Solubilization of proteins in extracted oil bodies by SDS: A simple and efficient protein sample preparation method for Tricine–SDS–PAGE

Analytical approaches for assessing protein structure in protein-rich food: A comprehensive review

This review focuses on changes in nutrition and functional properties of protein-rich foods, primarily attributed to alterations in protein structures. We provide a comprehensive overview and comparison of commonly used laboratory methods for protein structure identification, aiming to offer readers a convenient understanding of these techniques. The review covers a range of detection technologies employed in food protein analysis and conducts an extensive comparison to identify the most suitable method for various proteins. While these techniques offer distinct advantages for protein structure determination, the inherent complexity of food matrices presents ongoing challenges. Further research is necessary to develop and enhance more robust detection methods to improve accuracy in protein conformation and structure analysis.

Effect of high hydrostatic pressure treatment on the antioxidant activity of lactoferrin before and after gastrointestinal digestion

In this study, high hydrostatic pressure treatment of lactoferrin was used to investigate its effect on the hydrolysis and antioxidant activity of lactoferrin. The results showed that high hydrostatic pressure treatment at 600 MPa increased the exposure level of tryptophan residues of lactoferrin by 82.29%, which significantly altered the tertiary structure of lactoferrin, and this change was observed in scanning electron microscopy as an increase in the contact area of lactoferrin that could be contacted by proteases. Pressure treatments of 400 MPa and above increased the hydrolysis of lactoferrin for gastrointestinal digestion by 21.19%, which increased the release of antioxidant-related amino acids and increased the free radical scavenging capacity of lactoferrin intestinal digestive fluid by 35.12%. Meanwhile, two lactoferrin antioxidant peptides, QAYPNLCQLCK and NCPDKFCLFK, were identified in the lactoferrin intestine digest. These findings indicate that high hydrostatic pressure treatment could be a potentially beneficial method for processing lactoferrin.

Effects of Pretreatment on Stability of Peanut Oil Bodies and Functional Characteristics of Proteins Extracted by Aqueous Enzymatic Method

Effects of dry and wet grind on peanut oil and protein yield, oil bodies (OBs) stability, fatty acid composition, protein composition and functional characteristics were systematically analyzed. Results showed that peanut oil and protein yields reached highest at dry grind 90 s (92.56% and 83.05%, respectively), while peanut oil and protein yields were 94.58% and 85.36%, respectively, at wet grind 120 s. Peanut oil and protein yields by wet grind was 2.18% and 2.78% higher than that of dry grind, respectively. Surface protein concentration (Г) and absolute value of zeta potential of OBs extracted by wet grind (WOBs) were 11.53 mg/m 2 and 18.51 mV, respectively, which were higher than OBs extracted by dry grind (DOBs), indicating stability of WOBs was higher than DOBs. Relative contents of oleic acid and linoleic acid in peanut oil, essential and hydrophobic amino acids in protein extracted by wet grind were higher than dry grind. There was little difference in protein composition between wet and dry grind, but thermal denaturation degree of protein obtained by wet grind was lower than dry grind. Solubility, oil retention, emulsion stability, foaming and foam stability of protein obtained by wet grind were better than dry grind. Results from this study provided theoretical basis for grind pretreatment selection of aqueous enzymatic method.

Study on the Stability Mechanism of Peanut OBs Extracted with the Aqueous Enzymatic Method

In this study, the internal relationships among oil bodies (OBs), the protein-phospholipid interactions in aqueous phase, oil-water interface behavior, and the stability of reconstituted OBs were analyzed from the bulk phase, interface, and macro perspectives, and the stability mechanism of OBs was discussed. OB proteins and phospholipids were combined through hydrophobic and electrostatic interactions, resulting in the stretching of protein conformation. OB proteins and phospholipids act synergistically to increase interface pressure and the rate of increase in interface pressure with relatively stable elastic behavior, which is beneficial to the formation and stability of interfacial films. When OBs were reconstituted by an OB protein-phospholipid complex system, phospholipids bound to OB proteins through hydrophobic and electrostatic interactions. OB proteins and phospholipids uniformly covered the oil droplet surface of reconstituted OBs to form a stable interfacial film, which maintained the stability of OBs. The addition of phospholipids significantly reduced the particle size of OBs prepared by OB proteins in a dose-dependent manner, and particle size decreased with the increase in phospholipid content (p < 0.05). Phospholipids increased the net surface charge, enhanced electrostatic repulsion, and improved the physicochemical stability of reconstituted OBs. The stability mechanism elucidated in this study provides a theoretical basis for the demulsification of peanut OBs.

Characterization of proteases from Irpex lacteus grown on minimally denatured soybean meal

BACKGROUND

Acid and thermal stabilities are important properties for the preparation of acidic protein beverage. It is an important method for enzymatic modification to improve the functional properties of protein. Irpex lacteus protease showed a selective hydrolysis to soy proteins. The purpose of this study was to investigate the mechanism of enzymatic hydrolysis and its effects on acid and thermal stabilities of soy proteins.

RESULTS

The I. lacteus protease selectively hydrolyzed the α and α' subunits of the native soybean β-conglycinin (7S globulin) to produce products that presented as the 55 kDa band upon sodium dodecyl sulfate polyacrylamide gel electrophoresis. The amino acid sequences of 55 kDa polypeptides were analyzed in gel multi-enzyme digestion followed by liquid chromatography-mass spectrometry. By matching the multi-enzyme digestion peptides with the published polypeptide chain sequences of the α and α' subunits, it was confirmed that the 55 kDa polypeptides were formed by eliminating amino acid residues on both sides of the N- and C-terminals. From the published protein structure database (https://www.uniprot.org/), it is known that the cleaved peptide bonds were in extension regions. Non-selective enzyme hydrolysis of both β-conglycinin (7S globulin) and glycinin (11S globulin), with corresponding drastic increases in the degree of hydrolysis, was observed when the substrates were preheated to the denaturation degree of 40% and above. However, 55 kDa hydrolyzed products and B polypeptides showed some extent of resistance to the proteolysis by I. lacteus protease even if denaturation degree was 100%. Both selective and non-selective hydrolysis of soy proteins by I. lacteus protease improved the acid and heat stabilities under the same hydrolysis conditions (enzyme/substrate ratio, time, and temperature).

CONCLUSION

Enzymatic hydrolysis of soybean proteins by the I. lacteus protease can effectively improve the acid and thermal stabilities of proteins. This discovery is significant to avoid aggregation during processing in the beverage industry. In the near future, the protease has potential application value for modification of other proteins. © 2022 Society of Chemical Industry.

NaCl induces flocculation and lipid oxidation of soybean oil body emulsions recovered by neutral aqueous extraction

BACKGROUND

Soybean oil bodies (SOB) are naturally pre-emulsified lipid droplets recovered directly from soybean seeds. Almost all food emulsions contain salts. However, it was not clear how the incorporation of salts affected the physicochemical stability of SOB.

RESULTS

This study investigated the effect of NaCl (0-1.2%) on the physical and oxidative stability of SOB emulsions under neutral (pH 7) and acidic (pH 3) conditions. In the presence of NaCl, the SOB emulsion (pH 7) showed strong flocculation during storage due to electrostatic screening. The NaCl-induced flocculation of SOB was attenuated at pH 3, which may be due to the difference in conformation or interaction of the protein interfaces covering SOB at different pH values. The increase in ionic strength or acid conditioning treatment resulted in a remarkable increase in the stability of SOB emulsions against coalescence. The confocal laser scanning microscopy images also confirmed the NaCl-induced changes in the flocculation/coalescence properties of SOB. The oxidative behavior tests indicated that SOB emulsions containing NaCl were more susceptible to lipid oxidation but protein oxidation was inhibited due to electrostatic screening, which reduced pro-oxidant accessibility of unadsorbed proteins in the emulsion. This oxidative behavior was attenuated at pH 3.

CONCLUSION

The incorporation of NaCl significantly reduced the physical and oxidative stability of the SOB emulsion, and acidic pH mitigated NaCl-induced flocculation and lipid oxidation of SOB. © 2021 Society of Chemical Industry.

Effects of pH on the Composition and Physical Stability of Peanut Oil Bodies from Aqueous Enzymatic Extraction

Peanut oil body (POB), which is rich in unsaturated fatty acids and bioactive substances, is widely used in cosmetics, food, and medicine. Compared with synthetic emulsifiers, peanut oil bodies have health advantages as natural emulsions. The physicochemical properties of oil bodies affect their food processing applications. To improve peanut oil body yield, cell-wall-breaking enzymes were screened for aqueous enzymatic extraction. The optimum conditions were as follows: enzymatic hydrolysis time, 2 h; material-to-liquid ratio, 1 : 5 ( $m/v$ ); enzyme concentration, 2% ( $v/m$ ); and temperature, 50°C. Oil body stability was closely related to pH. With increasing pH, the average particle size and zeta-potential of the oil bodies increased, indicating aggregation, as confirmed by microstructure analysis. At pH 11, exogenous proteins at the oil body interface were eluted, leaving endogenous proteins, which led to a decreased interfacial protein content and oil body aggregation. Therefore, oil body stability decreased under alkaline pH conditions, but no demulsification occurred.

Effect of water bath-assisted water extraction on physical and chemical properties of soybean oil body emulsion

Soybean oil body (SOB), rich in polyunsaturated fatty acids and biologically active substances, is used as a natural emulsifier in food processing. In addition, SOB is healthier than synthetic emulsifiers. However, the physical and chemical properties of the SOB emulsion directly affect its application in food processing. In order to study the effect of water bath extraction (WBAE) on SOBs, the effects of WBAE method on the composition of SOBs, the zeta potential, average particle size, oxidation stability, and viscosity characteristics of SOB emulsions were researched. It was found that both protein and moisture contents of SOB decreased with increasing WBAE temperature; however, lipid content increased. These results were attributed to the exogenous proteins gradually denatured and dissociated with extraction temperature from 60°C to 100°C. Increasing the extraction temperature, the average particle size of the SOB emulsions increased, the oxidative stability was improved, the Zeta potential and viscosity decreased, and the fluidity of emulsions was improved. The SOB extracted at 100°C has broad application prospects in food, and this research is meaningful for supplying fundamental information for selecting proper extraction temperature of SOBs.

In situ nanomechanical properties of natural oil bodies studied using atomic force microscopy

Natural oil bodies (OBs) from plant organs represent an important category of functional ingredients and materials in a variety of industrial sectors. Their applications are closely related to the membrane mechanical properties on a single droplet level, which remain difficult to determine. In this research, the mechanical properties of the membranes of OBs from soybean, sesame, and peanut were investigated in-situ by atomic force microscopy (AFM). Different regions of the force-deformation curves obtained during compression were analyzed to extract the stiffness Kb or Young's modulus of the OB membranes using Hooke's law, Reissner theory, and the elastic membrane theory. At higher strains (ε = 0.15-0.20), the elastic membrane theory breaks down. We propose an extension of the theory that includes a contribution to the force from interfacial tension based on the Gibbs energy, allowing effective determination of Young's modulus and interfacial tension of the OB membranes in the water environment simultaneously. The mechanical properties of the OBs of different sizes and species, as well as a comparison with other phospholipid membrane materials, are discussed and related to their membrane compositions and structures. It was found that the natural OBs are soft droplets but do not rupture and can fully recover following compressive strains as large as 0.3. The OBs with higher protein/oil ratio, have smaller size and stronger mechanical properties, and thus are more stable. The low interfacial tension due to the existence of phospholipid-protein membrane also contributes to the stability of the OBs. This is the first report measuring the mechanical properties of OB membranes in-situ directly.

Combination of Alcalase 2.4 L and CaCl2 for aqueous extraction of peanut oil

The combined application of CaCl₂ and Alcalase 2.4 L to the aqueous extraction process of peanuts was evaluated as a method to destabilize the oil body (OB) emulsion and improve the oil yield. After adding 5 mM CaCl₂ , the oil yield was reached to 92.0% which was similar with that obtained using Alcalase 2.4 L alone, and the required enzyme loading was decreased by approximately 60 times. In addition, the demulsification mechanism during aqueous extraction process was also investigated. Particle size and zeta-potential measurements indicated that the stability of the peanut OB emulsion dramatically decreased when CaCl₂ was added. Under these conditions, the demulsification of Alcalase 2.4 L performed was more efficiently. SDS-PAGE results showed that adding CaCl₂ changed the subunit structure of the peanut OB interface proteins and promoted the cross-linking among the arachin Ara h3 isoforms, resulting in unstable emulsions.

Improving the Stability of Oil Body Emulsions from Diverse Plant Seeds Using Sodium Alginate

In this study, peanut, sesame, and rapeseed oil bodies (OBs) were extracted by the aqueous medium method. The surface protein composition, microstructure, average particle size d 4 ,   3 , ζ-potential of the extracted OBs in aqueous emulsion were characterized. The stability of the OB emulsions was investigated. It was found that different OB emulsions contained different types and contents of endogenous and exogenous proteins. Aggregation at low pHs (<6) and creaming at high pHs (7 and 8) both occurred for all of three OB emulsions. Sodium alginate (ALG) was used to solve the instability of OB emulsions under different conditions-low concentration of ALG improved the stability of OB emulsions below and near the isoelectric point of the OBs, through electrostatic interaction. While a high concentration of ALG improved the OB emulsion stability through the viscosity effect at pH 7. The OB emulsions stabilized by ALG were salt-tolerant and freeze-thaw resistant.

Effect of Physiochemical Factors and Peanut Varieties on the Charge Stability of Oil Bodies Extracted by Aqueous Method

In order to explore the scientific basis for the application of oil bodies (OBs) from different peanut varieties in food, the effect of NaCl (0-100 mM), thermal processing (25-45°C, 1 h) and pH (3.0, 7.4, and 9.0) on their zeta potentials was analyzed in this study. The zeta potentials of OB suspensions (in 10 mM phosphate buffer) prepared from five peanut varieties in different salt concentrations (0-100 mM) were positive at pH 3.0, while they remained negative at pH 7.4 and 9.0. The absolute values of zeta potentials were over 20 mV at a lower salt concentration (< 10 mM NaCl) at pH 3.0 and 7.4. Particularly, the values of zeta potentials of Yuhua27 and Yuhua9830 were as high as 40 mV in the absence of NaCl at pH 7.4. The OBs exhibited diverse change trends between the five peanut varieties in the temperatures from 25 to 45°C (0 mM NaCl, pH 7.4). The OBs from Yuhua9830 exhibited the best thermal adaptability at the different temperatures tested than the other four peanut varieties. These outcomes suggested that OBs extracted from different varieties possess diverse properties and may provide a new insight into choosing a suitable peanut variety for the food industry.

Effect of sodium alginate on the stability of natural soybean oil body emulsions

For the first time sodium alginate is used to improve the stability of oil body emulsions against salt, pH and freeze–thaw cycling.

Soybean P34 Probable Thiol Protease Probably Has Proteolytic Activity on Oleosins

P34 probable thiol protease (P34) and Gly m Bd 30K (30K) show high relationship with the protease of 24 kDa oleosin of soybean oil bodies. In this study, 9 day germinated soybean was used to separate bioprocessed P34 (P32) from bioprocessed 30K (28K). Interestingly, P32 existed as dimer, whereas 28K existed as monomer; a P32-rich sample had proteolytic activity and high cleavage site specificity (Lys-Thr of 24 kDa oleosin), whereas a 28K-rich sample showed low proteolytic activity; the P32-rich sample contained one thiol protease. After mixing with purified oil bodies, all P32 dimers were dissociated and bound to 24 kDa oleosins to form P32-24 kDa oleosin complexes. By incubation, 24 kDa oleosin was preferentially hydrolyzed, and two hydrolyzed products (HPs; 17 and 7 kDa) were confirmed. After most of 24 kDa oleosin was hydrolyzed, some P32 existed as dimer, and the other as P32-17 kDa HP. It was suggested that P32 was the protease.

Synthesis and properties of the rapeseed meal-grafted-poly(methyl methacrylate-co-butyl acrylate) oil-absorbents

Economical RSMs-g-P(MMA-co-BA) oil-absorbents with 3D network structures were prepared through free radical graft copolymerization, which exhibited good oil absorbency, reusability and were applied to oil/water separation.