Influence of water matrix components on the UV/chlorine process and its reactions mechanism

Advanced oxidation processes for water and wastewater treatment - Guidance for systematic future research

Advanced oxidation processes (AOPs) are a growing research field with a large variety of different process variants and materials being tested at laboratory scale. However, despite extensive research in recent years and decades, many variants have not been transitioned to pilot- and full-scale operation. One major concern are the inconsistent experimental approaches applied across different studies that impede identification, comparison, and upscaling of the most promising AOPs. The aim of this tutorial review is to streamline future studies on the development of new solutions and materials for advanced oxidation by providing guidance for comparable and scalable oxidation experiments. We discuss recent developments in catalytic, ozone-based, radiation-driven, and other AOPs, and outline future perspectives and research needs. Since standardized experimental procedures are not available for most AOPs, we propose basic rules and key parameters for lab-scale evaluation of new AOPs including selection of suitable probe compounds and scavengers for the measurement of (major) reactive species. A two-phase approach to assess new AOP concepts is proposed, consisting of (i) basic research and proof-of-concept (technology readiness levels (TRL) 1-3), followed by (ii) process development in the intended water matrix including a cost comparison with an established process, applying comparable and scalable parameters such as UV fluence or ozone consumption (TRL 3-5). Subsequent demonstration of the new process (TRL 6-7) is briefly discussed, too. Finally, we highlight important research tools for a thorough mechanistic process evaluation and risk assessment including screening for transformation products that should be based on chemical logic and combined with complementary tools (mass balance, chemical calculations).

Far-UV-C irradiation promotes synergistic bactericidal action against adhered cells of Escherichia coli and Staphylococcus epidermidis

The contamination of indoor areas is a global health problem that can cause the dispersion of infectious diseases. In that sense, it is urgent to find new strategies applying a lower concentration of the traditional chemicals used for cleaning and disinfection. Ultraviolet radiation (UV), in particular far-UV-C (200-225 nm), has emerged as a successful, powerful, easy-to-apply, and inexpensive approach for bacterial eradication that still requires scientific assessment. This study investigated new strategies for disinfection based on far-UV-C (222 nm) combined with chlorine and mechanical cleaning, providing an innovative solution using low doses. The bactericidal activity of far-UV-C (222 nm) was tested at an intensity of irradiation from 78.4 μW/cm2 to 597.7 μW/cm2 (for 1 min) against Escherichia coli and Staphylococcus epidermidis adhered on polystyrene microtiter plates. It was further tested in combination with mechanical cleaning (ultrasounds for 1 min) and free chlorine (0.1, 0.5, and 1 mg/L for 5 min). The triple combination consisting of mechanical cleaning + free chlorine (0.5 mg/L) + far-UV-C (54 mJ/cm2) was tested against cells adhered to materials found in hospital settings and other public spaces: polyvinyl chloride (PVC), stainless steel (SS), and polyetheretherketone (PEEK). Disinfection with far-UV-C (54 mJ/cm2) and free chlorine at 0.5 mg/L for 5 min allowed a total reduction of culturable E. coli cells and a logarithmic reduction of 2.98 ± 0.03 for S. epidermidis. The triple combination of far-UV-C, free chlorine, and mechanical cleaning resulted in a total reduction of culturable cells for both adhered bacteria. Bacterial adhesion to PVC, SS, and PEEK occurred at distinct extents and influenced the bactericidal activity of the triple combination, with logarithmic reductions of up to three. The overall results highlight that, based on culturability assessment, far-UV-C (54 mJ/cm2) with chlorine (0.5 mg/L; 5 min) and mechanical cleaning (1 min) as an efficient disinfection strategy using mild conditions. The combination of culturability and viability assessment of disinfection is recommended to detect regrowth events and increase the effectiveness in microbial growth control.

Modeling and optimization of synergistic ozone-ultraviolet-chlorine process for reclaimed water disinfection: From laboratory tests to software simulation

The ozone-ultraviolet (UV)-chlorine process is a highly effective method of disinfection in water reuse system, but currently still lacks precise quantification and accurate control. It is difficult to determine the dosage of each disinfectant because of the complex interactions that occur between disinfection units and the complicated mathematical calculation required. In this study, we proposed a dosage optimization model for ozone-UV-chlorine synergistic disinfection process. The model was able to identify the cost-effective doses of the disinfectants under the constraints of microbial inactivation, decolorization, and residual chlorine retention requirements. Specifically, the simulation of microbial inactivation rates during synergistic disinfection process was accomplished through quantification of the synergistic effects between disinfection units and the introduction of enhancement coefficients. In order to solve this optimization model rapidly and automatically, a MATLAB-based software program with graphical user interface was developed. This software consisted of calibration unit, prediction unit, assessment unit, and optimization unit, and was able to simulate synergistic ozone-UV-chlorine process and identify the optimal dose of ozone, UV, and chlorine. Validation experiments revealed good agreements between the experimental data and the results calculated by the developed software. The developed software is believed to help the water reclamation plants improve disinfection efficiency and reduce the operational costs of synergistic disinfection processes.

Soil science and environmental research

As indicated in the call for papers posted for this Special Issue, Soil Science deals with various environmental compartments, so it is closely related to Environmental Research. It is clear that synergisms and collaboration are keys to reach the most fruitful relations among different sciences and scientists, and especially in all that focused on the Environment. In this line, considering Soil Science, Environmental Research, and the multiple and complex eventual combinations involving them, could give new highly interesting works focused on any of the specific subjects covered, as well as on relations among these sciences. The main objective should be going further in positive interactions that could help in protecting the Environment, proposing solutions to face hazards that are drastically threatening our planet. In view of that, the Editors of this Special Issue invited researchers to submit high-quality manuscripts including new experimental data, as well as scientifically founded discussion and reflections on the matter. The VSI has received 171 submissions, with 27% of them being accepted after peer-review. The Editors think that the papers included in this VSI have high scientific value and provide scientific knowledge on the field. In this editorial piece the Editors include comments and reflections on the papers published in the SI.