Insights into relationships between polycyclic aromatic hydrocarbon concentration, bacterial communities and organic matter composition in coal gangue site

Effects of the combined use of lanthanum carbonate and activated carbon capping materials on phosphorus and dissolved organic matter in lake sediments

Lanthanum carbonate (LC) represents a novel material for the immobilization of internal phosphorus (P) in sediments. Activated carbon (AC) is a traditional adsorbent that has been employed in the remediation of sediments on a wide scale. The objective of this study is to examine the mechanisms and effects of the combined use of LC and AC capping materials on the immobilization of P and dissolved organic matter (DOM) in sediments, through a 90-day incubation experiment. The results of isotherm experiments showed that the adsorption mechanism of P on LC and AC was mainly chemisorption. The XPS analyses showed the adsorption mechanism of P on LC was mainly ligand exchange and inner-sphere complexation; while the adsorption mechanism of P on AC was mainly ligand exchange and electrostatic adsorption. The results demonstrated that the concentrations of soluble reactive phosphorus (SRP) and DOM in the 0 to -100 mm sediment layer were reduced by 69.79% and 33.93%, respectively, in comparison to the control group with the LC + AC group. Moreover, the HCl-P and Res-P (stable P) in the 0-5 cm sediment layer were increased by 50.07% and 21.04%, respectively, in the LC + AC group. This indicates that the combined application of LC and AC has the potential to reduce the risk of P release. Furthermore, the formation of Fe(III)/Mn(IV) oxyhydroxides by LC + AC treatment resulted in an increased adsorption of SRP and DOM. Moreover, the effect of LC + AC capping on microbial community was smaller than that of LC/AC capping alone. The findings of this study indicated that the combined use of LC and AC represents a novel approach to the effective treatment of internal P and DOM in eutrophic lake sediments.

Interaction of heavy metals and polycyclic aromatic hydrocarbons in soil-crop systems: The effects and mechanisms

In natural environments, the removal and degradation of two major pollutants, heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs), are explored through targeted experimental investigations. However, these endeavors reveal that outcomes in situ may significantly diverge from the idealized effects observed in laboratory settings due to the complex interaction between HMs and PAHs, underscoring a pressing need for thorough research into their mutual impacts. This review examines the origins and migratory pathways of compound pollution stemming from HMs and PAHs. Concurrently, it provides an overview of the farmland ecosystem's response to combined HMs-PAHs pollution. This encompassed the assessments of changes in the soil's physical and chemical properties, the intricacies of the migration and transformation processes of the combined pollution within plants, and the consequential impact on the physiological functions of soil microorganisms. The varying concentration ratios of HMs and PAHs can modulate the permeability of plant root cell membranes, thereby influencing the translocation of these substances within the plant via symplastic and apoplastic pathways. Recent research has uncovered the mechanisms underlying cation-π interactions between HMs and PAHs. This review aims to offer a comprehensive overview of the current state of HMs-PAHs co-pollution, offering both qualitative and quantitative insights into their interaction patterns within the farmland ecosystem. The ultimate goal is to establish a robust theoretical foundation to support the in-situ remediation of these pollutants in agricultural practices and to provide a theoretical basis for soil health management in agricultural production.

Machine learning models reveal how polycyclic aromatic hydrocarbons influence environmental bacterial communities

Polycyclic aromatic hydrocarbons (PAHs) are harmful and widespread pollutants in the environment, posing an ecological threat. However, exploring the influence of PAHs on environmental bacterial communities in different habitats (soil, water, and sediment) remains a major challenge. We collected and reanalyzed 1924 16S rRNA sequencing samples to determine the effects of PAHs on bacterial communities in different habitats and used machine learning to predict potential degrading bacteria. It was found that PAHs had substantial effects on the bacterial community, and that the bacterial community structure changed differently in different habitats. PAH contamination decreased the relative abundance of Proteobacteria in the soil (16.3 %) and sediment (10.1 %), whereas the abundance of Proteobacteria in water increased by 20.2 %. Among the tested models, the random forest model best identified the effects of PAHs on bacterial groups, with an accuracy of 99.51 % for soil, 97.72 % for sediment, and 100 % for water at the genus level. Using the random forest model, we identified 70 biomarkers that respond to PAHs, including potentially degrading microorganisms such as A4b, Bacillus, Flavobacterium and Polynucleobacter. Furthermore, PAH contamination did not significantly alter the functions of bacterial communities in the environment. This study provides a candidate strain set for future screening of PAH-degrading bacteria and contributes to the study of the adaptability of engineered PAH-degrading bacteria to the environment.

Applying kitchen compost promoted soil chrysene degradation by optimizing microbial community structure

Chrysene, as a high molecular weight polycyclic aromatic hydrocarbon (PAH), has become an important factor in degrading soil quality and constraining the safe production of food crops. Compost has been widely used to amend contaminated soil. However, to date, the main components of kitchen compost that enhance the biodegradation of chrysene in the soil remain unidentified. Thus, in this study, the enhancing effect and mechanisms of kitchen compost (KC) and kitchen compost-derived dissolved organic matter (KCOM) on chrysene removal from soil were investigated through cultivation experiments combined with high-throughput sequencing technology. Additionally, the key components influencing the degradation of chrysene were identified. The results showed that KCOM was the main component of compost that promoted the degradation of chrysene. The average degradation rate of chrysene in 1% KC- and 1% KCOM-treated soil increased by 27.20% and 24.18%, respectively, at different levels of chrysene pollution compared with the control treatment (CK). KC and KCOM significantly increased soil nutrient content, accelerated humification of organic matter, and increased microbial activity in the chrysene-contaminated soil. Correlation analyses revealed that the application of KC and KCOM optimized the microbial community by altering soil properties and organic matter structure. This optimization enhanced the degradation of soil chrysene by increasing the abundance of chrysene-degrading functional bacteria from the genera Bacillus, Arthrobacter, Pseudomonas, Lysinibacillus, and Acinetobacter. This study provides insight into the identification of key components that promote chrysene degradation and into the microbial-enhanced remediation of chrysene-contaminated soil.

Opportunities, challenges and modification methods of coal gangue as a sustainable soil conditioner-a review

The persistent reliance on coal has resulted in the accumulation of substantial coal gangue, a globally recognized problematic solid waste with environmental risks. Given the coal gangue properties and global land degradation severity, the resourceful utilization of coal gangue as soil conditioners is believed to be a universally applicable, cost-effective, high-demand and environment-friendly model with broad application prospect. The direct application of raw coal gangue faces challenges of low active beneficial ingredients, inadequate water and fertilizer retention, presence of potentially toxic elements, resulting in limited efficacy and environmental contamination. This paper provided a comprehensive review of various modification methods (including mechanical, chemical, microbiological, thermal, hydrothermal and composite modifications) employed to enhance the soil improvement performance and reduce the environmental pollution of coal gangue. Furthermore, an analysis was conducted on the potential application of modified coal gangue as a muti-function soil conditioner based on its altered properties. The modified coal gangue is anticipated to effectively enhance soil quality, exhibiting significant potential in mitigating carbon emissions and facilitating soil carbon sequestration. This paper provided innovative ideas for future research on the comprehensive treatment of coal gangue and restoration of degraded soil in order to achieve the dual goals of zero-coal gangue waste and sustainable agriculture.

A 6-year review status on soil pollution in coal mining areas from Europe

Coal is an essential component in achieving the goal of fulfilling the energy demands of the world. Nevertheless, the extensive practice of coal mining has resulted in environmental contamination through the release of both organic and inorganic pollutants, including polycyclic aromatic compounds and potentially toxic elements, into various mediums, notably soil. The escalating coal-mining activities across Europe have amplified the concentration of specific elements in the soil. Therefore, a thorough and meticulous assessment of these environmental impacts is imperative to furnish policymakers, industries, and communities with valuable insights, facilitating the formulation and adoption of effective mitigation strategies. Considering the results of studies from 2018 to 2023, this review thoroughly evaluates the current state of soil pollution in the coal mining areas of Europe, focusing on polycyclic aromatic hydrocarbons and potentially toxic elements. By analyzing the acquired data, this study aims to evaluate the levels of contamination by these pollutants in soils. The findings reveal that low molecular weight polycyclic aromatic hydrocarbons dominate the polycyclic aromatic compounds present, while potentially toxic elements including Zn, Pb, Mn, and Cr emerge as major contributors to soil contamination in coal mining areas from Europe.

Exploring the Potential of Microbial Coalbed Methane for Sustainable Energy Development

By allowing coal to be converted by microorganisms into products like methane, hydrogen, methanol, ethanol, and other products, current coal deposits can be used effectively, cleanly, and sustainably. The intricacies of in situ microbial coal degradation must be understood in order to develop innovative energy production strategies and economically viable industrial microbial mining. This review covers various forms of conversion (such as the use of MECoM, which converts coal into hydrogen), stresses, and in situ use. There is ongoing discussion regarding the effectiveness of field-scale pilot testing when translated to commercial production. Assessing the applicability and long-term viability of MECoM technology will require addressing these knowledge gaps. Developing suitable nutrition plans and utilizing lab-generated data in the field are examples of this. Also, we recommend directions for future study to maximize methane production from coal. Microbial coal conversion technology needs to be successful in order to be resolved and to be a viable, sustainable energy source.

Metals and polycyclic aromatic hydrocarbons pollutants in industrial parks under valley landforms in Tibetan Plateau: Spatial pattern, ecological risk and interaction with soil microorganisms

The spatial patterns of pollutants produced by industrial parks are affected by many factors, but the interactions among polycyclic aromatic hydrocarbons (PAHs), metals, and soil microorganisms in the valley landforms of the Tibetan Plateau are poorly understood. Thus, this study systematically investigated the distribution and pollution of metals and PAHs in soil around an industrial park in the typical valley landform of the Tibetan Plateau and analyzed and clarified the interaction among metals, PAHs, and microorganisms. The results were as follows: metal and PAH concentrations were affected by wind direction, especially WN-ES and S-N winds; Cd (2.86-54.64 mg·kg-1) had the highest soil concentrations of the metals screened, followed by variable concentrations of Cu, Pb, and Zn; the pollution levels of metals and PAHs in the S-N wind direction were lower than those in the WN-ES wind direction; the Cd content of Avena sativa in the agricultural soil around the factory exceeded its enrichment ability and food safety standards; the closer to the center of the park, the higher the ecological risk of PAHs; and the TEQ and MEQ values of the PAHs were consistent with their concentration distributions. The results of the soil microbial diversity and co-occurrence network in the dominant wind direction showed that metal and PAH pollution weakened the robustness of soil microbial communities. Additionally, the diversity and robustness of soil microbial communities at the S wind site were higher than those at the ES wind site, which might be attributed to the lower metal content of the former than the latter, which plays a negative role in the biodegradation of PAHs. The results of this study provide insights into the site selection, pollutant supervision, and environmental remediation of industrial parks in typical landforms.

The combined effects of lanthanum-modified bentonite and Vallisneria spiralis on phosphorus, dissolved organic matter, and heavy metal(loid)s

The use of lanthanum-modified bentonite (LMB) combined with Vallisneria spiralis (V∙s) (LMB + V∙s) is a common method for controlling internal phosphorus (P) release from sediments. However, the behaviors of iron (Fe) and manganese (Mn) under LMB + V∙s treatments, as well as the associated coupling effect on P, dissolved organic matter (DOM), and heavy metal(loid)s (HMs), require further investigations. Therefore, we used in this study a microelectrode system and high-resolution dialysis technology (HR-Peeper) to study the combined effects of LMB and V∙s on P, DOM, and HMs through a 66-day incubation experiment. The LMB + V∙s treatment increased the sediment DO concentration, promoting in-situ formations of Fe (III)/Mn (IV) oxyhydroxides, which, in turn, adsorbed P, soluble tungsten (W), DOM, and HMs. The increase in the concentrations of HCl-P, amorphous and poorly crystalline (oxyhydr) oxides-bound W, and oxidizable HMs forms demonstrated the capacity of the LMB + V∙s treatment to transform mobile P, W, and other HMs forms into more stable forms. The significant positive correlations between SRP, soluble W, UV254, and soluble Fe (II)/Mn, and the increased concentrations of the oxidizable HMs forms suggested the crucial role of the Fe/Mn redox in controlling the release of SRP, DOM, and HMs from sediments. The LMB + V∙s treatment resulted in SRP, W, and DOM removal rates of 74.49, 78.58, and 54.78 %, which were higher than those observed in the control group (without LMB and V∙s applications). On the other hand, the single and combined uses of LMB and V·s influenced the relative abundances of the sediment microbial communities without exhibiting effects on microbial diversity. This study demonstrated the key role of combined LMB and V∙s applications in controlling the release of P, W, DOM, and HMs in eutrophic lakes.