Electron rich salen-AlCl catalysts as efficient initiators for the ring-opening polymerisation of rac-lactide

Switchable, chiral aluminium catalysts for ring opening polymerisations

A switchable, solvent-free catalytic system was developed in which Al methyl aminebis(phenolate) catalysts selectively initiate the formation of a polyether from cyclohexene oxide under CO2 atmosphere or the ring opening copolymerisation (ROCoP) of cyclohexene oxide and CO2 through the addition of a PPNCl (bis(triphenylphosphine)iminium chloride) cocatalyst to form poly(cyclohexene carbonate).

Aluminium complexes of phenoxy-azo ligands in the catalysis of rac-lactide polymerisation

Fourteen new phenoxy-azo aluminium complexes comprising two series, namely, dimethyl{phenoxy-azo}aluminium complexes 1a-7a and monomethyl{phenoxy-azo}aluminium complexes 1b-7b, were successfully synthesised and characterised. The molecular structure of complex 4a, determined using X-ray diffraction analysis, displayed a distorted tetrahedral geometry. The 1H NMR spectrum of complex 5b revealed fluxional behaviour caused by isomeric transformation that occurs in the solution at room temperature. The activation parameters determined by lineshape analysis of variable-temperature 1H NMR spectra in toluene-d8 are as follows: ΔH‡ = 70.05 ± 1.19 kJ mol-1, ΔS‡ = 21.78 ± 3.58 J mol-1 K-1 and ΔG‡ (298 K) = 63.56 ± 0.11 kJ mol-1. All aluminium complexes are active initiators for the ring-opening polymerisation of rac-lactide, and the polymerisations proceeded in a controlled manner and were living. In comparison, the catalytic activity of the dimethyl{phenoxy-azo}aluminium complexes was insignificantly different from that of the corresponding monomethyl{phenoxy-azo}aluminium complexes. The steric factor of the ortho-phenoxy substituent was observed to exert a decelerating effect on the catalytic rate. Kinetic investigations revealed first-order dependency on both monomer and initiator concentrations. Comparative catalytic investigations conducted on phenoxy-azo aluminium and phenoxy-imine aluminium complexes revealed that the former complexes exhibited lower catalytic activity.

Spiral gas-solid two-phase flow continuous mechanochemical synthesis of salophen complexes and catalytic thermal decomposition of ammonium perchlorate

Although mechanochemistry is increasingly becoming an alternative to traditional chemical synthesis, highly efficient continuous mechanochemical synthesis techniques are still rare. In this work, a novel spiral gas-solid two-phase flow (S-GSF) synthesis technique for the mechanochemical synthesis of salophen complexes has been reported, which is an approach for continuous synthesis based solely on airflow impacting the reaction. The synthesis of salophen-Br-Cu was used as a model reaction to optimize the reaction conditions, and three other salophen complexes, namely, salophen-Br-Co, salophen-Br-Ni, and salophen-Br-Zn were synthesized on this basis. The structure and thermal stability of the obtained products were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, UV-vis spectroscopy, nuclear magnetic resonance spectroscopy, scanning electron microscopy, and differential thermal analysis (DTA). The results showed that these complexes can be obtained continuously at a rate close to 4 g min-1, and the corresponding space-time yield is close to 1.2 × 105 kg m-3 day-1. In addition, DTA was used to analyze the catalytic performance of the complex for ammonium perchlorate (AP). The results showed that compared to the conditions for pure AP, salophen-Br-Co and salophen-Br-Cu could significantly reduce the high-temperature decomposition of AP pyrolysis to 77.0 and 102.1 °C, respectively. According to the method of Kissinger calculations, the Ea of AP decomposition decreased from 217.3 kJ mol-1 to 131.0 and 118.5 kJ mol-1, respectively. The TG data at different heating rates were analyzed using two isoconversion methods, i.e. Flynne-Walle-Ozawa (FWO) and Kissinger-Akahira-Sunose (KAS). The activation energies of AP, AP + 10 wt% salophen-Br-Co, and AP + 10 wt% salophen-Br-Cu were calculated. When the conversion degree (α) is between 0.1 and 0.9, the Ea values obtained from the two isoconversion methods are similar and exhibit certain matching. These two isoconversion methods also confirm Kissinger's calculations.

Phosphazene Functionalized Silsesquioxane-Based Porous Polymer as Thermally Stable and Reusable Catalyst for Bulk Ring-Opening Polymerization of ε-Caprolactone

The bulk ring-opening polymerization (ROP) of ε-caprolactone using phosphazene-containing porous polymeric material (HPCP) has been studied at high reaction temperatures (130-150 °C). HPCP in conjunction with benzyl alcohol as an initiator induced the living ROP of ε-caprolactone, affording polyesters with a controlled molecular weight up to 6000 g mol-1 and moderate polydispersity (Ð~1.5) under optimized conditions ([BnOH]/[CL] = 50; HPCP: 0.63 mM; 150 °C). Poly(ε-caprolactone)s with higher molecular weight (up to Mn = 14,000 g mol-1, Ð~1.9) were obtained at a lower temperature, at 130 °C. Due to its high thermal and chemical stability, HPCP can be reused for at least three consecutive cycles without a significant decrease in the catalyst efficiency. The tentative mechanism of the HPCP-catalyzed ROP of ε-caprolactone, the key stage of which consists of the activation of the initiator through the basic sites of the catalyst, was proposed.

Aluminum Salen Complexes Modified with Unsaturated Alcohol: Synthesis, Characterization, and Their Activity towards Ring-Opening Polymerization of ε-Caprolactone and D,L-Lactide

A highly efficient one-step approach to the macromonomer synthesis using modified aluminum complexes as catalysts of ring-opening polymerization (ROP) of ε-caprolactone and D,L-lactide was developed. The syntheses, structures, and catalytic activities of a wide range of aluminum salen complexes, 3a-c, functionalized with unsaturated alcohol (HO(CH₂)₄OCH=CH₂) are reported. X-Ray diffraction studies revealed a tetragonal pyramidal structure for 3c. Among the complexes 3a-c, the highest activity in bulk ROP of ε-caprolactone and D,L-lactide was displayed by 3b, affording polyesters with controlled molecular weights at low monomer to initiator ratios (M_n up to 15,000 g mol^-1), relatively high polydispersities (Ð~1.8) and high number-average functionalities (F_n up to 85%).

Mechanochemical synthesis of unsymmetrical salens for the preparation of Co-salen complexes and their evaluation as catalysts for the synthesis of α-aryloxy alcohols via asymmetric phenolic kinetic resolution of terminal epoxides

In this paper, we report the mechanochemical synthesis of unsymmetrical salens using grinding and ball milling technologies, respectively, both of which were afforded in good yield. The chelating effect of the unsymmetrical salens with zinc, copper, and cobalt was studied and the chiral Co-salen complex 2f was obtained in 98% yield. Hydrolytic kinetic resolution (HKR) of epichlorohydrin with water catalyzed by complex 2f (0.5 mol %) was explored and resulted in 98% ee, suggesting complex 2f could serve as an enantioselective catalyst for the asymmetric ring opening of terminal epoxides by phenols. A library of α-aryloxy alcohols 3 was thereafter synthesized in good yield and high ee using 2f via the phenolic KR of epichlorohydrin.

Metallocene catalysts for the ring-opening co-polymerisation of epoxides and cyclic anhydrides

The ring-opening co-polymerization (ROCOP) of epoxides and cyclic anhydrides is a versatile route to new polyesters. The vast number of monomers that are readily available means that an effectively limitless...

Highly heteroselective ring-opening polymerization of rac-lactide initiated by rare-earth alkoxides bearing chiral [NNOO]-type amine-bis(phenolate) ligands

A series of new monomeric rare-earth alkoxides (1-6) were successfully synthesized by one-pot reaction of chiral [NNOO]-type amine-bridged bis(phenolate) ligands ((S)-L1-4-H2), Ln[N(SiMe3)2]3 (Ln = Y, Sm, Nd) and 2-propanol in...

Combining high activity with broad monomer scope: indium salan catalysts in the ring-opening polymerization of various cyclic esters

An indium salan-type catalyst shows very high activities in the ring-opening polymerization of various cyclic esters, including β-butyrolactone, γ-butyrolactone, lactide, ε-caprolactone and ε-decalactone.

Towards a selective synthetic route for cobalt amino acid complexes and their application in ring opening polymerization of rac-lactide

Catalysts based on cobalt amino acids and 2,2 bipyridine (bipy) present an attractive and cost-effective alternative as ring opening polymerization catalysts, yet this system remains underexplored despite the advantageous coordination properties of amino acids and bipy as ligands combined with the variety of accessible oxidation states and coordination geometries of cobalt. Here, metal complexes of type [Co(aa)2(bipy)] with amino acids (aa: glycine, leucine and threonine) as ligands are reported. The complexes were characterized spectroscopically (IR, UV-vis and 1H, 13C NMR for diamagnetic species), and by MS spectrometry and elemental analysis. The data reveal that the 2,2 bipyridine acts as a neutral bidentate donor coordinating to the metal ion through two nitrogen atoms and the amino acid acts as a bidentate ligand coordinating through the carboxylate and amino group forming a stable five membered ring and a pseudo-octahedral geometry around the Co center. The activity of the complexes for the ring opening polymerization (ROP) of rac-lactide is presented. The complexes are effective initiators for the ROP of rac-lactide (K obs = 9.05 × 10-4 s-1) at 100 : 1 [rac-lactide] : [catalyst] 1 M overall concentration of lactide in toluene at 403 K.

Cooperative Heterometallic Catalysts for Lactide Ring-Opening Polymerization: Combining Aluminum with Divalent Metals

While homometallic (salen)Al catalysts display excellent performance in lactide ring-opening polymerization (ROP), heterometallic (salen)Al complexes have yet to be reported. Herein, we describe four heterobimetallic (salen)Al catalysts and show that the choice of the heterometal is key. Cooperative Al/Mg and Al/Zn combinations improved the catalyst activity by a factor of up to 11 compared to the mono-Al analogue, whereas the mono-Mg and mono-Zn analogues were completely inactive. In contrast, Al/Li and Al/Ca heterocombinations stunted the polymerization rate. Kinetic and computational studies suggest that Al/Mg and Al/Zn cooperativity arises from the close intermetallic proximity facilitating chloride bridging (thus enhancing initiation), which promotes a rigid square pyramidal geometry around the Al center and further increases the available monomer coordination sites. This work also translates the use of ab initio molecular dynamics calculations to ROP, introducing a useful method of investigating catalyst flexibility and revealing that ligand strain and molecular rigidity can enhance heterometallic catalyst performance.