Polycaprolactone-based scaffold for oil-selective sorption and improvement of bacteria activity for bioremediation of polluted water

A microbiome-biochar composite synergistically eliminates the environmental risks of antibiotic mixtures and their toxic byproducts

This study developed a continuous reactor system employing a hybrid hydrogel composite synthesized using a complex sludge microbiome and an adsorbent (HSA). This HSA-based system effectively eliminated the environmental risks associated with a mixture of the antibiotics ciprofloxacin and sulfamethoxazole, which exhibited higher toxicity in combination than individually at environmentally relevant levels. Analytical chemistry experiments revealed the in-situ generation of various byproducts (BPs) within the bioreactor system, with two of these BPs recording toxicity levels that surpassed those of their parent compound. The HSA approach successfully prevented the functional microbiome from being washed out of the reactor, while HSA efficiently removed antibiotic residues in their original and BP forms through synergistic adsorptive and biotransformation mechanisms, ultimately reducing the overall ecotoxicity. The use of HSA thus demonstrates promise not only as a mean to reduce the threat posed by toxic antibiotic residues to aquatic ecosystems but also as a practical solution to operational challenges, such as biomass loss/washout, that are frequently encountered in various environmental bioprocesses.

Advancements and Utilizations of Scaffolds in Tissue Engineering and Drug Delivery

The drug development process requires a thorough understanding of the scaffold and its three-dimensional structure. Scaffolding is a technique for tissue engineering and the formation of contemporary functioning tissues. Tissue engineering is sometimes referred to as regenerative medicine. They also ensure that drugs are delivered with precision. Information regarding scaffolding techniques, scaffolding kinds, and other relevant facts, such as 3D nanostructuring, are discussed in depth in this literature. They are specific and demonstrate localized action for a specific reason. Scaffold's acquisition nature and flexibility make it a new drug delivery technology with good availability and structural parameter management.

Electrospinning fabrication of magnetic nanoparticles-embedded polycaprolactone (PCL) sorbent with enhanced sorption capacity and recovery speed for spilled oil removal

The use of oil-soaked sorbents in the recovery and cleaning of oil spills presents challenges due to disposal. Recently, magnetic nanoparticle (MNP) based collection has been gaining interest as a new technique to lower the amount of labor required to treat oil spills. In this study, we devised a new method for the preparation of a magnetic nanoparticle (MNP) embedded polycaprolactone (PCL) sorbent with oleophilic and environmentally friendly features, capable of bring easily collected under a magnetic field. Compared with conventional polypropylene sorbents, the MNP embedded PCL sorbent (MNP/PCL) displayed excellent Arabian light (AL) crude oil sorption capacity (45.7 g g^-1) and decreased the absorption time of the oil-soaked sorbent due to its electrospun structure and efficient distribution of hydrophobic MNPs. Furthermore, the MNP/PCL based sorbent became fully pyrolyzed under certain temperatures and conditions. The MNP embedded PCL-based sorbent demonstrated broad applicability and utility in large scale oil spill projects.

Functional Nanohybrids and Nanocomposites Development for the Removal of Environmental Pollutants and Bioremediation

World population growth, with the consequent consumption of primary resources and production of waste, is progressively and seriously increasing the impact of anthropic activities on the environment and ecosystems. Environmental pollution deriving from anthropogenic activities is nowadays a serious problem that afflicts our planet and that cannot be neglected. In this regard, one of the most challenging tasks of the 21st century is to develop new eco-friendly, sustainable and economically-sound technologies to remediate the environment from pollutants. Nanotechnologies and new performing nanomaterials, thanks to their unique features, such as high surface area (surface/volume ratio), catalytic capacity, reactivity and easy functionalization to chemically modulate their properties, represent potential for the development of sustainable, advanced and innovative products/techniques for environmental (bio)remediation. This review discusses the most recent innovations of environmental recovery strategies of polluted areas based on different nanocomposites and nanohybrids with some examples of their use in combination with bioremediation techniques. In particular, attention is focused on eco-friendly and regenerable nano-solutions and their safe-by-design properties to support the latest research and innovation on sustainable strategies in the field of environmental (bio)remediation.

Emulsion templated scaffolds of poly(ε-caprolactone) - a review

The role of poly(ε-caprolactone) (PCL) and its 3D scaffolds in tissue engineering has already been established due to its ease of processing into long-term degradable implants and approval from the FDA. This review presents the role of high internal phase emulsion (HIPE) templating in the fabrication of PCL scaffolds, and the versatility of the technique along with challenges associated with it. Considering the huge potential of HIPE templating, which so far has mainly been focused on free radical polymerization of aqueous HIPEs, we provide a summary of how the technique has been expanded to non-aqueous HIPEs and other modes of polymerization such as ring-opening. The scope of coupling of HIPE templating with some of the advanced fabrication methods such as 3D printing or electrospinning is also explored.

Temporal dynamic of biofilms enhances the settlement of the central-Mediterranean reef-builder Dendropoma cristatum (Biondi, 1859)

Research on marine invertebrate settlement provides baseline knowledge for restoration technique implementation, especially for biogenic engineers with limited dispersion ability. Previously, we determined that the maturity of a biofilm strongly enhances the settlement of the vermetid reef-builder Dendropoma cristatum. To elucidate settlement-related biofilm features, here we analyse the structure and composition of marine biofilms over time, through microscopic observations, eukaryotic and prokaryotic fingerprinting analyses and 16S rDNA Illumina sequencing. The vermetid settlement temporal increase matched with the higher biofilm coverage on the substratum and the reduction of the eukaryotic abundance and diversity. The prokaryotic assemblage become, over time, more similar to that found on the reef-associated biofilm. Vermetids may detect these differences and selectively settle on those biofilms which show an advantageous structure and composition. These outcomes may support the production of ideal substrates for vermetid colonization and their further translocation to repopulate degraded reefs.

Physical and biological properties of electrospun poly(d,l-lactide)/nanoclay and poly(d,l-lactide)/nanosilica nanofibrous scaffold for bone tissue engineering

Electrospun scaffolds exhibiting high physical performances with the ability to support cell attachment and proliferation are attracting more and more scientific interest for tissue engineering applications. The inclusion of inorganic nanoparticles such as nanosilica and nanoclay into electrospun biopolymeric matrices can meet these challenging requirements. The silica and clay incorporation into polymeric nanofibers has been reported to enhance and improve the mechanical properties as well as the osteogenic properties of the scaffolds. In this work, for the first time, the physical and biological properties of polylactic acid (PLA) electrospun mats filled with different concentrations of nanosilica and nanoclay were evaluated and compared. The inclusion of the particles was evaluated through morphological investigations and Fourier transform infrared spectroscopy. The morphology of nanofibers was differently affected by the amount and kind of fillers and it was correlated to the viscosity of the polymeric suspensions. The wettability of the scaffolds, evaluated through wet contact angle measurements, slightly increased for both the nanocomposites. The crystallinity of the systems was investigated by differential scanning calorimetry highlighting the nucleating action of both nanosilica and nanoclay on PLA. Scaffolds were mechanically characterized with tensile tests to evaluate the reinforcing action of the fillers. Finally, cell culture assays with pre-osteoblastic cells were conducted on a selected composite scaffold in order to compare the cell proliferation and morphology with that of neat PLA scaffolds. Based on the results, we can convince that nanosilica and nanoclay can be both considered great potential fillers for electrospun systems engineered for bone tissue regeneration.

Superhydrophobic metal organic framework doped polycarbonate porous monolith for efficient selective removal oil from water

A series of superhydrophobic polycarbonate porous monoliths modified with metal organic framework (Z8/PC) were firstly fabricated through a facile thermally impacted non-solvent induced phase separation method for efficient selective oil/water separation. The performance of the monoliths on oil/water separation was evaluated in terms of selectivity, equilibrium adsorption capacity, corrosion resistance, kinetics, and circulation. The results showed that the use of ZIF-8 significantly compensated for the shortage of pure monolith. Compared with pure PC monolith, the hydrophobic angle of the Z8/PC-2 monolith promoted from 136.18° to 154.25° due to the micro-nano flower surface. Meanwhile, the Z8/PC-2 monolith displayed a more intricate and continuous interconnected 3D hierarchical micro-nano structure, which possessed the monolith a higher specific surface area of 146.84 m² g^-1 and porosity of 89.5%. What's more, more superior oil/water separation abilities of Z8/PC-2 monolith were manifested by the selective removal of oil or organic solvent from water within 30s, high equilibrium adsorption capacity, and excellent corrosion resistance. In addition, the ten-cycle regeneration of porous monoliths via centrifugation or evaporation displayed additional attractiveness. Therefore, porous Z8/PC monolith will be a promising candidate for the efficient selective oil/water separation of oil spills and organic solvents.

Innovative, ecofriendly biosorbent-biodegrading biofilms for bioremediation of oil- contaminated water

Immobilization of microorganisms capable of degrading specific contaminants significantly promotes bioremediation processes. In this study, innovative and ecofriendly biosorbent-biodegrading biofilms have been developed in order to remediate oil-contaminated water. This was achieved by immobilizing hydrocarbon-degrading gammaproteobacteria and actinobacteria on biodegradable oil-adsorbing carriers, based on polylactic acid and polycaprolactone electrospun membranes. High capacities for adhesion and proliferation of bacterial cells were observed by scanning electron microscopy. The bioremediation efficiency of the systems, tested on crude oil and quantified by gas chromatography, showed that immobilization increased hydrocarbon biodegradation by up to 23 % compared with free living bacteria. The resulting biosorbent biodegrading biofilms simultaneously adsorbed 100 % of spilled oil and biodegraded more than 66 % over 10 days, with limited environmental dispersion of cells. Biofilm-mediated bioremediation, using eco-friendly supports, is a low-cost, low-impact, versatile tool for bioremediation of aquatic systems.

Solid-state compounding of immiscible PCL-PEO blend powders for molding processes

Solid-state milling is a promising ecologically friendly method for fabricating polymeric blend and composite powder raw materials for several subsequent manufacturing processes. Biodegradable polymers, blends, and composites are expected to find extensive use by industry due to their environmental friendliness and acceptable mechanical and thermal properties for several applications. Poly-ε-caprolactone (PCL), poly-ethylene-oxide (PEO), and their blends have attracted so much attention to replace commodity polymers in future applications. Therefore, in the current research, bulk compounding of PCL-PEO blends with various compositions using solid-state cryomilling was investigated. Structural, mechanical, thermal, and hydrophilicity properties were examined on samples obtained by compression molding to explore the capabilities of the milling process for various applications. Morphology of the blends was explored by scanning electron microscopy (SEM), which showed a clear phase separation in blends after heating. Dispersed as well as co-continuous morphologies were achieved by varying composition. Differential scanning calorimetry (DSC) and x-ray diffraction (XRD) of the blends indicated insignificant amorphization by milling. Tensile strength, modulus, and percentage elongation at break of the blends demonstrated significant variations due to processing parameters.

PCL-Based Composite Scaffold Matrices for Tissue Engineering Applications

Biomaterial-based scaffolds are important cues in tissue engineering (TE) applications. Recent advances in TE have led to the development of suitable scaffold architecture for various tissue defects. In this narrative review on polycaprolactone (PCL), we have discussed in detail about the synthesis of PCL, various properties and most recent advances of using PCL and PCL blended with either natural or synthetic polymers and ceramic materials for TE applications. Further, various forms of PCL scaffolds such as porous, films and fibrous have been discussed along with the stem cells and their sources employed in various tissue repair strategies. Overall, the present review affords an insight into the properties and applications of PCL in various tissue engineering applications.

Isolation, characterization and determination of biotechnological potential of oil-degrading bacteria from Algerian centre coast

AIMS

The Algerian coastline is exposed to several types of pollution, including hydrocarbons. The aim of this work was to isolate oil-degrading bacteria and to explore the intrinsic bioremediation potential of part of its contaminated harbour.

METHODS AND RESULTS

A collection of 119 strains, capable to grow on mineral medium supplemented with hydrocarbons, were obtained from polluted sediment and seawater collected from Sidi Fredj harbour (Algiers). Twenty-three strains were selected for further studies. Sequencing of the 16S rRNA gene showed that most isolates belong to genera of hydrocarbonoclastic bacteria (Alcanivorax), generalist hydrocarbons degraders (Marinobacter, Pseudomonas, Gordonia, Halomonas, Erythrobacter and Brevibacterium) and other bacteria not known as hydrocarbon degraders (Xanthomarina) but were able to degrade hydrocarbons. Strains related to Marinobacter and Alcanivorax were frequently isolated from our samples and resulted the most effective in degrading crude oil. Screening of catabolic genes alkB and xylA revealed the presence of alkB gene in several bacterial strains; one isolate harboured both catabolic genes while other isolates carried none of the studied genes. However, they grew in the presence of crude oil implying the existence of other biodegradation pathways.

CONCLUSIONS

The samples of seawater and sediment from the Algerian coast contain high level of hydrocarbon-degrading bacteria that could be interesting and useful for future bioremediation purposes.

SIGNIFICANCE AND IMPACT OF THE STUDY

This investigation demonstrates the diversity of hydrocarbon-degrading bacteria from a marine-contaminated area in Algeria, and their variable biodegradation abilities.

Microbial communities of polluted sub-surface marine sediments

Microbial communities of coastal marine sediment play a key role in degradation of petroleum contaminants. Here the bacterial and archaeal communities of sub-surface sediments (5-10 cm) of the chronically polluted Priolo Bay (eastern coast of Sicily, Italy), contaminated mainly by n-alkanes and biodegraded/weathered oils, were characterized by cultural and molecular approaches. 16S-PCR-DGGE analysis at six stations, revealed that bacterial communities are highly divergent and display lower phylogenetic diversity than the surface sediment; sub-surface communities respond to oil supplementation in microcosms with a significant reduction in biodiversity and a shift in composition; they retain high biodegradation capacities and host hydrocarbon (HC) degraders that were isolated and identified. HC-degrading Alfa, Gamma and Epsilon proteobacteria together with Clostridia and Archaea are a common feature of sub-surface communities. These assemblages show similarities with that of subsurface petroleum reservoirs also characterized by the presence of biodegraded and weathered oils where anaerobic or microaerophilic syntrophic HC metabolism has been proposed.

Plasma modified PLA electrospun membranes for actinorhodin production intensification in Streptomyces coelicolor immobilized-cell cultivations

Most of industrially relevant bioproducts are produced by submerged cultivations of actinomycetes. The immobilization of these Gram-positive filamentous bacteria on suitable porous supports may prevent mycelial cell-cell aggregation and pellet formation which usually negatively affect actinomycete submerged cultivations, thus, resulting in an improved biosynthetic capability. In this work, electrospun polylactic acid (PLA) membranes, subjected or not to O₂-plasma treatment (PLA-plasma), were used as support for immobilized-cell submerged cultivations of Streptomyces coelicolor M145. This strain produces different bioactive compounds, including the blue-pigmented actinorhodin (ACT) and red-pigmented undecylprodigiosin (RED), and constitutes a model for the study of antibiotic-producing actinomycetes. Wet contact angles and X-ray photoelectron spectroscopy analysis confirmed the increased wettability of PLA-plasma due to the formation of polar functional groups such as carboxyl and hydroxyl moieties. Scanning electron microscope observations, carried out at different incubation times, revealed that S. coelicolor immobilized-cells created a dense "biofilm-like" mycelial network on both kinds of PLA membranes. Cultures of S. coelicolor immobilized-cells on PLA or PLA-plasma membranes produced higher biomass (between 1.5 and 2 fold) as well as higher levels of RED and ACT than planktonic cultures. In particular, cultures of immobilized-cells on PLA and PLA-plasma produced comparable levels of RED that were approximatively 4 and 5 fold higher than those produced by planktonic cultures, respectively. In contrast, levels of ACT produced by immobilized-cell cultures on PLA and PLA-plasma were different, being 5 and 10 fold higher than those of planktonic cultures, respectively. Therefore, this is study demonstrated the positive influence of PLA membrane on growth and secondary metabolite production in S. coelicolor and also revealed that O₂-plasma treated PLA membranes specifically promoted higher ACT production than not treated membranes.