Development of label-free fluorescent biosensor for the detection of kanamycin based on aptamer capped metal-organic framework

Ratiometric fluorescence platform for the ultrasensitive detection of kanamycin based on split aptamer co-recognition triggers Mg2+-DNAzyme-driven DNA walker systems

In this work, a novel 3D-DNA walker signal amplification strategy was designed to construct a fluorescent aptasensor for the detection of kanamycin (KAN). The aptasensor utilizes split aptamers for the synergistic recognition of KAN. The presence of KAN induces the split aptamers recombination to form the Mg2+-DNAzyme structure, which is activated by Mg2+ to drive the 3D-DNA walker process for cascading signal amplification. Employing gold nanoflowers (AuNFs) as walking substrate material increases the local DNA concentration to enhance the walker efficiency. The prepared fluorescent aptasensor achieved efficient and sensitive detection of KAN with satisfactory results in the concentration range of 1 × 10-8 - 1 × 10-3 μg/kg and the detection limit of 5.63 fg/kg. Meanwhile, the designed fluorescent aptasensor exhibited favorable specificity, anti-interference, storage stability and reproducibility, and verified the feasibility of its application in milk samples. The present work provides an effective tool for the regulation of KAN contamination in animal-derived foods with promising prospects.

Dual-ligand lanthanide metal-organic framework based ratiometric fluorescent platform for visual monitoring of aminoglycoside residues in food samples

Herein, a dual-emission Eu metal-organic framework (Eu-MOF) is prepared and used as the ratiometric fluorescence probe for ultrasensitive detection of aminoglycoside antibiotics (AGs). Due to the strong hydrogen bond interactions between AGs and Eu-MOF, the blue emission is enhanced while the red emission has little fluctuation in Eu-MOF with the addition of AGs, thus a good linear relationship with the logarithm of AGs concentrations from 0.001 to 100 μg/mL can be established for quantitative analysis. Good sensitivity with the detection limit of 0.33 ng/mL for apramycin, 0.32 ng/mL for amikacin and 0.30 ng/mL for kanamycin is achieved. The proposed assay demonstrates good selectivity and applicability for determination of AGs in real milk and honey samples. The Eu-MOF materials are further fabricated as fluorescent test papers for facile visual detection. The as-established ratio fluorescence platform offers a portable and economical way for rapid monitoring AGs residues in complex food samples.

Sub-femtomolar capacitance-based biosensing of kanamycin using screen-printed electrodes coated with redox-active polymeric films

An ultrasensitive capacitance-based biosensor has been developed capable of detecting the kanamycin (KAN) antibiotic at sub-femtomolar levels. The biosensor was constructed using a potential-pulse-assisted method, allowing for the layer-by-layer deposition of a melanin-like polymeric film (MLPF) on an electrode surface modified with gold nanoparticles (AuNPs). The MLPF was formed through the electrochemical polymerization of dopamine and the specific kanamycin aptamer. By optimizing the operating parameters, we achieved a label-free detection of kanamycin by monitoring the variation of pseudocapacitive properties of the MLPF-modified electrode using electrochemical impedance spectroscopy. The developed biosensor demonstrated a wide linear response ranging from 1 fM to 100 pM, with a remarkable limit of detection of 0.3 fM (S/N = 3) for kanamycin. Furthermore, the biosensor was successfully applied to detect kanamycin in milk samples, exhibiting good recovery. These findings highlight the promising potential of the aptasensor for determination of antibiotic residues and ensuring food safety. In conclusion, our ultrasensitive capacitance-based biosensor provides a reliable and efficient method for detecting trace amounts of kanamycin in dairy products. This technology can contribute to safeguarding consumer health and maintaining high food safety standards.

Nanomaterial interfaces designed with different biorecognition elements for biosensing of key foodborne pathogens

Foodborne diseases caused by pathogen bacteria are a serious problem toward the safety of human life in a worldwide. Conventional methods for pathogen bacteria detection have several handicaps, including trained personnel requirement, low sensitivity, laborious enrichment steps, low selectivity, and long-term experiments. There is a need for precise and rapid identification and detection of foodborne pathogens. Biosensors are a remarkable alternative for the detection of foodborne bacteria compared to conventional methods. In recent years, there are different strategies for the designing of specific and sensitive biosensors. Researchers activated to develop enhanced biosensors with different transducer and recognition elements. Thus, the aim of this study was to provide a topical and detailed review on aptamer, nanofiber, and metal organic framework-based biosensors for the detection of food pathogens. First, the conventional methods, type of biosensors, common transducer, and recognition element were systematically explained. Then, novel signal amplification materials and nanomaterials were introduced. Last, current shortcomings were emphasized, and future alternatives were discussed.

Ultrasensitive and simultaneous monitoring of multiple small-molecule pollutants on an immunochromatographic strip with multilayered film-like fluorescent tags

A wide variety of small-molecule pollutants is harmful to human health, and their highly sensitive universal and rapid detection in complex environments remains a challenge. Herein, a multiplexed and ultrasensitive immunochromatographic strip (ICS) was developed for the universal analysis of three kinds of different pollutants based on multilayered fluorescent nanofilm-guided signal amplification. Flexible three-dimensional nanofilms (GO-MQD) with large surface areas, high quantum dot (QD) loading, superior luminescence, and good stability were synthesized through the electrostatic adsorption-mediated layer-by-layer assembly of three layers of small QDs onto two-dimensional graphene oxide (GO) nanosheets, modified with specific antibodies, and utilized as enhanced fluorescent tags in the ICS method for quantitative target detection. By combining the GO-MQD nanofilms and multiplexed ICS, the proposed assay can rapidly and sensitively detect aflatoxin B1, clenbuterol, and kanamycin in actual samples/environmental samples (pork extract, milk, river water, and lake water) with low detection limit (0.87, 2.04, and 0.81 pg/mL), fast testing time (15 min), good stability and high reproducibility (RSD < 8.71 %). The GO-MQD-ICS method developed here exhibits great potential to meet the demands of the on-site and practical detection of small-molecule pollutants.

Luminescent Guests Encapsulated in Metal-Organic Frameworks for Portable Fluorescence Sensor and Visual Detection Applications: A Review

Metal-organic frameworks (MOFs) have excellent applicability in several fields and have significant structural advantages, due to their open pore structure, high porosity, large specific surface area, and easily modifiable and functionalized porous surface. In addition, a variety of luminescent guest (LG) species can be encapsulated in the pores of MOFs, giving MOFs a broader luminescent capability. The applications of a variety of LG@MOF sensors, constructed by doping MOFs with LGs such as lanthanide ions, carbon quantum dots, luminescent complexes, organic dyes, and metal nanoclusters, for fluorescence detection of various target analyses such as ions, biomarkers, pesticides, and preservatives are systematically introduced in this review. The development of these sensors for portable visual fluorescence sensing applications is then covered. Finally, the challenges that these sectors currently face, as well as the potential for future growth, are briefly discussed.

A Novel Fluorescent Aptasensor for Arsenic(III) Detection Based on a Triple-Helix Molecular Switch

A novel aptamer-based fluorescent-sensing platform with a triple-helix molecular switch (THMS) was proposed as a switch for detecting the arsenic(III) ion. The triple helix structure was prepared by binding a signal transduction probe and arsenic aptamer. Additionally, the signal transduction probe labeled with fluorophore (FAM) and quencher (BHQ1) was employed as a signal indicator. The proposed aptasensor is rapid, simple and sensitive, with a limit of detection of 69.95 nM. The decrease in peak fluorescence intensity shows a linear dependence, with the concentration of As(III) in the range of 0.1 µM to 2.5 µM. The whole detection process takes 30 min. Moreover, the THMS-based aptasensor was also successfully used to detect As(III) in a real sample of Huangpu River water with good recoveries. The aptamer-based THMS also presents distinct advantages in stability and selectivity. The proposed strategy developed herein can be extensively applied in the field of food inspection.

Construction of a dual-model aptasensor based on G-quadruplexes generated via rolling circle amplification for visual/sensitive detection of kanamycin

A dual-model colorimetric and electrochemical aptasensor was designed using a large number of G-quadruplexes generated by rolling circle amplification (RCA). Specific binding between target and aptamer during RCA yielded large numbers of G-quadruplexes. A colorimetric sensor was fabricated based on the interaction between the G-quadruplex and hemin, which altered the 3,3',5,5'-Tetramethylbenzidine (TMB)-catalyzed color reaction and facilitated the visual and semi-quantitative detection of kanamycin. An electrochemical sensor was constructed based on the strong interaction between the G-quadruplex and the methylene blue electrical signal molecule. Combining nanocomposites multi-walled carbon nanotubes-chitosan/gold nanoparticles (MWCNTs-CS/AuNPs) and RCA realized double-amplified electrochemical signals. Under optimized conditions, a linear relationship was obtained as the logarithm of different concentrations of kanamycin (KAN). The colorimetric aptasensor had a linear range of 1 × 10² nM to 1 × 10³ nM with a detection limit of 1.949 nM. The electrochemical aptasensor had wider a linear range from 1 × 10^-3 nM to 2.5 × 10³ nM and a lower detection limit of 0.333 pM. The sensor combined the advantages of simple colorimetric visualization with the ultra-precision of electrochemical methods. Aptasensor showed good specificity and prevented interference. Furthermore, the prepared dual-model aptasensor facilitated the practical monitoring of KAN in milk.