Enhancing remediation of PAH-contaminated soil through coupling electrical resistance heating using Na2S2O8

Green mechanochemical activation of solid persulfate to remove PAHs in soil: Performance and mechanism

Due to the high biotoxicity and persistence of polycyclic aromatic hydrocarbons (PAHs), the remediation of PAHs-contaminated soil becomes an intractable problem. Persulfate-based advanced oxidation processes are widely used to degrade PAHs in aquatic environment. However, they are not convenient for used in soil due to the heterogeneity and complexity of soil matrix. In this study, a green and convenient ball milling process is introduced to activate persulfate for the remediation of PAHs-contaminated soil. About 82.5% PAHs were removed with 10% wt. Na2S2O8 (PS) addition and ball-milling for 2 h under 500 r/min. The degradation of PAHs is attributed to the attack of radicals (SO4·- and·OH) generated from the activation of PS by mechanochemistry. Moreover, stable Si-O bonds were disrupted during ball-milling process, and formed free electron on the surface of soil particles. This facilitates the electron transfer from oxidants to contaminants. The particle size, surface element composition, functional group, and thermogravimetric analysis confirmed the slight disturbance of ball-milling-assisted PS process on the physical and chemical properties of soil. Therefore, ball-milling assisted PS approach would be a promising technology for the remediation of PAHs-contaminated soil.

In-situ thermal conductive heating (TCH) for soil remediation: A review

This paper provides a comprehensive overview of research works on in-situ thermal conductive heating (TCH), including heat transfer in soil, desorption behavior of pollutants, and mass transfer mechanism within the site. Each stage influences the effectiveness of subsequent stages. Comparison of simulation and experimental results demonstrates that heat transfer and temperature rise in soil are related to the hydrogeological conditions, wells layout and pollutants contents. Thermal desorption of pollutants from soil particles can be influenced by four aspects: energy input, pollutant properties, soil characteristics, and the binding state of pollutant in soil. The exponential decay kinetic model exhibits better applicability for fitting thermal desorption processes. After desorption, the pollutants migrate in soil driven by high temperature and extraction pressure, while hydrogeological conditions of the site determine the actual migration path and rate. Applying convection-dispersion model allows for quantitatively describing the complex migration behavior of pollutants in heterogeneous sites. Future research should focus more on the composite effects of multiple factors in TCH and develop multi-field coupling models through the combination of numerical simulation and in-situ experiments. Accurate characterization and prediction of entire TCH process can improve remediation efficiency, reduce energy costs, and achieve sustainable low-carbon remediation.

Synergetic degradation of perfluorooctanoic acid (PFOA) in soil using electrical resistance heating induced persulfate activation

Due to wastes from production of fluorinated materials and use of aqueous fire-fighting foams (AFFF), soils contaminated with perfluorooctanoic acid (PFOA) is of concern. However, current PFOA-contaminated soil disposal techniques have relatively low degradation efficiencies and are not suitable for on-site remediation. In this study, an electrical resistance heating (ERH) device and a box experimental device were used to study whether ERH induced persulfate activation (ERH/PS) could degrade PFOA in the soil. The results indicated that single ERH and single PS addition could not effectively degrade PFOA (with approximately 0.3 % and 3.9 % degradation after 9 h, respectively), while the degradation efficiency of PFOA with coupled ERH/PS could reach 87.3 % after 9 h of reaction. Moreover, effects of PS content, heating temperature, and soil organic matter on the degradation of PFOA were explored. During the ERH/PS process, PFOA was gradually transformed into short chain perfluorinated compounds and finally mineralized to fluoride ions. Finally, using a box experimental device, PS was effectively transported to the target contaminated area through electrokinetic (EK)-assisted delivery. After activating PS through ERH, the degradation rate of PFOA could reach 95.5 %. This is a novel study demonstrating the feasibility of ERH induced PS activation to degrade PFOA in soil, which provides a potential on-site strategy for remediation of PFOA-contaminated soil.

Mechanism of nitro-byproducts formation during persulfate-based electrokinetic in situ oxidation for remediation of anthracene contaminated soil

Persulfate-based electrokinetic (EK) chemical oxidation appears to be a novel and viable strategy for the in situ remediation of polycyclic aromatic hydrocarbons (PAHs) polluted soil; however, the possible toxic byproducts of PAHs have been overlooked. In this study, we systematically investigated the formation mechanism of the nitro-byproducts of anthracene (ANT) during the EK process. Electrochemical experiments revealed that NH₄⁺ and NO₂^- originating from nitrate electrolyte or soil substrates were oxidized to NO₂^• and NO^• in the presence of SO₄^•-. Liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF-MS/MS) analysis with ¹⁵N labeling revealed the formation of nitro-byproducts (14 kinds), including 1-hydroxy-4-nitro-anthraquinone and its similar derivatives, 4-nitrophenol, and 2,4-dinitrophenol. The nitration pathways of ANT have been proposed and described, mainly including the formation of hydroxyl-anthraquinone-oxygen and phenoxy radicals and the subsequent addition of NO₂^• and NO^•. ANT-based formation of nitro-byproducts during EK, which is usually underestimated, should be further investigated due to their enhanced acute toxicity, mutagenic effects, and potential threat to the ecosystem.

The era of low-permeability sites remediation and corresponding technologies: A review

Rational utilization of soil resources and remediation of contaminated soils are imperative due to the rapidly growing demand for clean soils. Currently, many in-situ remediation technologies are less suitable at low-permeability sites due to the limitations of soil permeability. This work defines a low-permeability site as a site with hydraulic conductivity less than 10^-4 cm/s, and summarizes the migration characteristics of representative contaminants at low-permeability sites, and discusses the principles and practical applications of different technologies suitable for the remediation of low-permeability sites, including electrokinetic remediation technology, polymer flushing technology, fracturing technology, and in-situ thermal remediation technology. Enhanced and combined remediation technologies are further described because one remediation technology cannot remediate all contaminants. The prospects for the application of remediation technologies to low-permeability sites are also proposed. This work highlights the necessity of low-permeability sites remediation and the urgent need for new remediation technologies, with the hope to inspire future research on low-permeability sites.

Enhanced semi-volatile DNAPL accessibility at sub-boiling temperature during electrical resistance heating in heterogeneous porous media

Successful remediation of semi-volatile contaminants using electrical resistance heating (ERH) coupled technologies requires a deep understanding of contaminant migration and accessibility, especially with stratigraphic heterogeneity and dense nonaqueous phase liquid (DNAPL) occurrence. Here, we chose nitrobenzene (NB) as a model contaminant of semi-volatile DNAPL and uniquely demonstrated that temperature variation during ERH could induce NB DNAPL migration out of the low permeability zone (LPZ) even below water boiling temperature. When heating the system using alternating current (AC) of 140 V to a temperature range of 50-79 °C, obvious DNAPL migration was visually observed. The upward migration of DNAPL would considerably increase the mass of accessible contaminant by other remediation measures. The downstream cumulative NB mass of 1092 mg in 140 V system raised 56-folds compared to that of 19 mg in the control experiment with only groundwater flow. This migration was mainly attributed to a complex natural convection caused by temperature gradient. Comparing with traditional AC heating, ERH powered by pulsed direct current (PDC-ERH) showed a higher and more uneven heating pattern, resulting in a stronger convection at the same voltage that enhanced the DNAPL migration out of LPZ. These results revealed the importance of natural convection in the ERH process, which could be further optimized to improve the energy efficiency of remediation.

Cement kiln co-processing promotes the redevelopment of industrially contaminated land in China: Spatio-temporal features and efficiency analysis

The cleanup and redevelopment of industrially contaminated land are essential for sustainable urban development, both from economic and environmental perspectives. Remediation efforts in developed countries have incurred high decontamination costs and administrative, monitoring, and enforcement requirements that are beyond the capabilities of many developing nations. Here, we reviewed the development of cement kiln co-processing of contaminated soils, a commonly used remediation strategy in China, and discussed the spatio-temporal features, benefits and efficiency of co-processing. Our results show that urbanization, the real estate market, and policies have impacts on the development of technology. By June 2021, cement kiln co-processing has disposed of approximately 2,633, 823 m³ of contaminated soils, and the average feed rates of organic pollutants, combined pollution, and heavy metals are 6%, 4%, and 3%, respectively. The average cost of co-processing contaminated soil is US$167.2 per cubic meter, which is lower than that of other conventional remedies. Based on the pollution status and cement production capacity, it is most likely that the co-processing strategy will be adopted by three countries of India, Indonesia, and Vietnam in the next few years. In the future, more data will be needed to quantify and assess the technology diffusion at the provincial level and the technological details of adopting this strategy.

Effect of starch-derived organic acids on the removal of polycyclic aromatic hydrocarbons in an aquaculture-sediment microbial fuel cell

This study constructed sediment microbial fuel cells (SMFCs) for polycyclic aromatic hydrocarbons (PAHs) removal in contaminated aquaculture sediment. Starch, a waste deposited in aquaculture sediment, was employed as the co-substrate for electricity generation and PAHs removal, and the effect of starch-derived organic acids on SMFC performance was assessed. The results indicated that sufficient starch promoted PAHs removal (69.9% for naphthalene, 55.6% for acenaphthene, and 46.8% for pyrene) in dual-chamber SMFC, whereas excessive starch attenuated SMFC performance because the organic acids accumulation reduced anode pH, decreased species diversity, and changed the microbial communities. The electricity generation and PAHs removal were positively correlated (R > 0.96), and both of them were related to Macellibacteroides belonging to Bacteroidetes. However, a larger single-chamber SMFC device did not obtain enhanced PAHs removal owing to the restricted "effective range" of the anode. Hence, more challenges need to be addressed to realize the practical application of SMFC.