mass balance for vehicle tyres und TWP emissions in Austria using static material flow analysis, which enabled a quantification of mass flows of rubber including carbon black as the most mass-relevant tyre filler. Vehicle-specific and mileage-dependent emission factors were used to calculate the TWP emissions. The results for the year 2018 indicate that 80% of the tyre rubber remained in use, while 14% was re-treaded, recycled, incinerated or exported as end-of-life tyres and 6% was emitted as TWPs to air, soil or surface water. Of these 21,200 t/y released and dissipative lost TWPs, 6% were microscale, with a possible size between 0.1 and 10 μm, and 0.3% were nanoscale below 0.1 μm. The mass balance on the substance level shows that the TWPs contained 5,500 t/y of carbon black emitted in the form of airborne TWPs (6%) or entering in the soil or surface waters (47% each). Regarding air pollution from road vehicles, about 3,600 t/y were non-exhaust emissions, including tyre, brake and road-surface wear, which contributed to 9% of total dust emissions across Austria. Scenario analysis for 2050 with regard to e-mobility and the European Green Deal reveals that non-exhaust emissions can only be significantly reduced by a general reduction of the mileage or an environmentally friendly tyre design. This modelling approach provides a solid basis for decision makers in traffic planning as well as for chemical risk assessment. However, dynamic models with higher temporal and spatial resolution are needed to predict future mass flows of TWPs and their environmental fate, including their degradation products and possible accumulation effects.

Size-resolved, quantitative evaluation of the magnetic mineralogy of airborne brake-wear particulate emissions

Exposure to particulate air pollution has been associated with a variety of respiratory, cardiovascular and neurological problems, resulting in increased morbidity and mortality worldwide. Brake-wear emissions are one of the major sources of metal-rich airborne particulate pollution in roadside environments. Of potentially bioreactive metals, Fe (especially in its ferrous form, Fe²⁺) might play a specific role in both neurological and cardiovascular impairments. Here, we collected brake-wear particulate emissions using a full-scale brake dynamometer, and used a combination of magnetic measurements and electron microscopy to make quantitative evaluation of the magnetic composition and particle size of airborne emissions originating from passenger car brake systems. Our results show that the concentrations of Fe-rich magnetic grains in airborne brake-wear emissions are very high (i.e., ~100-10,000 × higher), compared to other types of particulate pollutants produced in most urban environments. From magnetic component analysis, the average magnetite mass concentration in total PM₁₀ of brake emissions is ~20.2 wt% and metallic Fe ~1.6 wt%. Most brake-wear airborne particles (>99 % of particle number concentration) are smaller than 200 nm. Using low-temperature magnetic measurements, we observed a strong superparamagnetic signal (indicative of ultrafine magnetic particles, < ~30 nm) for all of the analysed size fractions of airborne brake-wear particles. Transmission electron microscopy independently shows that even the larger size fractions of airborne brake-wear emissions dominantly comprise agglomerates of ultrafine (<100 nm) particles (UFPs). Such UFPs likely pose a threat to neuronal and cardiovascular health after inhalation and/or ingestion. The observed abundance of ultrafine magnetite particles (estimated to constitute ~7.6 wt% of PM_0.2) might be especially hazardous to the brain, contributing both to microglial inflammatory action and excess generation of reactive oxygen species.

Indoor and Outdoor Nanoparticle Concentrations in an Urban Background Area in Northern Sweden: The NanoOffice Study

In recent years, nanoparticles (NPs) have received much attention due to their very small size, high penetration capacity, and high toxicity. In urban environments, combustion-formed nanoparticles (CFNPs) dominate in particle number concentrations (PNCs), and exposure to those particles constitutes a risk to human health. Even though fine particles (<2.5 µm) are regularly monitored, information on NP concentrations, both indoors and outdoors, is still limited. In the NanoOffice study, concentrations of nanoparticles (10–300 nm) were measured both indoors and outdoors with a 5-min time resolution at twelve office buildings in Umeå. Measurements were taken during a one-week period in the heating season and a one-week period in the non-heating season. The measuring equipment SMPS 3938 was used for indoor measurements, and DISCmini was used for outdoor measurements. The NP concentrations were highest in offices close to a bus terminal and lowest in offices near a park. In addition, a temporal effect appeared, usually with higher concentrations of nanoparticles found during daytime in the urban background area, whereas considerably lower nanoparticle concentrations were often present during nighttime. Infiltration of nanoparticles from the outdoor air into the indoor air was also common. However, the indoor/outdoor ratios (I/O ratios) of NPs showed large variations between buildings, seasons, and time periods, with I/O ratios in the range of 0.06 to 0.59. The reasons for high indoor infiltration rates could be NP emissions from adjacent outdoor sources. We could also see particle growth since the indoor NPs were, on average, almost twice as large as the NPs measured outdoors. Despite relatively low concentrations of NPs in the urban background air during nighttime, they could rise to very high daytime concentrations due to local sources, and those particles also infiltrated the indoor air.

Assessment of genotoxic effects on elderly populations exposed to high traffic areas: Results for supporting public health surveillance

In urban areas with intense vehicular traffic, particulate matter in suspension, especially the fraction of particles with ultra-fine diameter, has been regarded as the main problem of chronic diseases in susceptible populations, such as the elderly. This study aimed to determine the genotoxic effects of exposure to air pollution evaluating the association between the frequencies of micronuclei (MN) and binucleated (BN) cells in exfoliated oral mucosa cells of elderly population and exposure conditions, considering the influence of traffic and concentration of PM in different aerodynamic diameters. Traffic of passenger vehicles, heavy duty trucks and environmental concentrations of Particulate Matter were measured twice a day during 28 days before biological sampling of oral mucosa from 154 participants living in areas of distinct levels of urban traffic. Data from this study showed that the group of participants living near road traffic exhibited higher MN cell frequency, when compared to the other groups of subjects. In addition, a canonical correlation analysis between environmental and genotoxicity variables analysis revealed that high concentrations of the particulate matter were correlated with intense traffic and the genotoxicity in exfoliated oral cells.

Airborne, Vehicle-Derived Fe-Bearing Nanoparticles in the Urban Environment: A Review

Airborne particulate matter poses a serious threat to human health. Exposure to nanosized (<0.1 μm), vehicle-derived particulates may be hazardous due to their bioreactivity, their ability to penetrate every organ, including the brain, and their abundance in the urban atmosphere. Fe-bearing nanoparticles (<0.1 μm) in urban environments may be especially important because of their pathogenicity and possible association with neurodegenerative diseases, such as Alzheimer's and Parkinson's diseases. This review examines current knowledge regarding the sources of vehicle-derived Fe-bearing nanoparticles, their chemical and mineralogical compositions, grain size distribution and potential hazard to human health. We focus on data reported for the following sources of Fe-bearing nanoparticles: exhaust emissions (both diesel and gasoline), brake wear, tire and road surface wear, resuspension of roadside dust, underground, train and tram emissions, and aircraft and shipping emissions. We identify limitations and gaps in existing knowledge as well as future challenges and perspectives for studies of airborne Fe-bearing nanoparticles.

Inhalation toxicity profiles of particulate matter: a comparison between brake wear with other sources of emission

Objective: There is substantial evidence that exposure to airborne particulate matter (PM) from road traffic is associated with adverse health outcomes. Although it is often assumed to be caused by vehicle exhaust emissions such as soot, other components may also contribute to detrimental effects. The toxicity of fine PM (PM2.5; <2.5 µm mass median aerodynamic diameter) released from brake pads was compared to PM from other sources. Materials and methods: PM2.5 of different types of brake pads (low-metallic, semi-metallic, NAO and ECE-NAO hybrid), tires and road pavement, poultry as well as the combustion of diesel fuel and wood (modern and old-fashioned stove technologies) were collected as suspensions in water. These were subsequently aerosolized for inhalation exposures. Female BALB/cOlaHsd mice were exposed for 1.5, 3, or 6 hours by nose-only inhalation up to 9 mg/m³. Results: Neither cytotoxicity nor oxidative stress was observed after exposure to any of the re-aerosolized PM2.5 samples. Though, at similar PM mass concentrations the potency to induce inflammatory responses was strongly dependent on the emission source. Exposure to most examined PM2.5 sources provoked inflammation including those derived from the poultry farm, wear emissions of the NAO and ECE-NAO hybrid brake pads as well as diesel and wood combustion, as indicated by neutrophil chemoattractant, KC and MIP-2 and lung neutrophil influx. Discussion and conclusions: Our study revealed considerable variability in the toxic potency of brake wear particles. Understanding of sources that are most harmful to health can provide valuable information for risk management strategies and could help decision-makers to develop more targeted air pollution regulation.

Physicochemical studies of aerosols at Montreal Trudeau Airport: The importance of airborne nanoparticles containing metal contaminants

Airborne particles, specifically nanoparticles, are identified health hazards and a key research domain in air pollution and climate change. We performed a systematic airport study to characterize real-time size and number density distribution, chemical composition and morphology of the aerosols (∼10 nm-10 μm) using complementary cutting-edge and novel techniques, namely optical aerosol analyzers, triple quad ICP-MS/MS and high-resolution STEM imaging. The total number density of aerosols, predominantly composed of nanoparticles, reached a maximum of 2 × 10⁶ cm^-3 and is higher than reported values from any other international airport. We also provide evidence for a wide range of metal in aerosols, and emerging metals in nanoparticles (e.g., Zn and Ni). The geometric mean, median and 99th and 1st percentile values of observed nanoparticle number densities at the apron were 1.0 × 10⁵, 9.0 × 10⁴, 1.2 × 10⁶ and 9.3 × 10³ cm^-3, respectively. These observations were statistically higher than corresponding measurements in downtown Montreal and at major highways during rush hour. This airport is thus a hotspot for nanoparticles containing emerging contaminants. The diurnal trends in concentrations exhibit peaks during flight and rush hours, showing correlations with pollutants such as CO. The HR-TEM-EDS provided evidence for nano-sized particles produced in combustion engines. Implications of our results for air pollution and health are discussed.

Biological response of an in vitro human 3D lung cell model exposed to brake wear debris varies based on brake pad formulation

Wear particles from automotive friction brake pads of various sizes, morphology, and chemical composition are significant contributors towards particulate matter. Knowledge concerning the potential adverse effects following inhalation exposure to brake wear debris is limited. Our aim was, therefore, to generate brake wear particles released from commercial low-metallic and non-asbestos organic automotive brake pads used in mid-size passenger cars by a full-scale brake dynamometer with an environmental chamber simulating urban driving and to deduce their potential hazard in vitro. The collected fractions were analysed using scanning electron microscopy via energy-dispersive X-ray spectroscopy (SEM-EDS) and Raman microspectroscopy. The biological impact of the samples was investigated using a human 3D multicellular model consisting of human epithelial cells (A549) and human primary immune cells (macrophages and dendritic cells) mimicking the human epithelial tissue barrier. The viability, morphology, oxidative stress, and (pro-)inflammatory response of the cells were assessed following 24 h exposure to ~ 12, ~ 24, and ~ 48 µg/cm2 of non-airborne samples and to ~ 3.7 µg/cm2 of different brake wear size fractions (2-4, 1-2, and 0.25-1 µm) applying a pseudo-air-liquid interface approach. Brake wear debris with low-metallic formula does not induce any adverse biological effects to the in vitro lung multicellular model. Brake wear particles from non-asbestos organic formulated pads, however, induced increased (pro-)inflammatory mediator release from the same in vitro system. The latter finding can be attributed to the different particle compositions, specifically the presence of anatase.