Impact of pectin type on the storage stability of black currant (Ribes nigrum L.) anthocyanins in pectic model solutions

Anthocyanins as Natural Food Colorings: The Chemistry Behind and Challenges Still Ahead

Anthocyanins are polyphenolic O-glycosides widely responsible for the bright red, purple, and blue colors in the plant kingdom, including a great variety of fruits and vegetables. Hence, they have attracted considerable scientific and industrial interest as potential natural food colorings. However, individual anthocyanins are intrinsically reactive molecules combining electrophilic, nucleophilic, and electron-donating properties. This reactivity may be not only a source of color diversity with, for instance, the formation of new pigments upon winemaking and storage but also a cause of great color instability involving a combination of reversible and irreversible mechanisms (e.g., water addition, autoxidation) leading to colorless products. Hence, using anthocyanin-rich plant extracts as food colorings requires a deep understanding of these color-damaging mechanisms and, no less importantly, of the color-stabilizing mechanisms developed by plants, including π-stacking interactions (self-association, copigmentation), metal binding, and a combination of both. The potential of anthocyanins from deeply colored vegetables, typically acylated by hydroxycinnamic acid residues, will be emphasized in that respect. Moreover, food-grade biopolymers (proteins, polysaccharides) may provide suitable matrices for ready-to-use formulations of anthocyanins as food colorings. In this short review, the mechanisms of color loss and color stabilization are discussed as a function of anthocyanin structure and environment, and some challenges still ahead are outlined.

Effect of ultrasonic modification on the binding ability of pectin to anthocyanin

BACKGROUND

Pectin was considered as a potential candidate to improve the thermal stability of anthocyanins, and the binding ability of pectin to anthocyanins was influenced by its structure. In this study, sunflower pectins, modified by ultrasound (40 kHz) for different periods of time, were prepared and used to bind with anthocyanins, extracted from purple sweet potato.

RESULTS

Characterization and thermal stability of pectin-anthocyanin complexes were investigated. The ultrasonic modification of pectin resulted in many changes in pectin chemical structure, including degradation of neutral sugar side chains, breakage of methoxyl groups, and increased molecular flexibility. Extension of ultrasonic modification time led to greater changes in pectin chemical structure. Analysis of the binding ability, as determined by Fourier transform infrared spectroscopy and molecular dynamics simulations, revealed that the interaction between pectin and anthocyanins was driven by hydrogen bonding, electrostatic interaction, and hydrophobic interaction. Pectins with different ultrasonic modification times bound with anthocyanins to different extents, mainly resulting from an increase in the number of hydrogen bonds. According to high-performance liquid chromatographic analysis, during heating at 90 °C the stronger the binding ability of pectin and anthocyanin complex, the better was its thermal stability.

CONCLUSION

Ultrasonic modification of pectin could effectively enhance its binding ability to anthocyanin. © 2023 Society of Chemical Industry.

Pelargonidin alleviates acrolein-induced inflammation in human umbilical vein endothelial cells by reducing COX-2 expression through the NF-κB pathway

Acrolein, a common environmental pollutant, is linked to the development of cardiovascular inflammatory diseases. Pelargonidin is a natural compound with anti-inflammation activity. In this study, we aimed to explore the effects of pelargonidin on inflammation induced by acrolein in human umbilical vein endothelial cells (HUVECs). MTT assay was utilized for assessing cell viability in HUVECs. LDH release in HUVECs was measured using the LDH kit. Western blot was used to detect the protein expression of p-p65, p65 and COX-2. Inflammation was evaluated through determining the levels of PGE2, IL-1β, IL-6, IL-8 and TNF-α in HUVECs after treatment. COX-2 mRNA expression and COX-2 content were examined using RT-qPCR and a human COX-2 ELISA kit, respectively. Acrolein treatment at 50 μM resulted in a 45% decrease in the viability and an increase in LDH release (2.2-fold) in HUVECs. Pelargonidin at 5, 10, 20, and 40 μM alleviated acrolein-caused inhibitory effect on cell viability (increased to 1.3-, 1.5-, 1.8-, and 1.9-fold, respectively, compared to acrolein treatment group) and promoting effect on LDH release (decreased to 82%, 75%, 62%, and 58%, respectively, compared to acrolein treatment group) in HUVECs. Moreover, pelargonidin or pyrrolidine dithiocarbamate (PDTC; an NF-κB pathway inhibitor) inhibited acrolein-induced activation of the NF-κB pathway. Acrolein elevated the levels of PGE2, IL-1β, IL-6, IL-8 and TNF-α (from 40.2, 27.3, 67.2, 29.0, 24.8 pg/mL in control group to 224.0, 167.3, 618.3, 104.6, and 275.1 pg/mL in acrolein treatment group, respectively), which were retarded after pelargonidin (decreased to 134.8, 82.3, 246.2, 70.2, and 120.8 pg/mL in acrolein + pelargonidin treatment group) or PDTC (decreased to 107.9, 80.1, 214.6, 64.0, and 96.6 pg/mL in acrolein + PDTC treatment group) treatment in HUVECs. Pelargonidin inactivated the NF-κB pathway to reduce acrolein-induced COX-2 expression. Furthermore, pelargonidin relieved acrolein-triggered inflammation through decreasing COX-2 expression by inactivating the NF-κB pathway in HUVECs. In conclusion, pelargonidin could protect against acrolein-triggered inflammation in HUVECs through attenuating COX-2 expression by inactivating the NF-κB pathway.

Comparison of an Ultrasound-Assisted Aqueous Two-Phase System Extraction of Anthocyanins from Pomegranate Pomaces by Utilizing the Artificial Neural Network-Genetic Algorithm and Response Surface Methodology Models

As a by-product of pomegranate processing, the recycling and reuse of pomegranate pomaces (PPs) were crucial to environmentally sustainable development. Ultrasound-assisted aqueous two-phase extraction (UA-ATPE) was applied to extract the anthocyanins (ACNs) from PPs in this study, and the central composite design response surface methodology (CCD-RSM) and artificial neural network-genetic algorithm (ANN-GA) models were utilized to optimize the extraction parameters and achieve the best yield. The results indicated that the ANN-GA model built for the ACN yield had a greater degree of fit and accuracy than the RSM model. The ideal model process parameters were optimized to have a liquid-solid ratio of 49.0 mL/g, an ethanol concentration of 28 g/100 g, an ultrasonic time of 27 min, and an ultrasonic power of 330 W, with a maximum value of 86.98% for the anticipated ACN yield. The experimental maximum value was 87.82%, which was within the 95% confidence interval. A total of six ACNs from PPs were identified by utilizing UHPLC-ESI-HRMS/MS, with the maximum content of cyanidin-3-O-glucoside being 57.01 ± 1.36 mg/g DW. Therefore, this study has positive significance for exploring the potential value of more by-products and obtaining good ecological and economic benefits in the future.

The structure of anthocyanins and the copigmentation by common micromolecular copigments: A review

Under natural physiological conditions, anthocyanins can keep bright and stable color for a long time due to the relatively stable acid-base environment of plant vacuoles and the copigmentation from various copigment substances, such as polyphenols, nucleotides, metallic ions and other substances. Therefore, the copigmentation caused by copigments is considered an effective way to stabilize anthocyanins against adverse environmental conditions. This is attributed to the covalent and noncovalent interactions between colored forms of anthocyanins (flavylium ions and quinoidal bases) and colorless or pale yellow organic molecules (copigments). These interactions are usually manifested in both hyperchromic effect and bathochromic shifts. In addition to making anthocyanins more stable, the copigmentation also could make an important contribution to the diversification of their tone. Based on the molecular structure of anthocyanins, this review focuses on the interaction mode of auxochrome groups or copigments with anthocyanins and their effects on the chemical and color stability of anthocyanins.

Intelligent active films of sodium alginate and konjac glucomannan mixed by Lycium ruthenicum anthocyanins and tea polyphenols for milk preservation and freshness monitoring

To achieve real-time monitoring of food freshness, a pH-responsive film based on sodium alginate-konjac glucomannan loaded with Lycium ruthenicum anthocyanins (LRA) was prepared, with the addition of tea polyphenols (TP) to enhance the stability of LRA. The surface structure of the films was observed by AFM. The results of FTIR and molecular docking simulation showed that LRA and TP were bound to polysaccharide by hydrogen bonds. The mechanical properties, barrier properties, and antioxidant/antibacterial properties of the films were significantly improved and the films showed obvious color response to pH. Notably, the AFM images showed TP and LRA could lead to more severe damage to the bacterial structure. The results of molecular docking simulation suggested that TP and LRA could act on different components of the bacterial cell wall, indicating their synergistic mechanism in antimicrobial activity. Moreover, the stability of LRA was improved due to the interactions of TP and polysaccharides with LRA. The aggregates formed by TP and LRA were clearly observed by AFM. Finally, the film showed excellent preservation and freshness monitoring effect in milk. In conclusion, TP-LRA-SA-KGM intelligent film exhibited excellent performance and represented a promising novel food packaging material with potential applications.

Effects of sunflower pectin on thermal stability of purple sweet potato anthocyanins at different pH

The present study aimed to examine the impact of sunflower pectin (SFP) on the thermal stability and antioxidant activity of purple sweet potato anthocyanins (PSPA) at varying pH levels. It was observed that the pH value significantly influenced the ability of pectin to protect anthocyanins from thermal degradation, which was found to be associated with the rate of binding between PSPA and SFP. The binding rate of PSPA-SFP was observed to be highest at pH 4.0, primarily due to the influence of electrostatic interaction and hydrogen bonding. Monoacylated anthocyanins exhibited a binding rate approximately 2-4 % higher than that of diacylated anthocyanins. The PSPA-SFP demonstrated its highest thermal stability at pH 4.0, with a corresponding half-life of 14.80 h at 100 °C. Molecular dynamics simulations indicated that pectin had a greater affinity for the flavylium cation and hemiketal form of anthocyanins. The antioxidant activity of anthocyanins in PSPA and PSPA-SFP increased with increasing pH, suggesting that anthocyanins at high pH had higher antioxidant activity than anthocyanins at low pH.

Research progress in extraction, purification, structure of fruit and vegetable polysaccharides and their interaction with anthocyanins/starch

Fruits and vegetables contain polysaccharides, polyphenols, antioxidant enzymes, and various vitamins, etc. Fruits and vegetables polysaccharides (FVPs), as an important functional factor in health food, have various biological activities such as lowering blood sugar, blood lipids, blood pressure, inhibiting tumors, and delaying aging, etc. In addition, FVPs exhibit good physicochemical properties including low toxicity, biodegradability, biocompatibility. Increasing research has confirmed that FVPs could enhance the stability and biological activities of anthocyanins, affecting their bioavailability to improve food quality. Simultaneously, the addition of FVPs in natural starch suspension could improve the physicochemical properties of natural starch such as viscosity, gelling property, water binding capacity, and lotion stability. Hence, FVPs are widely used in the modification of natural anthocyanins/starch. A systematic review of the latest research progress and future development prospects of FVPs is very necessary to better understand them. This paper systematically reviews the latest progress in the extraction, purification, structure, and analysis techniques of FVPs. Moreover, the review also introduces the potential mechanisms, evaluation methods, and applications of the interaction between polysaccharides and anthocyanins/starch. The findings can provide important references for the further in-depth development and utilization of FVPs.

Intermolecular binding of blueberry anthocyanins with water-soluble polysaccharides: Enhancing their thermostability and antioxidant abilities

This study investigated the protective effect of β-glucan (BG), konjac glucomannan (KGM) and xanthan gum (XG) on thermo-stability and antioxidant capacities of blueberry anthocyanins (ACN) and their interaction mechanisms. Twenty-six glycosylated and acylated ACN were identified, and malvidin-3-O-galactose was predominant (36.78 %) in ACN extracts. Three polysaccharides retained colour and stability and antioxidant capabilities of ACN under thermal-treatments (XG > KGM > BG). Rheological properties (shear stress, apparent viscosity) of three polysaccharides were enhanced in presence of ACN. UV-visible spectra, SEM and DLS results indicated that co-aggregation between ACN and specific zones of these polysaccharides was formed. TGA and DSC studies confirmed that introductionof three polysaccharides, especially XG could improve thermostability of ACN. FTIR, and molecular dynamics simulations revealed that thermo-stabilization of polysaccharides-ACN conjugates might be attributedto their intermolecular interactions mainly via hydrogen bindings. The protection by water-soluble polysaccharides foresees novel anthocyanins in food products with increased heat-resistant stability.

Complexation with Polysaccharides Enhances the Stability of Isolated Anthocyanins

Isolated anthocyanins have limited colonic bioavailability due to their instability as free forms. Thus, many methods have been fabricated to increase the stability of anthocyanins. Complexation, encapsulation, and co-pigmentation with other pigments, proteins, metal ions, and carbohydrates have been reported to improve the stability and bioavailability of anthocyanins. In this study, anthocyanins extracted from purple potatoes were complexed with four different polysaccharides and their mixture. The anthocyanin-polysaccharide complexes were characterized using a zeta potential analyzer, particle size analyzer, scanning electron microscopy, and Fourier-transform infrared spectroscopy. Complexes were subjected to simulated digestion for assessing the stability of anthocyanins. Furthermore, complexes were subjected to different pH conditions and incubated at high temperatures to monitor color changes. A Caco-2 cell monolayer was used to evaluate the colonic concentrations of anthocyanins. In addition, the bioactivity of complexes was assessed using LPS-treated Caco-2 cell monolayer. Results show that pectin had the best complexation capacity with anthocyanins. The surface morphology of the anthocyanin-pectin complex (APC) was changed after complexation. APC was more resistant to the simulated upper gastrointestinal digestion, and high pH and temperature conditions for a longer duration. Furthermore, APC restored the lipopolysaccharide (LPS)-induced high cell permeability compared to isolated anthocyanins. In conclusion, complexation with pectin increased the stability and colonic bioavailability and the activity of anthocyanins.

Exploring the influence of S. cerevisiae mannoproteins on wine astringency and color: Impact of their polysaccharide part

The impact of the polysaccharide moiety of mannoproteins (MPs) on the color and astringency of red wines was studied respectively through spectrophotometry and their impact on tannin interactions with BSA. To this end, MPs with conserved native structures from four different Saccharomyces cerevisiae strains were used: a Wild-Type strain (BY4742, WT) taken as reference, mutants ΔMnn4 (with no mannosyl-phosphorylation) and ΔMnn2 (linear N-glycosylation backbone), and a commercial enological strain. MPs affected tannin-BSA interactions by delaying aggregation kinetics. To achieve it, a well-balanced density/compactness of the polysaccharide moiety of MPs was a key factor. MP-WT and MP-Mnn2 acted as weak copigments and induced a slight increase in the absorbance of Malvidin-3-O-Glucoside. The same MPs also promoted a synergistic effect during the copigmentation of Quercetin-3-O-Glucoside with Malvidin-3-O-Glucoside. The intensity of these hyperchromic effects was related to the accessibility of anthocyanins to negatively charged mannosyl-phosphate groups within the polysaccharide moiety.

Computational design of a chitosan derivative for improving the color stability of anthocyanins: Theoretical calculation and experimental verification

The objective of this study was to design a chitosan (CS) derivative with good protective effect on the color stability of anthocyanins (ACNs) under accelerated storage. The binding affinities and interactions of 12 organic acids with cyanidin-3-O-glucoside (C3G) were evaluated using quantum mechanics method. Sinapic acid (SinA) showing the strongest interaction with C3G was selected for the synthesis of SinA-grafted-CS (SinA-g-CS), which was further characterized by FTIR and 1H NMR. Under accelerated storage conditions (40 °C), SinA-g-CS significantly improved the color stability of black rice anthocyanins (BRA) in the presence of l-ascorbic acid (pH 3.0), and showed a better protective effect than that of CS. Moreover, molecular dynamics simulation analysis showed SinA-g-CS formed more hydrogen bonds with C3G than CS. Our study demonstrated that SinA-g-CS designed by computational methods can effectively protect ACNs from degradation, and has the potential to be used in ACN-rich beverages as a replacement for CS.

An updated review on the stability of anthocyanins regarding the interaction with food proteins and polysaccharides

The health benefits of anthocyanins are compromised by their chemical instability and susceptibility to external stress. Researchers found that the interaction between anthocyanins and macromolecular components such as proteins and polysaccharides substantially determines the stability of anthocyanins during food processing and storage. The topic thus has attracted much attention in recent years. This review underlines the new insights gained in our current study of physical and chemical properties and functional properties in complex food systems. It examines the interaction between anthocyanins and food proteins or polysaccharides by focusing on the "structure-stability" relationship. Furthermore, multispectral and molecular computing simulations are used as the chief instruments to explore the interaction's mechanism. During processing and storage, the stability of anthocyanins is generally influenced by the adverse characteristics of food and beverage, including temperature, light, oxygen, enzymes, pH. While the action modes and types between protein/polysaccharide and anthocyanins mainly depend on their structures, the noncovalent interaction between them is the key intermolecular force that increases the stability of anthocyanins. Our goal is to provide the latest understanding of the stability of anthocyanins under food processing conditions and further improve their utilization in food industries. Practical Application: This review provides support for the steady-state protection of active substances.

Fortification of Pectin/Blackberry Hydrogels with Apple Fibers: Effect on Phenolics, Antioxidant Activity and Inhibition of α-Glucosidase

The objective of this study was to prepare hydrogels based on pectin and blackberry juice and additionally to fortify those hydrogels with apple fiber. For that purpose, two types of pectin (low methoxylated and high methoxylated) were used, and fortification was conducted with the addition of 10% of apple fiber. The hydrogels were evaluated for phenolic compounds, antioxidant activity and inhibition of α-glucosidase. In addition, the stability of these parameters after 8 months of storage was evaluated. Pectin type and addition of apple fiber had an impact on investigated parameters. Low methoxylated pectin hydrogels had a higher concentration of anthocyanins than high methoxylated pectin hydrogels, while the addition of apple fibers caused a decrease in anthocyanin content. However, fortified hydrogels had higher antioxidant activity due to the presence of phenolics from apple fibers. The results showed that anthocyanins were more favorable in inhibiting α-glucosidase because samples with higher anthocyanins concentration had lower IC₅₀ values. Obtained hydrogels can be used as intermediate products or ingredients (like fruit fillings or spreads) for the improvement or development of novel food products to increase their fiber content and antioxidant potential.

Sources and relative stabilities of acylated and nonacylated anthocyanins in beverage systems

Anthocyanins are considered as the largest group of water-soluble pigments found in the vacuole of plant cells, displaying range of colors from pink, orange, red, purple and blue. They belong to flavonoids, a polyphenolic subgroup. Application of anthocyanins in food systems as natural food colourants is limited due to the lack of stability under different environmental conditions such as light, pH, heat etc. Anthocyanins esterified with one or more acid groups are referred as acylated anthocyanins. Based on the presence or absence of acyl group, anthocyanins are categorized as acylated and nonacylated anthocyanins. Acylated anthocyanins are further classified as mono, di, tri, tetra acylated anthocyanins according to the number of acyl groups present in the anthocyanin. This review classifies common anthocyanin sources into non-acylated, mono-, di-, tri- and tetra-acylated anthocyanins based on the major anthocyanins present in these sources. The relative stabilities of these anthocyanins with respect to thermal, pH and photo stress in beverage systems are specifically discussed. Common anthocyanin sources such as elderberry, blackberry, and blackcurrant mainly contain nonacylated anthocyanins. Red radish, purple corn, black carrot also mainly contain mono acylated anthocyanins. Red cabbage and purple sweet potato have both mono and diacylated anthocyanins. Poly acylated anthocyanins show relatively higher stability compared with nonacylated and monoacylated anthocyanins. Several techniques such as addition of sweeteners, co-pigmentation and acylation techniques could enhance the stability of nonacylated anthocyanins. Flowers are main sources of polyacylated anthocyanins having higher stability, yet they have not been commercially exploited for their anthocyanins.

Tannin-rich extracts improve the performance of amidated pectin as an alternative microencapsulation matrix to alginate

Microencapsulation of tannin extracts through extrusion-gelation method was performed comparing two alternative encapsulation matrices: alginate and amidated pectin. The microstructure of the generated microbeads was studied, as well as their microencapsulation efficiency and release properties. Overall, pectin-based beads performed better than their alginate-based counterparts. This, combined with a greater incorporation of tannins in the feed formulations led to a higher tannin load in the final beads. The best microencapsulation efficiency was given by pectin microbeads loaded with 10% tannin extract (w/w), but the final tannin content could be further increased by adding a 20% (w/w) concentration of the extracts. During a 14-days storage, only a marginal loss of tannins was recorded for pectin-based microbeads. The results reveal that great potential exists in producing pectin-based microbeads in presence of tannins, which allow better loading capacities and improving structural properties, thanks to the interactions between the tannins and the amidated polysaccharide.

Polyphenol-Polysaccharide Complex: Preparation, Characterization and Potential Utilization in Food and Health

Polysaccharides and polyphenols coexist in many plant-based food products. Polyphenol-polysaccharide interactions may affect the physicochemical, functional, and physiological properties, such as digestibility, bioavailability, and stability, of plant-based foods. In this review, the interactions (physically or covalently linked) between the selected polysaccharides and polyphenols are summarized. The preparation and structural characterization of the polyphenol-polysaccharide conjugates, their structural-interaction relationships, and the effects of the interactions on functional and physiological properties of the polyphenol and polysaccharide molecules are reviewed. Moreover, potential applications of polyphenol-polysaccharide conjugates are discussed. This review aids in a comprehensive understanding of the synthetic strategy, beneficial bioactivity, and potential application of polyphenol-polysaccharide complexes. Expected final online publication date for the Annual Review of Food Science and Technology, Volume 13 is March 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Influence of Aqueous Phase Composition on Double Emulsion Stability and Colour Retention of Encapsulated Anthocyanins

Water-in-oil-in-water (W₁/O/W₂) emulsions (double emulsions) have often been used for the encapsulation of bioactive compounds such as anthocyanins. Instability of both anthocyanins and double emulsions creates a need for a tailored composition of the aqueous phase. In this work, double emulsions with a gelled internal water phase were produced and monitored over a 20-day storage period. The effect of the electrolyte phase composition (varying electrolyte components, including adipic acid, citric acid, and varying concentration of potassium chloride (KCl)) on anthocyanin and double emulsion stability was analysed using colour analysis, droplet sizing, and emulsion rheology. The effect of electrolytes on colour retention was shown to differ between the primary W₁/O emulsion and the secondary W₁/O/W₂ emulsion. Furthermore, droplet size analysis and emulsion rheology highlighted significant differences in the stability and structural behaviour of the emulsions as a function of electrolyte composition. In terms of colour retention and emulsion stability, a citrate-buffered system performed best. The results of this study highlight the importance of strict control of aqueous phase constituents to prevent anthocyanin degradation and maximise double emulsion stability. Additional experiments analysed the effect of pectin chemistry on the anthocyanin colour retention and leakage, finding no conclusive difference between the unmodified and amidated pectin.

Advanced approaches for improving bioavailability and controlled release of anthocyanins

Anthocyanins are a group of phytochemicals responsible for the purple or red color of plants. Additionally, they are recognized to have health promoting functions including anti-cardiovascular, anti-thrombotic, anti-diabetic, antimicrobial, neuroprotective, and visual protective effect as well as anti-cancer activities. Thus, consumption of anthocyanin supplement or anthocyanin-rich foods has been recommended to prevent the risk of development of chronic diseases. However, the low stability and bioavailability of anthocyanins limit the efficacy and distribution of anthocyanins in human body. Thus, strategies to achieve target site-local delivery with good bioavailability and controlled release rate are necessary. This review introduced and discussed the latest advanced techniques of designing lipid-based, polysaccharide-based and protein-based complexes, nano-encapsulation and exosome to overcome the limitation of anthocyanins. The improved bioavailability and controlled release of anthocyanins have great significance for gastrointestinal tract absorption, transepithelial transportation and cellular uptake. The techniques of applying different biocompatible materials and modifying the solubility of anthocyanins complex could achieve target site-local delivery with negligible degradation and good bioavailability in human body.

Stabilization of Lycium ruthenicum Murr. anthocyanins by natural polyphenol extracts

Anthocyanins are a group of flavonoids widely used as natural pigments and in functional foods. However, the sensitivity of anthocyanins to environment factors limits their utilization. The present study examined the stabilizing effects of polyphenol extracts from raspberry, sea-buckthorn, Lonicera edulis, and blackcurrant on Lycium ruthenicum Murr (LRM)-derived anthocyanins. After light and heat exposure, contents of total anthocyanins and the monomers were detected with the pH differential method and the HPLC. Remarkably, polyphenol extracts from raspberry, Lonicera edulis and blackcurrant extended the half-lives of anthocyanins, while the effect of the sea-buckthorn extracts was negligible. Noticeably, petunidin-3-O-[6-O-(4-O-trans-p-coumaroyl-alpha-L-rhamnopyranosyl)-beta-D-glucopyranoside]-5-O-[beta-D-glucopyranoside], the major component of LRM-derived anthocyanins, exhibited a dramatic increase in half-life with the presence of polyphenol extracts from raspberry, Lonicera edulis, and blackcurrant. In summary, our findings suggest the polyphenol extracts could be developed into copigments for stabilization of anthocyanins.

Grape polysaccharides: compositional changes in grapes and wines, possible effects on wine organoleptic properties, and practical control during winemaking

Polysaccharides present in grapes interact with wine sensory-active compounds (polyphenols and volatile compounds) via different mechanisms and can affect wine organoleptic qualities such as astringency, color and aroma. Studies on the role that grape polysaccharides play in wines are reviewed in this paper. First, the composition of grape polysaccharides and their changes during grape ripening, winemaking and aging are introduced. Second, different interaction mechanisms of grape polysaccharides and wine sensory-active compounds (flavanols, anthocyanins and volatiles) are introduced, and the possible effects on wine astringency, color and aroma caused by these interactions are illustrated. Finally, the control of the grape polysaccharide content in practice is discussed, including classical winemaking methods (applying different maceration enzymes, temperature control, co-fermentation, blending), modern vinification technologies (pulsed electric field, ultrasound treatment), and the development of new grape polysaccharide products.

Improved color stability of anthocyanins in the presence of ascorbic acid with the combination of rosmarinic acid and xanthan gum

This study investigated the protective effect and mechanism of action of combined use of rosmarinic acid (RA) and xanthan gum (XG) on the stability of anthocyanins (ACNs) in the presence of l-ascorbic acid (pH 3.0). The addition of RA and XG, alone and in combination, significantly enhanced the color stability of ACNs, and the combined use of RA and XG showed the best effect. FTIR, 1H NMR, AFM and computational molecular simulation analyses revealed that the improvement in ACN stability following the combined addition of RA and XG was due to intermolecular interactions such as hydrogen bonding and van der Waals forces. In the ACN-RA-XG ternary complexes, XG had stronger binding interactions with ACNs than RA. Our findings provide a valuable potential to enhance the stability of ACNs in the presence of ascorbic acid with the combined use of RA and XG.

Grape pectic polysaccharides stabilization of anthocyanins red colour: Mechanistic insights

Grape pectic polysaccharides-malvidin-3-O- β -d-glucoside binding was studied, aiming to unveil the impact of structural diversity of polysaccharides on anthocyanins-polysaccharides interactions. Polysaccharides were extracted with solutions of imidazole (ISP) and carbonate at 4 °C (CSP-4 °C) and room temperature (CSP-RT) and also recovered from the dialysis supernatant of the remaining cellulosic residue after the aqueous NAOH extraction of hemicellulosic polysaccharides (Sn-CR). Polysaccharides richer in homogalacturonan domains, like those present in the CSP-4 °C fraction had approximately 50-fold higher binding affinity to malvidin-3-O- β-d-glucoside, than polysaccharides with side chains (as ISP and CSP-RT extractable polysaccharides). CSP-4 °C polysaccharides showed a positive effect on malvidin-3-O- β-d-glucoside colour fading. Hydration equilibrium constant of malvidin-3-O- β-d-glucoside in the presence of CSP-4 °C polysaccharides was higher, showing the preferential stabilization of the flavylium cation. The results showed that anthocyanins colour stabilization can be promoted by pectic polysaccharide structures such as those extracted by cold carbonate.

Effects of high hydrostatic pressure on the binding capacity, interaction, and antioxidant activity of the binding products of cyanidin-3-glucoside and blueberry pectin

In this study, the effects of high hydrostatic pressure (HP) treatment on the binding capacity, interaction, and antioxidant activity of the binding products of blueberry pectin (BP) and cyanidin-3-glucoside (C3G) were assessed. HP was found to significantly improve the adsorption between C3G and BP. After binding, the C3G concentration was found to be the highest (382.1 ± 13.2 μg/mg for BP) when using a C3G-BP mass ratio of 1:2, a pressure of 400 MPa, and a holding time of 15 min. HP processing decreased particle size and altered the characteristics of C3G-BP complexes. The main binding form of the complexes before HP treatment was pectin-wrapped C3G by hydrogen bond interaction, while HP caused charged groups in pectin to be more exposed and improve the electrostatic interaction between C3G and BP. The antioxidant activity results showed that the presence of BP could protect the ferric-reducing antioxidant power of C3G after HP treatment.

Interactions between cell wall polysaccharides and polyphenols: Effect of molecular internal structure

Cell wall polysaccharides (CPSs) and polyphenols are major constituents of the dietary fiber complex in plant-based foods. Their digestion (by gut microbiota) and bioefficacy depend not only on their structure and quantity, but also on their intermolecular interactions. The composition and structure of these compounds vary with their dietary source (i.e., fruit or vegetable of origin) and can be further modified by food processing. Various components and structures of CPSs and polyphenols have been observed to demonstrate common and characteristic behaviors during interactions. However, at a fundamental level, the mechanisms that ultimately drive these interactions are still not fully understood. This review summarizes the current state of knowledge on the internal factors that influence CPS-polyphenol interactions, describes the different ways in which these interactions can be mediated by molecular composition or structure, and introduces the main methods for the analysis of these interactions, as well as the mechanisms involved. Furthermore, a comprehensive overview is provided of recent key findings in the area of CPS-polyphenol interactions. It is becoming clear that these interactions are shaped by a multitude of factors, the most important of which are the physicochemical properties of the partners: their morphology (surface area and porosity/pore shape), chemical composition (sugar ratio, solubility, and non-sugar components), and molecular architecture (molecular weight, degree of esterification, functional groups, and conformation). An improved understanding of the molecular mechanisms that drive interactions between CPSs and polyphenols may allow us to better establish a bridge between food processing and the bioavailability of colonic fermentation products from CPSs and antioxidant polyphenols, which could ultimately lead to the development of new guidelines for the design of healthier and more nutritious foods.

Brás N, Mateus N, de Freitas V, Fernandes I. Anthocyanins as Antidiabetic Agents-In Vitro and In Silico Approaches of Preventive and Therapeutic Effects

Many efforts have been made in the past two decades into the search for novel natural and less-toxic anti-diabetic agents. Some clinical trials have assigned this ability to anthocyanins, although different factors like the food source, the amount ingested, the matrix effect and the time of consumption (before or after a meal) seem to result in contradictory conclusions. The possible mechanisms involved in these preventive or therapeutic effects will be discussed-giving emphasis to the latest in vitro and in silico approaches. Therapeutic strategies to counteract metabolic alterations related to hyperglycemia and Type 2 Diabetes Mellitus (T2DM) may include: (a) Inhibition of carbohydrate-metabolizing enzymes; (b) reduction of glucose transporters expression or activity; (c) inhibition of glycogenolysis and (d) modulation of gut microbiota by anthocyanin breakdown products. These strategies may be achieved through administration of individual anthocyanins or by functional foods containing complexes of anthocyanin:carbohydrate:protein.

Co-Microencapsulation of Anthocyanins from Black Currant Extract and Lactic Acid Bacteria in Biopolymeric Matrices

Anthocyanins from black currant extract and lactic acid bacteria were co-microencapsulated using a gastro-intestinal-resistant biocomposite of whey protein isolate, inulin, and chitosan, with an encapsulation efficiency of 95.46% ± 1.30% and 87.38% ± 0.48%, respectively. The applied freeze-drying allowed a dark purple stable powder to be obtained, with a satisfactory content of phytochemicals and 11 log colony forming units (CFU)/g dry weight of powder (DW). Confocal laser microscopy displayed a complex system, with several large formations and smaller aggregates inside, consisting of biologically active compounds, lactic acid bacteria cells, and biopolymers. The powder showed good storage stability, with no significant changes in phytochemicals and viable cells over 3 months. An antioxidant activity of 63.64 ± 0.75 mMol Trolox/g DW and an inhibitory effect on α-amylase and α-glucosidase of 87.10% ± 2.08% and 36.96% ± 3.98%, respectively, highlighted the potential biological activities of the co-microencapsulated powder. Significantly, the in vitro digestibility profile showed remarkable protection in the gastric environment, with controlled release in the intestinal simulated environment. The powder was tested by addition into a complex food matrix (yogurt), and the results showed satisfactory stability of biologically active compounds when stored for 21 d at 4 °C. The obtained results confirm the important role of microencapsulation in ensuring a high degree of protection, thus allowing new approaches in developing food ingredients and nutraceuticals, with enhanced functionalities.

Could fruits be a reliable source of food colorants? Pros and cons of these natural additives

Color additives are important for the food industry to improve sensory quality lost during food process and to expand the variety of products. In general, artificial colorants have lower cost and better stability than the natural ones. Nevertheless, studies have reported their association with some health disorders. Furthermore, consumers have given greater attention to food products with health beneficial effects, which has provided a new perspective for the use of natural colorants. In this context, fruits are an excellent alternative source of natural compounds, that allow the obtainment of a wide range of colorant molecules, such as anthocyanins, betalains, carotenoids, and chlorophylls. Furthermore, in addition to their coloring ability, they comprise different bioactive properties. However, the extraction and application of natural colorants from fruits is still a challenge, since these compounds show some stability problems, in addition to issues related to the sustainability of raw-materials providing. To overcome these limitations, several studies have reported optimized extraction and stabilization procedures. In this review, the major pigments found in fruits and their extraction and stabilization techniques for uses as food additives will be looked over.

Interaction of Protein Isolate with Anthocyanin Extracted from Black Soybean and Its Effect on the Anthocyanin Stability

The interactions between black soybean protein isolate (B-SPI) and cyanidin 3-O-glucoside (C3G), anthocyanin extracted from black soybean coat was investigated under neutral conditions. The fluorescence spectra showed that C3G had fluorescence quenching effects on B-SPI. Thermodynamic parameters showed that ∆G < 0, which demonstrated that the binding was a spontaneous reaction. Since ΔH > 0 and ΔS > 0, the interactions between C3G and B-SPI was mainly hydrophobic interactions. Fourier infrared spectroscopy results suggested that the contents of α-helix and β-sheet structure showed an increasing trend, whereas the β-angle content displayed a decreasing trend. The degradation of C3G followed first-order kinetics at 85 °C and 100 °C. After the interactions with B-SPI, the degradation rate constant was decreased and the half-life of C3G was prolonged from 70.25 ± 0.90 min to 175.64 ± 38.04 min at 85 °C, from 62.68 ± 1.1 min to 72.51 ± 2.5 min at 100 °C (p < 0.05). The results indicated that the interactions of B-SPI and C3G improved the thermal stability of C3G under heating conditions.

Interactions of Anthocyanins with Pectin and Pectin Fragments in Model Solutions

Anthocyanins determine the color and potential health-promoting properties of red fruit juices, but the juices contain remarkably less anthocyanins than the fruits, which is partly caused by the interactions of anthocyanins with the residues of cell wall polysaccharides like pectin. In this study, pectin was modified by ultrasound and enzyme treatments to residues of polysaccharides and oligosaccharides widely differing in their molecular weight. Modifications decreased viscosity and degrees of acetylation and methylation and released smooth and hairy region fragments. Native and modified pectin induced different effects on the concentrations of individual anthocyanins after short-term and long-term incubation caused by both hydrophobic and hydrophilic interactions. Results indicate that both pectin and anthocyanin structure influence these interactions. Linear polymers generated by ultrasound formed insoluble anthocyanin complexes, whereas oligosaccharides produced by enzymes formed soluble complexes with protective properties. The structure of the anthocyanin aglycone apparently influenced interactions more than the sugar moiety.

Blueberry pectin and increased anthocyanins stability under in vitro digestion

Pectin was extracted from blueberry powder as water soluble fraction (WSF), rich in branched regions, and chelator soluble fraction (CSF), linear, with strong negative charge. Binding of pectins with three anthocyanin standards (malvidin-3-glucoside; M3G, cyanidin-3-glucoside; C3G, and delphinidin-3-glucoside; D3G) and blueberry extract (BBE) were used. Without blueberry pectin, M3G was the most stable followed by C3G, whereas D3G completely disappeared after gastrointestinal digestion. CSF prevented M3G and C3G degradation more than WSF, the in vitro stability was highest with CSF and C3G. Increased stability of anthocyanins after simulated gastrointestinal digestion suggests that anthocyanins can be transported to colon where gut microbiota actively produce anthocyanin metabolites. The amount of bound anthocyanins that interacted with blueberry pectin increased as the number of hydroxyl groups increased on anthocyanins. Hydrogen bonding in addition to electrostatic interaction contribute to stability of pectin-anthocyanins interaction at pH 4.0 and contribute to stability under gastrointestinal simulation.

Nanoemulsion and Nanoliposome Based Strategies for Improving Anthocyanin Stability and Bioavailability

BACKGROUND

Anthocyanins, a flavonoid class of water-soluble pigments, are reported to possess several biological activities, including antioxidant, anti-inflammatory, and anti-cancer. However, anthocyanins are highly susceptible to degradation in high pH, light, heat, and oxygen during processing and storage. Conventional microencapsulation techniques fail to provide stability to anthocyanins under physiological environments mainly because of their large particle size as well as low zeta potential and encapsulation efficiency.

METHODS

Nanotechnology provides novel strategies for preparing nanoformulations to enhance the physicochemical stability of anthocyanins. Nanoemulsion and nanoliposome are the two most commonly used nanosystems in pharmaceutical and food-related fields. In this review, an overview of various nanoemulsion and nanoliposome systems reported recently for enhancing stability, bioavailability, and bioactivity of anthocyanins is presented.

RESULTS

Anthocyanin nanoemulsions with different oil, water, surfactant, and cosurfactant ratios were prepared from extracts of mangosteen peel, purple sweet potato, cranberry, red cabbage, blueberry, jaboticaba peel, and acai berry and evaluated for their antioxidant activity, enhancement of physicochemical stability, topical skin application, and urinary tract infection. Likewise, unilamellar and multilamellar nanoliposomes were prepared using different types and levels of lecithin without or with cholesterol from anthocyanin standards and extracts of Hibiscus sabdariffa, mulberry, elderberry, black carrot, and pistachio green hull for the evaluation of physicochemical and oxidative stability, in vitro bioaccessibility, and melanogenic activity, as well as protective effects against diabetes mellitus and cataract.

CONCLUSION

This review provides an insight into the current nanotechnology updates on enhancement of anthocyanin stability and biological activity.