Synthesis, characterization and reaction kinetics of PMMA/silver nanocomposites prepared via in situ radical polymerization

Different Polymers for the Base of Removable Dentures? Part II: A Narrative Review of the Dynamics of Microbial Plaque Formation on Dentures

This review focuses on the current disparities and gaps in research on the characteristics of the oral ecosystem of denture wearers, making a unique contribution to the literature on this topic. We aimed to synthesize the literature on the state of current knowledge concerning the biological behavior of the different polymers used in prosthetics. Whichever polymer is used in the composition of the prosthetic base (poly methyl methacrylate acrylic (PMMA), polyamide (PA), or polyether ether ketone (PEEK)), the simple presence of a removable prosthesis in the oral cavity can disturb the balance of the oral microbiota. This phenomenon is aggravated by poor oral hygiene, resulting in an increased microbial load coupled with the reduced salivation that is associated with older patients. In 15-70% of patients, this imbalance leads to the appearance of inflammation under the prosthesis (denture stomatitis, DS). DS is dependent on the equilibrium-as well as on the reciprocal, fragile, and constantly dynamic conditions-between the host and the microbiome in the oral cavity. Several local and general parameters contribute to this balance. Locally, the formation of microbial plaque on dentures (DMP) depends on the phenomena of adhesion, aggregation, and accumulation of microorganisms. To limit DMP, apart from oral and lifestyle hygiene, the prosthesis must be polished and regularly immersed in a disinfectant bath. It can also be covered with an insulating coating. In the long term, relining and maintenance of the prosthesis must also be established to control microbial proliferation. On the other hand, several general conditions specific to the host (aging; heredity; allergies; diseases such as diabetes mellitus or cardiovascular, respiratory, or digestive diseases; and immunodeficiencies) can make the management of DS difficult. Thus, the second part of this review addresses the complexity of the management of DMP depending on the polymer used. The methodology followed in this review comprised the formulation of a search strategy, definition of the inclusion and exclusion criteria, and selection of studies for analysis. The PubMed database was searched independently for pertinent studies. A total of 213 titles were retrieved from the electronic databases, and after applying the exclusion criteria, we selected 84 articles on the possible microbial interactions between the prosthesis and the oral environment, with a particular emphasis on Candida albicans.

Chemical characterization of silanized silver nanoparticles impregnated in poly (methyl methacrylate) resin: An in vitro study

Aim

The intention was to determine the chemical interaction of silanized AgNPs with PMMA by Fourier transform infrared (FTIR) spectroscopy.

Settings and Design

In-vitro comparative study.

Materials and Methods

This study is composed of four groups - 0.75% AgNP, 1.0% AgNP, 1.5% AgNP impregnated with PMMA, and nonimpregnated PMMA as control. The chemical nature of silanized AgNPs was studied using FTIR study.

Results

The results showed the appearance of new peak between 1727/cm and 1436/cm, i.e., 1636.476/ cm, 1645.886/cm, and 1646.885/cm, representing the C = C stretch in the experimental groups, i.e., 2, 3, and 4, respectively. This peak confirms that coupling agent has chemically interacted with PMMA.

Conclusion

It can be concluded that the AgNPs coated with the silane coupling agent TMSPM has chemically reacted with PMMA.

Investigation of improved optical and conductivity properties of poly(methyl methacrylate)–MXenes (PMMA–MXenes) nanocomposite thin films for optoelectronic applications

Polymer matrix composites composed of poly(methyl methacrylate) (PMMA) and MXenes (Ti3C2T x ) are synthesized using direct solution blending and casting techniques. MXenes are a new family of two-dimensional materials. Both optical and conductivity properties of the resulting PMMA-MXene nanocomposite thin films are studied as a function of MXene concentration, for the first time. The resulting thin films are in the micrometer range (8.10–8.80 µm) in thickness. As the concentration of MXenes increases, the PMMA embeds MXenes, causing structural disturbance but without any change in the crystal structure. The MXene thickness in single-layered structure is 15–20 nm. Optical investigations such as UV-Vis absorption, absorption coefficient, extinction coefficient, and band gap have been reported to study the light absorption of nanocomposites. Resistivity measurement associated with electrical conductivity is studied. The relationship between optical responses and electrical conductivity is discussed. When compared to pure PMMA (1 × 10−14 to 1 × 10−13 S m−1), nanocomposites have electrical conductivity that is more than 3,000 times higher. The nanocomposites containing 15 wt% MXenes had the highest conductivity of 1.35 × 10−3 S m−1. Both the conductivity improvement and tunable optical findings accelerate the route of integrating MXenes into polymers to create more promising multifunctional composites for optoelectronic applications such as conductive electrodes, thin film transistors, and logic circuits.

Antimicrobial Properties of Silver-Modified Denture Base Resins

The surface quality of denture base resins allows for easy colonization by microorganisms including Candida albicans and Staphylococcus aureus, which cause major diseases of the oral cavity such as denture stomatitis. The widespread use of silver nanoparticles (AgNPs) in various fields of medicine has led to research of their possible application in dentistry, mostly in the prevention of bacterial adhesion, proliferation, and biofilm formation. The aim of the study was to synthesize cold and heat-curing denture base resins modified with AgNPs and AgCl, and evaluate the potential of the modified resins to reduce the growth of C. albicans and S.aureus. The produced material was characterized by Fourier transform infrared spectroscopy (FTIR). The antimicrobial potential of the modified material was demonstrated by the disc-diffusion method, microdilution method, and a modified microdilution method (i.e., disk-diffusion method in broth with viable counting). Spectroscopy confirmed the incorporation of biocidal materials into the structure of the denture base resins. The AgCl and AgNPs modified resins showed an antimicrobial effect. The significance of the study is in the potential therapeutic effects of the modified materials for prevention and threating staphylococci and candida in elderly patients, who are in most cases denture wearers and have a greater susceptibility to develop opportunistic infections. Modified denture base resins can significantly reduce the presence of infection at the point of contact between the denture and the mucous membrane of the prosthetic restoration. Biological tests of modified denture base resins will follow.

Antibacterial Properties of PMMA Functionalized with CuFe2O4/Cu2O/CuO Nanoparticles

We have prepared a composite thin coating by incorporation of CuFe2O4/Cu2O/CuO nanoparticles in polymethyl methacrylate (PMMA) matrix by using the solution casting method. The electrical explosion of two twisted wires (EETW) was used to obtain multicomponent CuFe2O4/Cu2O/CuO nanoparticles with an average particle size of 20–70 nm. The microscopic studies showed that the nanoparticles in the composite coatings are evenly distributed. However, nanoparticles are strongly agglomerated as the powder concentration in the coating increases to 5 wt.% and 10 wt.%, as the size of particle agglomerates increases to 50 and 100 μm, respectively. Therefore, nanoparticles were pre-treated with ultrasound when introduced into the PMMA matrix. The thermal stability of the composite coating does not change with the introduction of CuFe2O4/Cu2O/CuO nanoparticles in the amount of 5 wt.%. The inclusion of nanoparticles in the PMMA matrix significantly enhances its antibacterial activity. The addition of 5 wt.% nanoparticles inhibited the growth of E. coli by 100% and the growth of MRSA by 99.94% compared to pure PMMA already after 3 h of exposure of bacteria on the surface of the composites. This research provides an easy-to-manufacture and cost-efficient method for producing a CuFe2O4/Cu2O/CuO/PMMA composite coating with a broad application as an antibacterial material.

Transparent, Flexible Plasmonic Ag NP/PMMA Substrates Using Chemically Patterned Ferroelectric Crystals for Detecting Pesticides on Curved Surfaces

Transparent and flexible surface-enhanced Raman scattering (SERS) substrates have attracted much interest for the detection of probe molecules on the curved surfaces of real samples, but a facile route to fabricate such substrates is still lacking. Herein, we present a rationally designed, high-performance flexible SERS substrate fabricated using a simple drop and peel-off technique for the ultrasensitive detection of pesticides. The proposed SERS substrate consists of a polymethyl methacrylate (PMMA) film anchored with plasmonic silver nanoparticles (Ag NPs), which are photoreduced using chemically patterned ferroelectric templates. The photoreduced Ag NPs extracted onto the PMMA film offer strong electromagnetic enhancement and produce intensive hotspots for the effective enhancement of the Raman signal. They provide superior SERS performance for the detection of parathion (PT) and fenitrothion (FNT) at trace-level concentrations of 10^-9 M and 10^-10 M with excellent enhancement factors in the order of 10⁸ and 10⁹, respectively. Moreover, the Ag NP/PMMA SERS substrate has good spot-to-spot uniformity and batch-to-batch reproducibility with the reservation of high detection sensitivity even after the mechanical deformation of bending and torsion up to 50 cycles. The multiplex detection ability is also investigated for the simultaneous detection of PT and FNT. To ensure the practical feasibility, the in-situ, real-time detection of PT and FNT on the curved surfaces of tomato and lemon using a fiber-coupled Raman probe is performed with limits of detection of 4.24 × 10^-8 M and 2.74 × 10^-9 M. The proposed Ag NP/PMMA flexible SERS substrate possesses unique features, such as easy fabrication through a simple, economical, rapid process, and facilitates straightforward implementation of in-situ SERS detection on curved fruit/vegetable surfaces.

Effect of Na- and Organo-Modified Montmorillonite/Essential Oil Nanohybrids on the Kinetics of the In Situ Radical Polymerization of Styrene

The great concern about the use of hazardous additives in food packaging materials has shown the way to new bio-based materials, such as nanoclays incorporating bioactive essential oils (EO). One of the still unresolved issues is the proper incorporation of these materials into a polymeric matrix. The in situ polymerization seems to be a promising technique, not requiring high temperatures or toxic solvents. Therefore, in this study, the bulk radical polymerization of styrene was investigated in the presence of sodium montmorillonite (NaMMT) and organo-modified montmorillonite (orgMMT) including thyme (TO), oregano (OO), and basil (BO) essential oil. It was found that the hydroxyl groups present in the main ingredients of TO and OO may participate in side retardation reactions leading to lower polymerization rates (measured gravimetrically by the variation of monomer conversion with time) accompanied by higher polymer average molecular weight (measured via GPC). The use of BO did not seem to affect significantly the polymerization kinetics and polymer MWD. These results were verified from independent experiments using model compounds, thymol, carvacrol and estragol instead of the clays. Partially intercalated structures were revealed from XRD scans. The glass transition temperature (from DSC) and the thermal stability (from TGA) of the nanocomposites formed were slightly increased from 95 to 98 °C and from 435 to 445 °C, respectively. Finally, better dispersion was observed when orgMMT was added instead of NaMMT.

A Facile Method for the Fabrication of Silver Nanoparticles Surface Decorated Polyvinyl Alcohol Electrospun Nanofibers and Controllable Antibacterial Activities

Polyvinyl alcohol (PVA) electrospun nanofibers (NFs) are ideal carriers for loading silver nanoparticles (Ag NPs) serving as antibacterial materials. However, it is still a challenge to adjust the particles size, distribution, and loading density via a convenient and facile method in order to obtain tunable structure and antimicrobial activities. In this study, Ag NPs surface decorated PVA composite nanofibers (Ag/PVA CNFs) were fabricated by the solvothermal method in ethylene glycol, which plays the roles of both reductant and solvent. The morphology and structure of the as-fabricated Ag/PVA CNFs were characterized by scanning electron microscopy, transmission electron microscopy, selected area electron diffraction, X-ray diffraction, UV-visible spectroscopy, and Fourier transform infrared spectroscopy. Ag NPs had an average diameter of 30 nm, the narrowest size distribution and the highest loading density were successfully decorated on the surfaces of PVA NFs, at the AgNO3 concentration of 0.066 mol/L. The antibacterial properties were evaluated by the methods of absorption, turbidity, and growth curves. The as-fabricated Ag/PVA hybrid CNFs exhibit excellent antimicrobial activities with antibacterial rates over 98%, especially for the sample prepared with AgNO3 concentration of 0.066 mol/L. Meanwhile, the antibacterial effects are more significant in the Gram-positive bacteria of Staphylococcus aureus (S. aureus) than the Gram-negative bacteria of Escherichia coli (E. coli), since PVA is more susceptive to S. aureus. In summary, the most important contribution of this paper is the discovery that the particles size, distribution, and loading density of Ag NPs on PVA NFs can be easily controlled by adjusting AgNO3 concentrations, which has a significant impact on the antibacterial activities of Ag/PVA CNFs.

Biocidal activity of curcumin and cationic polymer possessing composites

There is a growing interest in new type of biocidal compounds with antibacterial properties against bacteria. In this study, new antibacterial synthetic materials bearing curcumin and cationic polymers were synthesized. In the synthesis stage, the methacrylate functional cationic monomer was synthesized via the Michael addition route by using 3-acryloxy-2-hydroxypropyl methacrylate and 3-amino pyridine to obtain Monomer 1. Monomer 1 was further quaternized with hexyl bromide to obtain a cationic methacrylate functional monomer. Free-radical polymerization of Monomer 1 and methyl acrylate was conducted in the presence of azobisisobutyronitrile under dimethylformamide solvent. The composite formulation was conducted by using turmeric extract Curcuma longa (curcumin), hydroxyapatite, montmorillonite, and silver nitrate. The materials were analyzed by using the methods of X-ray diffraction, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and scanning electron microscopy. The biocidal activities against the bacteria Escherichia coli, Listeria monocytogenes, Salmonella, and Staphylococcus aureus were analyzed using agar well diffusion method. From the Fourier transform infrared, X-ray diffraction, and scanning electron microscopy analysis results of the synthesized nanocomposites, it is seen that they form strong connections with the components added to the composites and form an exfoliated structure. According to the antibacterial analysis results, the nanocomposites obtained have showed a strong antibacterial resistance against E.coli, L.monocytogenes, Salmonella, and S. aureus bacteria, and the high inhibition zone areas were obtained.

Antimicrobial Poly (methyl methacrylate) with Silver Nanoparticles for Dentistry: A Systematic Review

Poly(methyl methacrylate) (PMMA) is a widely used polymer for dental applications, and it is mainly used in the fabrication of dental prostheses. In an increasing number of these applications, the risk of suffering bacterial or fungal infection is higher than 60% among oral-prosthesis users. Some authors have reported the failure of other implants in the human body due to biofilm formation on the surface (mainly for total hip implants). In the dental field, the formation of bacterial and fungal biofilms on prosthesis’s surface is the etiologic factor for stomatitis, mainly caused by Candida albicans and bacteria such as Staphylococcus epidermidis, Staphylococcus aureus, Pseudomonas aeruginosa and Enterococcus faecalis, as well as many others. The antibacterial and antifungal properties of silver nanoparticles (AgNPs) have been widely reported, and their use in dental materials can prevent oral infections, such as candidiasis and stomatitis, and promote better oral health in dental-prosthesis users. They can even be used in other biomedical applications that require controlling biofilm formation on surfaces. In this review, the reported studies that use composites of PMMA and AgNPs (PMMA-AgNPs) for dental applications are listed and checked, with the aim of gaining a wider perspective of the use and application of this approach in the dental field.

A silver nanoparticle-poly(methyl methacrylate) based colorimetric sensor for the detection of hydrogen peroxide

A colorimetric sensor based on nanoparticles was developed for the detection of hydrogen peroxide. Nanoparticles were made using small sheets of poly(methyl methacrylate) (PMMA) and silver nitrate. The optical properties of the solution were characterized by spectrophotometer using the localized surface plasmon resonance (LSPR) phenomenon. The shape and size of the nanoparticles were obtained using a transmission electron microscope (TEM). Silver-poly(methyl methacrylate) nanoparticles solution (AgNP-PMMA) proved to be particularly sensitive to hydrogen peroxide compared to other analytes. This sensor provided a quick, practical and easy tool to detect hydrogen peroxide.

In situ dose dependent gamma ray irradiated synthesis of PMMA–Ag nanocomposite films for multifunctional applications

Herein we report a simple, one pot and rapid gamma-ray irradiation method for the fabrication of PMMA–Ag nanocomposite films for multifunctional applications.

Effect of Graphene Oxide on the Reaction Kinetics of Methyl Methacrylate In Situ Radical Polymerization via the Bulk or Solution Technique

The synthesis of nanocomposite materials based on poly(methyl methacrylate) and graphene oxide (GO) is presented using the in situ polymerization technique, starting from methyl methacrylate, graphite oxide, and an initiator, and carried out either with (solution) or without (bulk) in the presence of a suitable solvent. Reaction kinetics was followed gravimetrically and the appropriate characterization of the products took place using several experimental techniques. X-ray diffraction (XRD) data showed that graphite oxide had been transformed to graphene oxide during polymerization, whereas FTIR spectra revealed no significant interactions between the polymer matrix and GO. It appears that during polymerization, the initiator efficiency was reduced by the presence of GO, resulting in a reduction of the reaction rate and a slight increase in the average molecular weight of the polymer formed, measured by gel permeation chromatography (GPC), along with an increase in the glass transition temperature obtained from differential scanning calorimetry (DSC). The presence of the solvent results in the suppression of the gel-effect in the reaction rate curves, the synthesis of polymers with lower average molecular weights and polydispersities of the Molecular Weight Distribution, and lower glass transition temperatures. Finally, from thermogravimetric analysis (TG), it was verified that the presence of GO slightly enhances the thermal stability of the nano-hybrids formed.

Polymerization Kinetics of Poly(2-Hydroxyethyl Methacrylate) Hydrogels and Nanocomposite Materials

Hydrogels based on poly(2-hydroxyethyl methacrylate) (PHEMA) are a very important class of biomaterials with several applications mainly in tissue engineering and contacts lenses. Although the polymerization kinetics of HEMA have been investigated in the literature, the development of a model, accounting for both the chemical reaction mechanism and diffusion-controlled phenomena and valid over the whole conversion range, has not appeared so far. Moreover, research on the synthesis of nanocomposite materials based on a polymer matrix has grown rapidly recently because of the improved mechanical, thermal and physical properties provided by the polymer. In this framework, the objective of this research is two-fold: to provide a kinetic model for the polymerization of HEMA with accurate estimations of the kinetic and diffusional parameters employed and to investigate the effect of adding various types and amounts of nano-additives to the polymerization rate. In the first part, experimental data are provided from Differential Scanning Calorimetry (DSC) measurements on the variation of the reaction rate with time at several polymerization temperatures. These data are used to accurately evaluate the kinetic rate constants and diffusion-controlled parameters. In the second part, nanocomposites of PHEMA are formed, and the in situ bulk radical polymerization kinetics is investigated with DSC. It was found that the inclusion of nano-montmorillonite results in a slight enhancement of the polymerization rate, while the inverse holds when adding nano-silica. These results are interpreted in terms of noncovalent interactions, such as hydrogen bonding between the monomer and polymer or the nano-additive. X-Ray Diffraction (XRD) and Fourier Transform Infra-Red (FTIR) measurements were carried out to verify the results.

Pure titanium particle loaded nanocomposites: study on the polymer/filler interface and hMSC biocompatibility

The integration of inorganic nanoparticles into polymer matrices allows for the modification of physical properties as well as the implementation of new features for unexplored application fields. Here, we propose the study of a new metal/polymer nanocomposite fabricated by dispersing pure Ti nanoparticles into a poly(methylmetacrilate) matrix via solvent casting process, to investigate its potential use as new biomaterial for biomedical applications. We demonstrated that Ti nanoparticles embedded in the poly(methylmetacrilate) matrix can act as reinforcing agent, not negatively influencing the biological response of human mesenchymal stem cell in terms of cytotoxicity and cell viability. As a function of relative amount and surface treatment, Ti nanoparticles may enhance mechanical strength of the composite-ranging from 31.1 ± 2.5 to 43.7 ± 0.7 MPa-also contributing to biological response in terms of adhesion and proliferation mechanisms. In particular, for 1 wt% Ti, treated Ti nanoparticles improve cell materials recognition, as confirmed by higher cell spreading-quantified in terms of cell area via image analysis-locally promoting stronger interactions at cell matrix interface. At this stage, these preliminary results suggest a promising use of pure Ti nanoparticles as filler in polymer composites for biomedical applications.