Assessment of agricultural waste-derived activated carbon in multiple applications

Optimizing filters of activated carbons obtained from biomass residues for ethylene removal in agro-food industry devices

A series of adsorbents (activated carbons, ACs) were synthesized by physical and chemical activation of olive stones (OS) and their textural and chemical characteristics determined by complementary techniques such as N2 and CO2 physisorption, pH of the point zero of charge (pHPZC), HRSEM or XPS. Samples with a wide range of physicochemical properties were obtained by fitting the activation procedure. The performance of these adsorbents in filters working under dynamic conditions was studied by determining the corresponding breakthrough curves for the ethylene removal. The physicochemical transformations of OS during activation were related with the adsorptive performance of derivative ACs. Results were compared to those obtained using commercial carbons, in particular ACs, carbon black or carbon fibers, in order to identify the properties of these materials on influencing the adsorptive performance. In general, ACs from OS perform better than the commercial samples, being also easily regenerated and properly used during consecutive adsorption cycles. CO2-activation showed to be the best synthesis option, leading to granular ACs with a suitable microporosity and surface chemistry. These results could favour the integration of this type of inexpensive materials on devices for the preservation of climacteric fruits, in a clear example of circular economy by reusing the agricultural residues.

Biopolymeric Nanocomposites for CO2 Capture

Carbon dioxide (CO2) impacts the greenhouse effect significantly and results in global warming, prompting urgent attention to climate change concerns. In response, CO2 capture has emerged as a crucial process to capture carbon produced in industrial and power processes before its release into the atmosphere. The main aim of CO2 capture is to mitigate the emissions of greenhouse gas and reduce the anthropogenic impact on climate change. Biopolymer nanocomposites offer a promising avenue for CO2 capture due to their renewable nature. These composites consist of biopolymers derived from biological sources and nanofillers like nanoparticles and nanotubes, enhancing the properties of the composite. Various biopolymers like chitosan, cellulose, carrageenan, and others, possessing unique functional groups, can interact with CO2 molecules. Nanofillers are incorporated to improve mechanical, thermal, and sorption properties, with materials such as graphene, carbon nanotubes, and metallic nanoparticles enhancing surface area and porosity. The CO2 capture mechanism within biopolymer nanocomposites involves physical absorption, chemisorption, and physisorption, driven by functional groups like amino and hydroxyl groups in the biopolymer matrix. The integration of nanofillers further boosts CO2 adsorption capacity by increasing surface area and porosity. Numerous advanced materials, including biopolymeric derivatives like cellulose, alginate, and chitosan, are developed for CO2 capture technology, offering accessibility and cost-effectiveness. This semi-systematic literature review focuses on recent studies involving biopolymer-based materials for CO2 capture, providing an overview of composite materials enriched with nanomaterials, specifically based on cellulose, alginate, chitosan, and carrageenan; the choice of these biopolymers is dictated by the lack of a literature perspective focused on a currently relevant topic such as these biorenewable resources in the framework of carbon capture. The production and efficacy of biopolymer-based adsorbents and membranes are examined, shedding light on potential trends in global CO2 capture technology enhancement.

Construction of a novel ursolic acid-based supramolecular gel for efficient removal of iodine from solution

Pentacyclic triterpenes is a natural amphipathic product which possess a rigid backbone and several polar functional groups such as hydroxyl, carbonyl and carboxyl groups. The amphipathic character makes it easy to realize self-assemble into complex nano structure and therefore attract extensive attention due to the simple synthetic processes and renewable raw materials. Hence, a novel Ursolic acid-based hydrogel was prepared successfully via a simple self-assembly of triterpenoid derivative in methanol by capture water molecule in air. The resulting hydrogel show a porous morphology and good elasticity including strong heat resistance. Based on the characteristic above, the hydrogel showed a good iodine adsorption capacity and can removal 75.0% of the iodine from cyclohexane solution and 66.3% from aqueous solution within 36 h. Data analysis indicate that all the iodine adsorption process are dominated by chemisorption and belongs to the multi-site adsorption on heterogenous surfaces. In addition, the obtained hydrogel also possesses a good recyclability which can maintain more than 82% of its capacity after 5 cycles. The simple preparation method and easily available raw materials endow it a great potential in future pollutant treatment.

Adsorption of methylene blue dye from aqueous solution using low-cost adsorbent: kinetic, isotherm adsorption, and thermodynamic studies

Fig leaf, an environmentally friendly byproduct of fruit plants, has been used for the first time to treat of methylene blue dye. The fig leaf-activated carbon (FLAC-3) was prepared successfully and used for the adsorption of methylene blue dye (MB). The adsorbent was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and the Brunauer-Emmett-Teller (BET). In the present study, initial concentrations, contact time, temperatures, pH solution, FLAC-3 dose, volume solution, and activation agent were investigated. However, the initial concentration of MB was investigated at different concentrations of 20, 40, 80, 120, and 200 mg/L. pH solution was examined at these values: pH3, pH7, pH8, and pH11. Moreover, adsorption temperatures of 20, 30, 40, and 50 °C were considered to investigate how the FLAC-3 works on MB dye removal. The adsorption capacity of FLAC-3 was determined to be 24.75 mg/g for 0.08 g and 41 mg/g for 0.02 g. The adsorption process has followed the Langmuir isotherm model (R² = 0.9841), where the adsorption created a monolayer covering the surface of the adsorbent. Additionally, it was discovered that the maximum adsorption capacity (Qm) was 41.7 mg/g and the Langmuir affinity constant (KL) was 0.37 L/mg. The FLAC-3, as low-cost adsorbents for methylene blue dye, has shown good cationic dye adsorption performance.

Digestate-derived carbonized char and activated carbon: Application perspective

The flourishment of anaerobic digestion (AD) on waste treatment emphasizes the importance of digestate valorization, which plays an essential role in determining the benefits provided by the AD process. The perception of digestate gradually shifts from waste to products to realize the concept of circular economy and maximize the benefits of digestate valorization. This review first outlined the current status of digestate valorization, focusing on thermal-chemical methods. The novel valorization methods were then summarized from the recent research, illustrating prospects for digestate valorization. Limits and perspectives are finally addressed. Methods for preparing digestate-derived activated carbon and impurity effects were elucidated. Inherent mineral content/inorganic impurity could be a niche for downstream use. High surface area and well-developed pore structure are essential for satisfying downstream use performance, but they are not the only factors. Digestate char applications other than use as an energy fuel are suggested.

Nanoporous carbon materials as a sustainable alternative for the remediation of toxic impurities and environmental contaminants: A review

Due to rapidly deteriorating water resources, the world is looking forward to a sustainable alternative for the remediation of noxious pollutants such as heavy metals and organic and gaseous contaminants. To address this global issue of environmental pollution, nanoporous carbon materials (NPCMs) can be used as a one-stop solution. They are widely applied as adsorbents for many toxic impurities and environmental contaminants. The present review provides a detailed overview of the role of different synthesis factors on the porous characteristics of carbon materials, activating agents, reagent-precursor ratio and their potential application in the remediation. Findings revealed that synthetic parameters result in the formation of microporous NPCMs (S_BET: >4000 m³/g; V_Total (cm³/g) ≥ 2; V_Micro (cm³/g) ≥ 1), micromesoporous (S_BET: >2500 m³/g; V_Total (cm³/g) ≥ 1.5; V_Micro (cm³/g) ≥ 0.7) and mesoporous (S_BET: >2500 m³/g; V_Total (cm³/g) ≥ 1.5; V_Micro (cm³/g) ≥ 0.5) NPCMs. Moreover, it was observed that a narrow pore size distribution (0.5-2.0 nm) yields excellent results in the remediation of noxious contaminants. Further, chemical activating agents such as NaOH, KOH, ZnCl₂, and H₃PO₄ were compared. It was observed that activating agents KОН, H₃PO₄, and ZnCl₂ were generally used and played a significant role in the possible large-scale production and commercialization of NPCMs. Thus, it can be interpreted that with a well-planned strategy for the synthesis, NPCMs with a "tuned" porosity for a specific application, in particular, microporosity for the accumulation and adsorption of energetically important gases (CO₂, CH₄, H₂), micro-mesoporosity and mesoporosity for high adsorption capacity for towards metal ions and a large number of dyes, respectively.

A review on the emerging applications of cellulose, cellulose derivatives and nanocellulose in carbon capture

Carbon capture can be implemented at a large scale only if the CO₂ selective materials are abundantly available at low cost. Since the sustainable requirement also elevated, the low-cost and biodegradable cellulosic materials are developed into CO₂ selective adsorbent and membranes recently. The applications of cellulose, cellulosic derivatives and nanocellulose as CO₂ selective adsorbents and membranes are reviewed here. The fabrication and modification strategies are discussed besides comparing their CO₂ separation performance. Cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs) isolated from cellulose possess a big surface area for mechanical enhancement and a great number of hydroxyl groups for modification. Nanocellulose aerogels with the large surface area were chemically modified to improve their selectivity towards CO₂. Even with the reduction of surface area, amino-functionalized nanocellulose aerogels exhibited the satisfactory chemisorption of CO₂ with a capacity of more than 2 mmol/g was recorded. Inorganic fillers such as silica, zeolite and MOFs were further incorporated into nanocellulose aerogels to enhance the physisorption of CO₂ by increasing the surface area. Although CO₂ adsorbents developed from cellulose and cellulose derivatives were less reported, their applications as the building blocks of CO₂ separation membranes had been long studied. Cellulose acetate membranes were commercialized for CO₂ separation, but their separation performance could be further improved with silane or inorganic filler. CNCs and CNFs enhanced the CO₂ selectivity and permeance through polyvinyl alcohol coating on membranes, but only CNF membranes incorporated with MOFs were explored so far. Although some of these membranes surpassed the upper-bound of Robeson plot, their stability should be further investigated.

Hybrid capacitive deionization of NaCl and toxic heavy metal ions using faradic electrodes of silver nanospheres decorated pomegranate peel-derived activated carbon

Capacitive deionization (CDI) is an evolving technology for eradicating salt and toxic heavy metal ions from brackish wastewater. However, traditional CDI electrodes have lower salt adsorption capacity and inadequate adsorption of selective metal ions for long-term operations. Herein, Ag nanospheres incorporated pomegranate peel-derived activated carbon (Ag/P-AC) was prepared and implied to the CDI process for removing NaCl, toxic mono-, di-, and trivalent metal ions. Morphological analysis revealed that the 80-100 nm-sized Ag nanospheres were uniformly decorated on the surfaces of P-AC nanosheets. The Ag/P-AC has a higher specific surface area (640 m² g^-1), superior specific capacitance (180 F g^-1 at 50 mV s^-1) and a lower charge transfer resistance (0.5 Ω cm²). CDI device was fabricated by Ag/P-AC as an anode, which adsorbed anions and P-AC as cathode for adsorption of positively charged ions at 1.2 V in an initial salt concentration of 1000 mg L^-1. An asymmetric Ag/P-AC//P-AC exhibited a maximum NaCl adsorption capacity of 36 mg g^-1 than symmetric P-AC//P-AC electrodes (22.7 mg g^-1). Furthermore, Pb(II), Cd(II), F^-, and As(III) ions were successfully removed from simulated wastewater by using Ag/P-AC//P-AC based CDI system. These asymmetric CDI-electrodes have an excellent prospect for the removal of salt and toxic contaminants in industrial wastewater.

Effluent treatment using activated carbon adsorbents: a bibliometric analysis of recent literature

Agricultural practices and industrial and human discharges play an important role in the generation of highly contaminated effluents, which becomes a threat to the environment. The persistence of many of these compounds to conventional treatments in recent years has meant that numerous efforts have been devoted to the proposal of new selective materials that allow the removal of these contaminants by adsorption. In addition, bibliometric studies have grown as powerful tools to indicate trends in innovation. In this way, the present study consisted of evaluating the potential interest to use activated carbon as adsorbent through a prospection study in scientific and technological databases. The number of records obtained for the use of activated carbon in effluent remediation processes is equivalent to 4898, which corresponds to approximately 2.5% of the total documents (articles/patents) found for the use of carbon with no defined purpose. A total of 2275 works that used the adsorptive property of activated carbon were recovered. According to the data recovered, Brazil is the leader in scientific publications among Latin American countries and the 12th worldwide, according to the SciELO and Scopus databases, respectively. In general, a significant number of patents have been recovered for this theme, in the Derwent database, 1167 documents were recovered. The results obtained in this work evidenced the growing interest in developing technologies in this area.