Electrochemical assay for determination of gluten in flour samples

Simple detection of gluten in commercial gluten-containing samples with a novel nanoflower electrosensor made of molybdenum disulfide with comparison of the ELISA method

In this study, a new electrochemical sensor based on molybdenum disulfide (MoS2) nanoflowers/glassy carbon electrode (GCE was created for the sensitive detection of gluten. The prepared nanocatalysts were characterized using scanning electron microscopy with energy dispersive spectroscopy, x-ray diffraction, and x-ray photoelectron spectroscopy. The effects of the prepared nanocatalysts, pH value, and dropping amounts on the results were examined in detail. The electrochemical performance of the developed sensor (MoS2 nanoflowers/GCE) was then evaluated using differential pulse voltammetry, and the sensor was found to have significant electrochemical activity against gluten. A substantial linear connection was observed in the range of 0.5-100 ppm of gluten concentration under optimum experimental circumstances, and the detection limit between peak current and gluten concentration was determined as 1.16 ppm. The findings showed that the MoS2 nanoflowers/GCE gluten sensor has exceptional selectivity and stability. Finally, the generated electrochemical sensor was effectively utilized for gluten detection in commercial gluten-containing materials with a detection limit of 0.1652 ppm. Thus, the developed MoS2 nanoflowers/GCE sensor offers a potential method for the detection of other molecules and is a promising candidate for gluten detection in commercial samples.

Recent advances in analytical strategies and microsystems for food allergen detection

Food allergies are abnormal immune responses that typically occur within short period after exposure of certain allergenic proteins in food or food-related resources. Currently, the means to treat food allergies is not clearly understood, and the only known prevention method is avoiding the consumption of allergen-containing foods. From the viewpoint of analytical methods, the effective detection of food allergens is hindered by the effects of various treatment processes and food matrices on trace amounts of allergens. The aim of this effort is to provide the reader with a clear and concise view of new advances for the detection of food allergens. Therefore, the present review explored the development status of various biosensors for the real-time, on-site detection of food allergens with high selectivity and sensitivity. The review also described the analytical consideration for the quantification of food allergens, and global development trends and the future availability of these technologies.

Enhancement of Electrochemical Detection of Gluten with Surface Modification Based on Molecularly Imprinted Polymers Combined with Superparamagnetic Iron Oxide Nanoparticles

Novel molecularly imprinted polymers (MIPs) represent a selectively recognized technique for electrochemical detection design. This rapid and simple method prepared via chemical synthesis consists of a monomer crosslinked with an initiator, whereas low sensitivity remains a drawback. Nanomaterials can improve charge transfer for MIP surface modification in order to overcome this problem. SPIONs have semiconductor and superparamagnetic properties that can enhance carrier mobility, causing high sensitivity of electrochemical detection. In this work, surface modification was achieved with a combination of MIP and SPIONs for gluten detection. The SPIONs were synthesized via the chemical co-precipitation method and mixed with MIPs by polymerizing gluten and methyl methacrylate (MMA), presented as a template and a monomer. Magnetic MIP (MMIP) was modified on a carbon-plate electrode. The morphology of modified electrode surfaces was determined by scanning electron microscopy-energy-dispersive X-ray spectrometry. The performance of the MMIP electrode was confirmed by cyclic voltammetry, amperometry, and electrochemical impedance spectroscopy. The MMIP electrode for gluten detection shows a dynamic linear range of 5-50 ppm, with a correlation coefficient of 0.994 and a low detection limit of 1.50 ppm, which is less than the U.S. Food and Drug Administration requirements (20 ppm); moreover, it exhibits excellent selectivity, sensitivity, stability, and reproducibility.

Detection of Senecionine in Dietary Sources by Single-Use Electrochemical Sensor

Pyrrolizidine alkaloids (PAs) are produced by plants as secondary compounds that are the most widely distributed natural toxins. There have been many cases of human toxicity caused by consumption of toxic plant species, as herbal teas and grain or grain products contaminated with PA-containing seeds have been reported. Companies that produce dried spices and tea leaves should examine the PA level in their products. For the first time in the literature, a simple and inexpensive electrochemical assay based on a single-use sensor was introduced for quantitative determination of senecionine (SEN) in the most frequently contaminated food sources. SEN was immobilized on a pencil graphite electrode surface by the passive adsorption technique. Differential pulse voltammetry (DPV) was used to evaluate the oxidation signal of SEN, which was observed to be around +0.95 V. The oxidation signal was specific to the SEN in the sample, and the current value was proportional to its concentration. The selectivity of our assay was also tested in the presence of other similar PAs such as intermedine, lycopsamine, and heliotrine. The detection limit is calculated by developed assay and found to be 5.45 µg/mL, which is an acceptable concentration value of SEN occurring at toxic levels for consumers. As an application of the developed sensor in food products, the electrochemical detection of SEN was successfully performed in flour and herbal tea products.

Functionalized TiO2 Nanotube Platform for Gliadin Electroanalysis

The present paper presents a gliadin detection method. This method is based on a modified Ti electrode. Modification was performed by a simple and cheap anodization. Then, a layer of graphene oxide was added, and gliadin antibody was fixed on the electrode surface. Using this complex system, electrochemical impedance spectroscopy was used for gliadin detection. Solutions with known gliadin (a fraction from gluten) content were used for analysis. Impedance measured at a certain frequency and coating resistance were analyzed. Better results (good linearity and lower detection limit) were obtained by plotting impedance at a certain frequency versus gliadin concentration. Coating resistance was proved to be in linear dependency with gliadin concentration only at lower concentrations. This system based on titanium nanostructured electrode has the potential to be used for gluten contamination detection from foods.

Immunological Methods in Gluten Risk Analysis: A Snapshot

Gluten is among the 14 major food allergens officially recognized by Regulation (EU) No. 1169/2011. The risk to coeliac patients from gluten presence in the food products they consume is likely due to the unintentional contamination of naturally gluten-free (GF) and GF-labelled products, or to hidden sources of gluten in processed GF products. The aim of this paper is to provide a snapshot of gluten risk analysis, with emphasis on immunological methods currently used in gluten detection. The study highlights that immunoassays have some advantages over other analytical methods in gluten determination and are suitable for routine tests. However, some factors (e.g., complexity of the food matrix, type of the applied antibody, gluten extraction procedures and lack of reference material) affect the reliability of obtained results. Hence, efforts are required at an analytical level to overcome the drawbacks of the immunological methods currently available. Harmonization is necessary, so as to assist both consumers in making safe food choices, and the food industry in gluten risk assessment, management and communication.

Rapid and selective luminescent sensing of allergenic gluten by highly phosphorescent switch-on probe

First time the luminescent switch-on probe using novel water-soluble cyclometallated iridium complex (Ir-dc) has been developed for sensitive and selective detection of gluten in the presence of several interfering elements. Linear concentration range of gluten is obtained from 5 to 200 µg/mL with a limit of detection 2.6 µg/mL. The Ir-dc complex responded to the broad pH range which is advantageous for the detection of gluten in various food samples. Additionally, It has been successfully employed for the detection of gluten in commercial food samples of wheat flour and oats with highest recovery values, indicating applicability of Ir-dc for practical usage.

Information Visualization and Feature Selection Methods Applied to Detect Gliadin in Gluten-Containing Foodstuff with a Microfluidic Electronic Tongue

The fast growth of celiac disease diagnosis has sparked the production of gluten-free food and the search for reliable methods to detect gluten in foodstuff. In this paper, we report on a microfluidic electronic tongue (e-tongue) capable of detecting trace amounts of gliadin, a protein of gluten, down to 0.005 mg kg^-1 in ethanol solutions, and distinguishing between gluten-free and gluten-containing foodstuff. In some cases, it is even possible to determine whether gluten-free foodstuff has been contaminated with gliadin. That was made possible with an e-tongue comprising four sensing units, three of which made of layer-by-layer (LbL) films of semiconducting polymers deposited onto gold interdigitated electrodes placed inside microchannels. Impedance spectroscopy was employed as the principle of detection, and the electrical capacitance data collected with the e-tongue were treated with information visualization techniques with feature selection for optimizing performance. The sensing units are disposable to avoid cross-contamination as gliadin adsorbs irreversibly onto the LbL films according to polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) analysis. Small amounts of material are required to produce the nanostructured films, however, and the e-tongue methodology is promising for low-cost, reliable detection of gliadin and other gluten constituents in foodstuff.

Pencil Graphite Electrodes: A Versatile Tool in Electroanalysis

Due to their electrochemical and economical characteristics, pencil graphite electrodes (PGEs) gained in recent years a large applicability to the analysis of various types of inorganic and organic compounds from very different matrices. The electrode material of this type of working electrodes is constituted by the well-known and easy commercially available graphite pencil leads. Thus, PGEs are cheap and user-friendly and can be employed as disposable electrodes avoiding the time-consuming step of solid electrodes surface cleaning between measurements. When compared to other working electrodes PGEs present lower background currents, higher sensitivity, good reproducibility, and an adjustable electroactive surface area, permitting the analysis of low concentrations and small sample volumes without any deposition/preconcentration step. Therefore, this paper presents a detailed overview of the PGEs characteristics, designs and applications of bare, and electrochemically pretreated and chemically modified PGEs along with the corresponding performance characteristics like linear range and detection limit. Techniques used for bare or modified PGEs surface characterization are also reviewed.