Induced Membrane Technique (Masquelet) for Bone Defects in the Distal Tibia, Foot, and Ankle: Systematic Review, Case Presentations, Tips, and Techniques

The induced membrane technique for the management of infected segmental bone defects

Aims

The aim of the present study was to assess the outcomes of the induced membrane technique (IMT) for the management of infected segmental bone defects, and to analyze predictive factors associated with unfavourable outcomes.

Methods

Between May 2012 and December 2020, 203 patients with infected segmental bone defects treated with the IMT were enrolled. The digital medical records of these patients were retrospectively analyzed. Factors associated with unfavourable outcomes were identified through logistic regression analysis.

Results

Among the 203 enrolled patients, infection recurred in 27 patients (13.3%) after bone grafting. The union rate was 75.9% (154 patients) after second-stage surgery without additional procedures, and final union was achieved in 173 patients (85.2%) after second-stage surgery with or without additional procedures. The mean healing time was 9.3 months (3 to 37). Multivariate logistic regression analysis of 203 patients showed that the number (≥ two) of debridements (first stage) was an independent risk factor for infection recurrence and nonunion. Larger defect sizes were associated with higher odds of nonunion. After excluding 27 patients with infection recurrence, multivariate analysis of the remaining 176 patients suggested that intramedullary nail plus plate internal fixation, smoking, and an allograft-to-autograft ratio exceeding 1:3 adversely affected healing time.

Conclusion

The IMT is an effective method to achieve infection eradication and union in the management of infected segmental bone defects. Our study identified several risk factors associated with unfavourable outcomes. Some of these factors are modifiable, and the risk of adverse outcomes can be reduced by adopting targeted interventions or strategies. Surgeons can fully inform patients with non-modifiable risk factors preoperatively, and may even use other methods for bone defect reconstruction.

Antibiotic bone cement accelerates diabetic foot wound healing: Elucidating the role of ROCK1 protein expression

Clinical studies indicate antibiotic bone cement with propeller flaps improves diabetic foot wound repair and reduces amputation rates, but the molecular mechanisms, particularly key proteins' role remain largely unexplored. This study assessed the efficacy of antibiotic bone cement for treating diabetic foot wounds, focusing on molecular impact on ROCK1. Sixty patients were randomized into experimental (EXP, n = 40) and control (CON, n = 20) groups, treated with antibiotic bone cement and negative pressure. Wound healing rate, amputation rate, wound secretion culture and C-reactive protein (CRP) changes, were monitored. Comprehensive molecular investigations were conducted and animal experiments were performed to further validate the findings. Statistical methods were employed to verify significant differences between the groups and treatment outcomes. The EXP group showed significant improvements in wound healing (χ 2 $$ {\chi}^2 $$ = 11.265, p = 0.004) and reduced amputation rates. Elevated levels of ROCK1, fibroblasts and VGF were observed in the trauma tissue post-treatment in the experimental group compared to pre-treatment and the control group (all p < 0.05). Improved trauma secretion culture and CRP were also noted in the EXP group (all p < 0.05). The study suggests that antibiotic bone cement enhances diabetic foot wound healing, possibly via upregulation of ROCK1. Further research is needed to elucidate the underlying molecular mechanisms and broader clinical implications.

Custom-made total ankle arthroplasty with patient-specific instrumentation for severe bone loss conditions: a case series

PURPOSE

Management of bone loss around the ankle is a challenging condition. This retrospective study describes the design process, the surgical technique, and the preliminary results of custom-made total ankle arthroplasties (TAA) with patient-specific instrumentation (PSI) for different severe bone loss conditions.

METHODS

Consecutive patients that underwent custom-made TAA for severe bone loss conditions were included. The primary outcome was to describe the implant design in relation to the bone defect. Moreover, pre-operative and final follow-up clinical scores were compared.

RESULTS

Seven patients were included. Post-operative radiographs showed good correspondence between the pre-operative planning and the prosthesis alignment in all patients. Improvement in clinical scores was observed in all patients at the final follow-up. One patient developed a deep infection.

CONCLUSION

Short-term results reported herein are encouraging suggesting that custom-made TAA implants with PSI may represent an effective solution for ankle bone loss conditions.

The use of a 3D printed titanium implant for arthrodesis in the management of large osseous defects in the ankle

BACKGROUND

Large osseous defects (LOD) in the ankle occur because of multiple aetiologies. Advancement in 3-dimensional (3D) printing technologies has led to the use of custom implants and instrumentation their management. A 3D printed patient-specific porous titanium cage which allows for peripheral osteo-integration and autogenous bone-grafting could be an ideal implant in these cases.

METHODS

Retrospective review of a multi-centre, multi-surgeon consecutive cohort of patients requiring either TTC or AA for a large osseous defect between June 2019 - August 2020. A custom titanium prosthesis was 3D-printed according to CT measurements for implantation.

RESULTS

Mean follow up was 19.5 months (range 12-24 months). Plain radiographs and CT scans at 12 months confirmed osseointegration (stability) in 11of 13 patients (84%). Two patients developed late infection, one requiring revision surgery.

CONCLUSIONS

3D-Printed titanium implants in the management of LODs in the ankle offer a comparable success rate to other reported procedures, with unlimited geometric possibilities in the design allowing for accurate length correction. Their structural stability may offer an advantage over conventional bone graft techniques and limits the amount of bone-graft required.

LEVELS OF EVIDENCE

LOE III.

Treatment of infected bone defects with the induced membrane technique

Aims

This study aimed to evaluate the effectiveness of the induced membrane technique for treating infected bone defects, and to explore the factors that might affect patient outcomes.

Methods

A comprehensive search was performed in PubMed, Embase, and the Cochrane Central Register of Controlled Trials databases between 1 January 2000 and 31 October 2021. Studies with a minimum sample size of five patients with infected bone defects treated with the induced membrane technique were included. Factors associated with nonunion, infection recurrence, and additional procedures were identified using logistic regression analysis on individual patient data.

Results

After the screening, 44 studies were included with 1,079 patients and 1,083 segments of infected bone defects treated with the induced membrane technique. The mean defect size was 6.8 cm (0.5 to 30). After the index second stage procedure, 85% (797/942) of segments achieved union, and 92% (999/1,083) of segments achieved final healing. The multivariate analysis with data from 296 patients suggested that older age was associated with higher nonunion risk. Patients with external fixation in the second stage had a significantly higher risk of developing nonunion, increasing the need for additional procedures. The autografts harvested from the femur reamer-irrigator-aspirator increased nonunion, infection recurrence, and additional procedure rates.

Conclusion

The induced membrane technique is an effective technique for treating infected bone defects. Internal fixation during the second stage might effectively promote bone healing and reduce additional procedures without increasing infection recurrence. Future studies should standardize individual patient data prospectively to facilitate research on the affected patient outcomes.

Limb salvage and functional recovery in infected nonunion of the distal tibia treated with the Ilizarov techniques

Introduction

Treatment of infected nonunion of the distal juxta-articular tibia is a challenge due to a short distal fragment, deformity, thin soft-tissue envelope, and active infection. There is still no consensus on the approach that is able to maximally salvage the limb and ankle function.

Material and methods

Infected juxta-articular nonunion of the distal tibia was managed with two Ilizarov techniques, monofocal compression (MC) used in 12 patients and bifocal compression-distraction (BCD) in 6 patients. The choice of the technique depended on the size of the postresection defect, ≥3 cm or ≤3 cm, respectively. The tactics of functional approach were careful debridement, insertion of wires in the distal fragment so that they do not penetrate the ankle joint, stable fixation, and temporary bridging of the ankle and forefoot. MSCT was used along with regular radiography to assess the union and regeneration. Ankle functions were evaluated with AOFAS ankle-hindfoot score system.

Results

Bone consolidation, infection arrest and ankle function improvement were achieved in all patients. External fixation continued 221.7 ± 15.1 days for MC and 235 ± 25.8 days for BCD. Complications were wound divergence, wire-tract infection, premature consolidation of the fibula, and hypoplastic regeneration in one case. The mean functional AOFAS score after treatment was 90.7 ± 2.5 points in MC and 89.7 ± 1.3 in BCD patients. Residual limb discrepancy after MC ranged 0-4 cm. Bone shortening was compensated in BCD patients.

Conclusion

Limb-salvage and functional approach to the treatment of infected nonunion of the juxta-articular distal tibia with the Ilizarov techniques achieves good outcomes. It provides bone infection arrest, consolidation, defect compensation and significantly improves the ankle joint function.

Reconstruction of a Severe Open Tibiofibular Fracture using an Ipsilateral Vascularized Fractured Fibula with a Thoracodorsal Artery Perforator Free Flap

The Gustilo IIIB tibiofibular fractures often result in long bone loss and extensive soft tissue defects. Reconstruction of these complex wounds is very challenging, especially when it includes long bone grafts, because the donor site is limited. We describe our experience using a set of chimeric ipsilateral vascularized fibula grafts with a thoracodorsal artery perforator free flap to reconstruct the traumatic tibia defects. A 66-year-old male suffered a severe comminuted tibia fracture and segmented fibula fracture with large soft tissue defects as a result of a traffic accident. He also had an open calcaneal fracture with soft tissue defects on the ipsilateral side. All the main vessels of the lower extremity were intact, and the cortical bone defect of the tibia was almost as large as the fractured fibula segment. We used an ipsilateral vascularized fibula graft to reconstruct the tibia and a thoracodorsal artery perforator flap to resurface the soft tissue, using the distal ends of peroneal vessels as named into sequential chimeric flaps. After 3 weeks, the calcaneal defect was reconstructed with second thoracodorsal artery perforator free flap. Reconstruction was successful and allowed rapid rehabilitation because of reduced donor site morbidity.

The use of 3D printing technology in limb reconstruction. Inspirations and challenges

The management of septic non-unions with associated bone necrosis is challenging, especially when the resulting bone defect after the debridement is extensile. Different techniques have been described in the literature for the treatment of these demanding cases, with the most prominent being free vascularized Fibular graft and bone transport with distraction osteogenesis principles. Recently, 3D printing technology has been increasingly utilized in many complex orthopaedic pathologies. However, the application of those advancements regarding septic non-unions with residual bone defect has not been previously studied. This study presents a novel 3D printing technique for the management of an infected critical bone deficit of the tibia. Queries, challenges and future perspectives concerning the recruiting of 3D printing technology in limb reconstruction are also being discussed. Clinical Evidence Level: IV.

Bone defect reconstruction using Masquelet technique for calcaneal chondroblastoma: a case report

Masquelet technique demonstrated superiority in reconstructing long bone defect after trauma or infection. However, reports in foot tumor were rare. A 24-year-old male diagnosed with calcaneal chondroblastoma who had a defect of calcaneal after intralesional curettage. We reconstructed the defect by Masquelet technique. This is the first case as far as we know that reported Masquelet technique for calcaneal tumor. The technique to treat irregular bone defects after operation can be considered in other similar situations.

Effect of Tricalcium Phosphate on Healing of Non-Unions: An Observational Study of over 400 Non-Unions

Purpose

A central aspect of the treatment of non-unions is the filling of bone defects. The quantity of available autologous bone for this purpose is limited. Alternatively, or additionally, bone substitutes may be used. The aim of this retrospective, single-center study including 404 non-unions in 393 patients is to investigate the effect of tricalcium phosphate (TCP) on the healing of non-unions. Furthermore, the influence of gender, age, smoking status, comorbidities, type of surgical procedure, presence of infection, and length of treatment was investigated.

Methods

We evaluated three groups of patients. Group 1 received TCP + BG, group 2 received BG alone and group 3 received no augmentation. Bone stability was assessed 1 and 2 years after non-union revision surgery through analysis of radiographs using the Lane Sandhu Score. Scores ≥3 were rated as stable Other influencing factors were collected from the electronic medical record.

Results

In 224 non-unions, bone defects were filled with autologous bone and TCP (TCP+BG). In 137 non-unions, bone defects were filled with autologous bone (BG), and in 43 non-unions presenting non-relevant defects, neither autologous bone nor TCP were used (NBG). After 2 years, 72.7% of the TCP+BG patients, 90.1% of the BG patients and 84.4% of the NBG patients achieved a consolidation score ≥3. Advanced age, presence of comorbidities and longer treatment period had a significantly negative effect on consolidation 1 year after surgery. Longer treatment periods also showed a negative significant effect after 2 years. It is notable that larger defects, mainly treated with the combination of autologous bone and TCP, showed similar healing rates to that of smaller defects after 2 years.

Conclusion

The combination of TCP and autologous bone-grafts shows good results in the reconstruction of complicated bone-defects, but patience is required since the healing period exceeds 1 year in most patients.

Induced Membrane Technique for the Management of Segmental Femoral Defects: A Systematic Review and Meta-Analysis of Individual Participant Data

Several modifications of the induced membrane technique (IMT) have been reported, but there is no consensus regarding their results and prognosis. Moreover, most studies have focused on tibial defects; no meta-analysis of the treatment of femoral defects using the IMT has been reported. This systematic review and meta-analysis aimed to identify the potential risk factors of post-procedural complications following the treatment of segmental femoral defects using the IMT. A comprehensive search was performed on the Cochrane Library, EBSCO, EMBASE, Ovid, PubMed, Scopus, and Web of Science databases, using the keywords "femur," "Masquelet technique," and "induced membrane technique." Original articles composed in English, having accessible individual patient data, and reporting more than two cases of bony defect or nonunion of femur or more than five cases of any body part were included. Post-procedural bone graft infections, final union status, and union time after second-stage operation were analyzed. Fourteen reports, including 90 patients, were used in this study. External fixation in second-stage surgery had an odds ratio of 9.267 for post-procedural bone graft infection (p = 0.047). The odds ratio of post-procedural bone graft infection and age >65 years for final non-union status was 51.05 (p = 0.003) and 9.18 (p = 0.042). Shorter union time was related to impregnated antibiotics in the spacer (p = 0.005), transplanting all-autologous grafts (p = 0.042), and the application of intramedullary nails as the second-stage fixation method (p = 0.050). The IMT appears to be reasonable and reproducible for femoral segmental bone defects. Several preoperative and surgical factors may affect post-procedural complications and union time.

Construction of adipose tissue using a silica expander capsule and cell sheet-assembled of decellularized adipose tissue

Delayed neovascularization and unstable adipose formation are major confounding factors in adipose tissue engineering. A system using decellularized adipose tissue (DAT), adipose-derived stem cells (ADSCs), and human umbilical vein endothelial cells (HUVECs) has been preliminarily studied, but it requires optimization, as adipogenic and angiogenic capabilities for maintaining a stable construct shape are limited. The current study aimed to address these limitations. Our initial modification involved the addition of exogenous chemokine (C-C motif) ligand 2 (CCL2), which resulted in enhanced adipogenesis and angiogenesis. However, further improvement was required due to delayed blood recanalization. To further optimize the system, a vascularized fibrous capsule derived from an implanted silica expander was utilized as a second modification. We hypothesized this would function as both a microbioreactor to fix the seed cells and exogenous CCL2 locally and as a vascular bed to promote neovascularization. Compared with that of the CCL2 loaded ADSC-HUVECs cell sheet assembled DAT system, adding the silica expander capsule resulted in significantly increased construct stability, new vessel intensity, a greater number of Oil Red O-positive lipid droplets, more enhanced tissue remodeling, and upregulated peroxisome proliferator-activated receptor gamma (PPARγ) & leptin expression. Thus, these two modifications helped optimize the currently available ADSC-HUVEC cell sheet assembled DAT system, providing an adipose tissue construction strategy with enhanced adipogenesis and angiogenesis to reconstruct soft tissue defects. Moreover, close-to-normal leptin expression provided the engineered adipose tissue with a glucometabolic function, in addition to remodeling capabilities. STATEMENT OF SIGNIFICANCE: Delayed neovascularization and unstable adipose formation are the two major problems in tissue engineering adipose. Here, we introduced an adipose tissue engineering construction strategy using a silica expander capsule along with hADSCs-HUVECs cell sheet-assembled DAT in a CCL2-rich microenvironment. Our data suggested that CCL2 could improve angiogenesis and adipogenesis in vitro and in vivo. The addition of tissue expander capsule could further improve the stability of construction and fabricated adipose tissue with increased new vessel intensity, greater numbers of Oil Red O-positive lipid droplets, more enhanced tissue remodeling, and upregulated leptin expression. CCL2 and expander capsule can have clinical utility for soft tissue defects repair, and these two factors can be useful in other tissue engineering.

Skeletal regeneration for segmental bone loss: Vascularised grafts, analogues and surrogates

Massive segmental bone defects (SBD) are mostly treated by removing the fibula and transplanting it complete with blood supply. While revolutionary 50 years ago, this remains the standard treatment. This review considers different strategies to repair SBD and emerging potential replacements for this highly invasive procedure. Prior to the technical breakthrough of microsurgery, researchers in the 1960s and 1970s had begun to make considerable progress in developing non autologous routes to repairing SBD. While the breaktthrough of vascularised bone transplantation solved the immediate problem of a lack of reliable repair strategies, much of their prior work is still relevant today. We challenge the assumption that mimicry is necessary or likely to be successful and instead point to the utility of quite crude (from a materials technology perspective), approaches. Together there are quite compelling indications that the body can regenerate entire bone segments with few or no exogenous factors. This is important, as there is a limit to how expensive a bone repair can be and still be widely available to all patients since cost restraints within healthcare systems are not likely to diminish in the near future. STATEMENT OF SIGNIFICANCE: This review is significant because it is a multidisciplinary view of several surgeons and scientists as to what is driving improvement in segmental bone defect repair, why many approaches to date have not succeeded and why some quite basic approaches can be as effective as they are. While there are many reviews of the literature of grafting and bone repair the relative lack of substantial improvement and slow rate of progress in clinical translation is often overlooked and we seek to challenge the reader to consider the issue more broadly.

Men who stare at bone: multimodal monitoring of bone healing

Knowledge of the physiological and pathological processes, taking place in bone during fracture healing or defect regeneration, is essential in order to develop strategies to enhance bone healing under normal and critical conditions. Preclinical testing allows a wide range of imaging modalities that may be applied both simultaneously and longitudinally, which will in turn lower the number of animals needed to allow a comprehensive assessment of the healing process. This work provides an up-to-date review on morphological, functional, optical, biochemical, and biophysical imaging techniques including their advantages, disadvantages and potential for combining them in a multimodal and multiscale manner. The focus lies on preclinical testing of biomaterials modified with artificial extracellular matrices in various animal models to enhance bone remodeling and regeneration.