Photocatalytic investigation of textile dyes and E. coli bacteria from wastewater using Fe3O4@MnO2 heterojunction and investigation for hydrogen generation on NaBH4 hydrolysis

Innovative treatment of industrial effluents through combining ferric iron and attapulgite application

The escalation of industrial activities has escalated the production of pharmaceutical and dyeing effluents, raising significant environmental issues. In this investigation, a hybrid approach of Fenton-like reactions and adsorption was used for deep treatment of these effluents, focusing on effects of variables like hydrogen peroxide concentration, catalyst type, pH, reaction duration, temperature, and adsorbent quantity on treatment effectiveness, and the efficacy of acid-modified attapulgite (AMATP) and ferric iron (Fe(III))-loaded AMATP (Fe(III)-AMATP) was examined. Optimal operational conditions were determined, and the possibility of reusing the catalysts was explored. Employing Fe3O4 as a heterogeneous catalyst and AMATP for adsorption, CODCr was reduced by 78.38-79.14%, total nitrogen by 71.53-77.43%, and phosphorus by 97.74-98.10% in pharmaceutical effluents. Similarly, for dyeing effluents, Fe(III)-AMATP achieved 79.87-80.94% CODCr, 68.59-70.93% total nitrogen, and 79.31-83.33% phosphorus reduction. Regeneration experiments revealed that Fe3O4 maintained 59.48% efficiency over three cycles, and Fe(III)-AMATP maintained 62.47% efficiency over four cycles. This work offers an economical, hybrid approach for effective pharmaceutical and dyeing effluent treatment, with broad application potential.

Magnetic cobalt metal organic framework for photocatalytic water splitting hydrogen evolution

Using water as a renewable and safe energy source for hydrogen generation has reduced the need to use toxic fossil fuels. Photocatalytic approaches provide a worthy solution to avoid the high expenditure on complicated electrochemical pathways to promote Hydrogen Evolution Reactions. However, several types of photocatalysts including noble metal-based catalysts have already been in use for this purpose, which are generally considered high-cost as well. The present study aims to use the benefits of metal-organic frameworks (MOFs) with semiconductor-like characteristics, highly porous structures and high design flexibility. These properties of MOFs allow more efficient and effective mass transport as well as exposure to light.in this paper, using MOF technology and benefiting from the characteristics of Fe3O4 nanoparticles as catalyst support for more efficient separation of catalyst, we have synthesized a novel composite. Our proposed photocatalyst demonstrates efficient harvest of light in all wavelengths from UV to visible to generate electron/hole pairs suitable for water splitting with a turnover frequency of 0.222 h-1 at ambient conditions without requiring any additives.

Versatility of copper-iron bimetallic nanoparticles fabricated using Hibiscus rosa-sinensis flower phytochemicals: various enzymes inhibition, antibiofilm effect, chromium reduction and dyes removal

Bimetallic nanoparticles (NPs) are considered superior in terms of stability and function with respect to its monometallic counterparts. Hence, in the present study Hibiscus rosa-sinensis flower extract was used to synthesis copper-iron bimetallic nanoparticles (HF-FCNPs). HF-FCNPs was characterized and its applications (biological and environmental) were determined. HF-FCNPs were spherical in shape with high percentage of copper inducted into the NPs. HF-FCNPs inhibited mammalian glucosidases [maltase (IC50: 548.71 ± 61.01 µg/mL), sucrase (IC50: 441.34 ± 36.03 µg/mL), isomaltase (IC50: 466.37 ± 27.09 µg/mL) and glucoamylase (IC50: 403.12 ± 14.03 µg/mL)], alpha-amylase (IC50: 16.27 ± 1.73 µg/mL) and acetylcholinesterase [AChE (IC50: 0.032 ± 0.004 µg/mL)] activities. HF-FCNPs showed competitive inhibition against AChE, maltase and sucrase activities; mixed inhibition against isomaltase and glucoamylase activities; whereas non-competitive inhibition against α-amylase activity. HF-FCNPs showed zone of inhibition of 16 ± 2 mm against S. mutans at 100 µg/mL concentration. HF-FCNPs inhibited biofilm formation of dental pathogen, S. mutans. SEM and confocal microscopy analysis revealed the disruption of network formation and bacterial cell death induced by HF-FCNPs treatment on tooth model of S. mutans biofilm. HF-FCNPs efficiently removed hexavalent chromium in pH-independent manner and followed first order kinetics. Through Langmuir isotherm fit the qmax (maximum adsorption capacity) was determined to be 62.5 mg/g. Further, HF-FCNPs removed both anionic and cationic dyes. Altogether, facile synthesis of HF-FCNPs was accomplished and its biological (enzyme inhibition and antibiofilm activity) and environmental (catalyst to remove pollutants) applications have been understood.

Bi-doped BaBiO3 (x = 0%, 5%, 10%, 15%, and 20%) perovskite oxides by a sol-gel method: comprehensive biological assessment and RhB photodegradation

The BaBiO3 (BBO) perovskite oxide was prepared via a sol-gel method with different concentrations of Bi nitrate and examined as a photocatalyst for RhB degradation under sunlight, and its antioxidant and antibacterial activities were examined. X-ray diffraction (XRD) indicated the formation of a BaBiO3-BaCO3 (BBO-BCO) binary composite. For the degradation of RhB under solar radiation, high photocatalytic activity (73%) was observed. According to the antibacterial activity study, the addition of Bi enhanced the antibacterial activity of the resulting material against both Gram-positive and Gram-negative microorganisms. The Bi%-BBO (Bi 20%) inhibited 96.23% S. aureus. 10% Bi-BBO as an antioxidant agent had the most efficacious IC50 value of 2.50 mg mL-1. These results seem to suggest that BBO-BCO is a promising catalytic material with potential application in the fields of catalysis and medicine.

Structural, optical, morphological, sun-light driven photocatalytic and antimicrobial investigations of Ag2S and Cu/Ag2S nanoparticles

This study focusses on the preparation of silver sulphide (Ag2S) and Cu-doped Ag2S (Cu/Ag2S) nanoparticles (NPs) by sol-gel method and demonstrated their photocatalytic and antibacterial applications. The X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) analysis demonstrated that the prepared NPs are effectively crystallized in the polycrystalline single-phase monoclinic geometry of Ag2S. The optical bandgap is significantly reduced, and for both the sample the average grain size is observed to have narrowed from 42 nm to 23 nm. Both NPs were confirmed to be spherical nature as observed by scanning electron microscopy (SEM), and the energy dispersive X-ray (EDX) spectroscopy analysis validated the presence of all necessary components at the expected concentrations in the obtained samples. Under the irradiation of sunshine, the photocatalytic properties of each sample were investigated for their ability to facilitate the photodegradation of a hazardous methylene blue (MB) dye in an aqueous solution. Cu/Ag2S sample possesses a profound photocatalytic reaction for the destruction of MB dye. Furthermore, the Cu-doped Ag2S NPs suppress the proliferation of Staphylococcus aureus and Escherichia coli. In comparison to pure Ag2S NPs, Cu/Ag2S showed enhanced antibacterial activity against both the bacteria. Current study suggests that the Cu doped Ag2S NPs could be a promising material for wastewater treatment and antimicrobial agents.

Photocatalytic activity of TiO2-ZnO/g-C3N4 nanocomposites for methylene orange and Rhodamine B dyes removal from water and photocatalytic hydrogen generation

In this work, for the removal of azo dyes that cause environmental pollution, TiO2-ZnO has been modified with graphitic carbon nitride (g-C3N4) to form an advanced hetero-linked photocatalyst. With this catalyst, photocatalytic hydrogen production and photodegradation activity against methylene orange (MO) and rhodamineB (RhB) dye removal were studied. The synthesized nanostructure was extensively characterized by several techniques such as XRD, TEM, UV-Vis and fluorescence spectrophotometer (PL) techniques. According to the analysis, a significant increase in the photocatalytic efficiency of TiO2-ZnO was determined after it was modified with g-C3N4 nanostructures. The combination between TiO2-ZnO and g-C3N4 was shown to be responsible for the improvement in photocatalytic activity because it significantly decreased electron-hole recombination. After 90 min the 62.81% of MO dye was removed but at 120 min only 57% of RhB was degraded. In addition, the antibacterial activity of TiO2-ZnO/g-C3N4 catalyst was carried out against gram positive and gram negatif bacteria. The bacterial inhibition (%) of TiO2-ZnO/g-C3N4 catalyst.was found to be 44 % against E. coli and 33 % against at 100 μg/ml concentration. In line with the analyzes obtained with this study, important results have been revealed for the application of photocatalytic methods in more industrial dimensions in the production of hydrogen, which is a valuable energy type.

Enhanced photocatalytic performance of auto-combusted nanoparticles for photocatalytic degradation of azo dye under sunlight illumination and hydrogen fuel production

In this study, an innovative nanomaterial was synthesized for hydrogen production from methanolysis on sodium borohydride (NaBH₄) in order to be a solution for future energy problems. The nanocomposite containing FeCo, which does not contain noble metals, and whose support material is Polyvinylpyrrolidone (PVP), was synthesized by means of a thermal method. TEM, XRD and FTIR characterization methods were used for the analysis of the morphological and chemical structure of the nanocomposite. Nanocomposite particle size was 2.59 nm according to XRD and 5.45 nm according to TEM analysis for scale of 50 nm. For catalytic properties of nanomaterial in the methanolysis reaction of NaBH₄, temperature, catalyst, substrate, and reusability experiments were carried out and kinetic calculations were obtained. Among the activation parameters of FeCo@PVP nanoparticles, turnover frequency, enthalpy, entropy and activation energy were calculated as 3858.9 min^-1, 29.39 kJ/mol, -139.7 J/mol.K, and 31.93 kJ/mol, respectively. As a result of the reusability test of the obtained FeCo@PVP nanoparticles catalysts, which was carried out for 4 cycles, the catalytic activity was 77%. Catalytic activity results are given in comparison with the literature. In addition, the photocatalytic activity of FeCo@PVP NPs was evaluated against MB azo dye under solar light irradiation for 75 min and was found to be as 94%.

Bimetallic Biogenic Pt-Ag Nanoparticle and Their Application for Electrochemical Dopamine Sensor

In this study, Silver-Platinum (Pt-Ag) bimetallic nanoparticles were synthesized by the biogenic reduction method using plant extracts. This reduction method offers a highly innovative model for obtaining nanostructures using fewer chemicals. According to this method, a structure with an ideal size of 2.31 nm was obtained according to the Transmission Electron Microscopy (TEM) result. The Pt-Ag bimetallic nanoparticles were characterized using Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffractometry (XRD), and Ultraviolet-Visible (UV-VIS) spectroscopy. For the electrochemical activity of the obtained nanoparticles in the dopamine sensor, electrochemical measurements were made with the Cyclic Voltammetry (CV) and Differential Pulse Voltammetry (DPV) methods. According to the results of the CV measurements taken, the limit of detection (LOD) was 0.03 µM and the limit of quantification (LOQ) was 0.11 µM. To investigate the antibacterial properties of the obtained Pt-Ag NPs, their antibacterial effects on Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria were investigated. In this study, it was observed that Pt-Ag NPs, which were successfully synthesized by biogenic synthesis using plant extract, exhibited high electrocatalytic performance and good antibacterial properties in the determination of dopamine (DA).

Synthesis of cuttlebone/ carbon quantum dots/nickel oxide nanocomposite for visible light photodegradation of malachite green used for environmental remediation

In recent years, the development of light-driven nanophotocatalysts has focused on efficiently eliminating organic pollutants. In this regard, the present work focuses on the photocatalytic removal of malachite green (MG) dye using cuttlebone powder (CB) modified with carbon quantum dots (CQDs)/nickel oxide (NiO) under visible light irradiation. Various techniques were used to characterize the proposed composite, including X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) images. The optical properties of the synthesized CB/CQDs/NiO were analyzed by UV-VIS visible spectroscopy. Using central composite design (CCD), several effective parameters, including pH, dye concentration, amount of photocatalyst, and temperature degradation efficiency, were optimized to achieve the optimal condition for photocatalytic activity of CB/CQDs/NiO. The Langmuir-Hinshelwood model was employed to model the kinetics of the degradation of the dye, the resulting K being 0.378 min^-1. The as synthesized nanocomposites could be efficiently removed from water by applying an external magnetic field. The test results indicate that the prepared CB/CQDs/NiO nanocomposite demonstrates excellent stability after four reaction cycles. Furthermore, the nanocomposite shows excellent photocatalytic activity, reducing 99.7% MGdye concentration within 12 min of visible light exposure.

Radial Nano-Heterojunctions Consisting of CdS Nanorods Wrapped by 2D CN:PDI Polymer with Deep HOMO for Photo-Oxidative Water Splitting, Dye Degradation and Alcohol Oxidation

Solar energy harvesting using semiconductor photocatalysis offers an enticing solution to two of the biggest societal challenges, energy scarcity and environmental pollution. After decades of effort, no photocatalyst exists which can simultaneously meet the demand for excellent absorption, high quantum efficiency and photochemical resilience/durability. While CdS is an excellent photocatalyst for hydrogen evolution, pollutant degradation and organic synthesis, photocorrosion of CdS leads to the deactivation of the catalyst. Surface passivation of CdS with 2D graphitic carbon nitrides (CN) such as g-C₃N₄ and C₃N₅ has been shown to mitigate the photocorrosion problem but the poor oxidizing power of photogenerated holes in CN limits the utility of this approach for photooxidation reactions. We report the synthesis of exfoliated 2D nanosheets of a modified carbon nitride constituted of tris-s-triazine (C₆N₇) linked pyromellitic dianhydride polydiimide (CN:PDI) with a deep oxidative highest occupied molecular orbital (HOMO) position, which ensures sufficient oxidizing power for photogenerated holes in CN. The heterojunction formed by the wrapping of mono-/few layered CN:PDI on CdS nanorods (CdS/CN:PDI) was determined to be an excellent photocatalyst for oxidation reactions including photoelectrochemical water splitting, dye decolorization and the photocatalytic conversion of benzyl alcohol to benzaldehyde. Extensive structural characterization using HR-TEM, Raman, XPS, etc., confirmed wrapping of few-layered CN:PDI on CdS nanorods. The increased photoactivity in CdS/CN:PDI catalyst was ascribed to facile electron transfer from CdS to CN:PDI in comparison to CdS/g-C₃N₄, leading to an increased electron density on the surface of the photocatalyst to drive chemical reactions.