Speciation of As III and As V in fruit juices by dispersive liquid–liquid microextraction and hydride generation-atomic fluorescence spectrometry

Speciation analysis of arsenic in honey using HPLC-ICP-MS and health risk assessment of water-soluble arsenic

It is well known that arsenic is one of the most toxic elements. However, measuring total arsenic content is not enough, as it occurs in various forms that vary in toxicity. Since honey can be used as a bioindicator of environmental pollution, in the present study the concentration of arsenic and its species (As(III), As(V), DMA, MMA and AsB) was determined in honey samples from mostly Poland and Ukraine using HPLC-ICP-MS hyphenated technique. The accuracy of proposed methods of sample preparation and analysis was validated by analyzing certified reference materials. Arsenic concentration in honey samples ranged from 0.12 to 13 μg kg-1, with mean value of 2.3 μg kg-1. Inorganic arsenic forms, which are more toxic, dominated in honey samples, with Polish honey having the biggest mean percentage of inorganic arsenic species, and Ukrainian honey having the lowest. Furthermore, health risks resulting from the consumption of arsenic via honey were assessed. All Target Hazard Quotient (THQ) values, for total water-soluble arsenic and for each form, were below 1, and all Carcinogenic Risk (CR) values were below 10-4, which indicates no potential health risks associated with consumption of arsenic via honey at average or recommended levels.

Dilute-and-shoot ICPMS quantification of V, Ni, Co, Cu, Zn, As, Se, Ag, Cd, Ba, and Pb in fruit juices based on matrix overcompensation calibration

Analysis of V, Co, Ni, Cu, Zn, As, Se, Ag, Cd, Ba, and Pb in fruit juices was performed by inductively coupled plasma mass spectrometry (ICPMS) after simple 50-fold dilution in 1% (v/v) HNO3-0.5% (v/v) HCl-5% (v/v) ethanol. Ethanol was added to overwhelm native organic components and dominate matrix effects. A universal calibration curve was built based on a likewise treated reagent standard series. This new matrix overcompensation calibration (MOC) strategy was developed to effectively compensated for matrix effects of carbon origin and achieved quantitative (92.5-118.8%) recoveries comparable to those by standard addition calibration (92.1-117.8%) and microwave-aided digestion (99.3-116.8%). The LODs were 0.528, 0.204, 0.195, and 2.07 ng mL-1 for toxic elements As, Cd, Pb, and Ni, respectively, adequate for their regulatory monitoring. Ge, Rh, Tb, and Ir were used as internal standards. MOC renders a calibration curve universally applicable to any clear fruit juices of diversified crop, geographic, and manufacturer origins resulting in cost saving and enhanced productivity.

Arsenic speciation by using emerging sample preparation techniques: a review

Arsenic is a hazardous element that causes environmental pollution. Due to its toxicological effects, it is crucial to quantify and minimize the hazardous impact on the ecology. Despite the significant advances in analytical techniques, sample preparation is still crucial for determining target analytes in complex matrices. Several factors affect the direct analysis, such as trace-level analysis, advanced regulatory requirements, complexity of sample matrices, and incompatible with analytical instrumentation. Along with the development in the sample preparation process, microextraction methods play an essential role in the sample preparation process. Microextraction techniques (METs) are the newest green approach that replaces traditional sample preparation and preconcentration methods. METs have minimized the limitation of conventional sample preparation methods while keeping all their benefits. METs improve extraction efficacy, are fast, automated, use less amount of solvents, and are suitable for the environment. Microextraction techniques with less solvent consumption, such as solid phase microextraction (SPME) solvent-free methods, and liquid phase microextraction (LPME), are widely used in modern analytical procedures. SPME development focuses on synthesizing new sorbents and applying online sample preparation, whereas LPME research investigates the utilization of new solvents.

Collaborative Construction of a Silver Nanocluster Fluorescent Probe Using the Pyridinium-Based Ionic Liquid [C4py][DCA]

A silver nanocluster fluorescent probe was synthesized by using the pyridinium-based ionic liquid [C₄py][DCA] as the protective agent, AgNO₃ as the precursor, and NaBH₄ as the reducing agent. The presence of pyridine group enhanced the fluorescence intensity of Ag nanoclusters and facilitated the coordination interaction between Ag nanoclusters and AsO₃ ^3-. Therefore, the collaborative construction of a silver nanocluster probe using the pyridinium-based ionic liquid [C₄py][DCA] offered outstanding selectivity and sensitivity to detect AsO₃ ^3- in water. More interestingly, the fluorescent probe quenched by AsO₃ ^3- could be recovered with the addition of H₂O₂. This fluorescent probe provided a rapid and superior method for the detection of As(III) in the linear concentration range of 0-60 ppb with the lowest detection limit of 0.60 ppb. The mechanism of fluorescence quenching was a static quenching, considered to be due to electron migration between functional groups on the surface of Ag nanoclusters constructed with [C₄py][DCA] and AsO₃ ^3-.

Hydrolytic enzyme modified magnetic nanoparticles: An innovative and green microextraction system for inorganic species in food samples

In the presented study, the usability of hydrolytic enzyme immobilized magnetic nanoparticles as an extraction agent for the microextraction of metal ions from food samples was investigated. α-amylase modified magnetic carbon nanotubes (α-amylase-Fe₃O₄/MWCNTs) was used as an extraction agent for direct microextraction of trace arsenic from food sample phase into liquid phase medium prior to its ICP-MS determination. In extraction studies using hydrolytic enzymes, it is impossible to recover the free soluble enzyme after extraction without losing its activity. In our study, this problem was overcome by immobilizing the hydrolytic enzyme on magnetic support. In this way, α-amylase-Fe₃O₄/MWCNTs as an extraction agent with a reuse property of at least six times was used. α-amylase-Fe₃O₄/MWCNTs was characterized by FT-IR, XRD, SEM, SEM-EDX, VSM, TGA, and DTG techniques. Optimization of the presented method was performed using 1568 A rice flour certified reference material. Analytical parameters such as type of hydrolytic enzyme, pH and volume of the aqueous phase, extraction temperature and ultrasonic irridation time were optimized. The microextraction step was performed in ultrasonic water bath within only ∼15 min. Limit of detection (LOD), limit of quantification (LOQ) and relative standard deviation (RSD %) values for the developed method were found to be 14.3 μg kg^-1, 47.3 μg kg^-1 and 7.5%, respectively. The method was successfully applied to the analysis of arsenic contents of different rice and flour samples.

Non-chromatographic Speciation of As by HG Technique-Analysis of Samples with Different Matrices

The applicability of the hydride generation (HG) sample introduction technique combined with different spectrochemical detection methods for non-chromatographic speciation of toxic As species, i.e., As(III), As(V), dimethylarsinate (DMA) and monomethylarsonate (MMA), in waters and other environmental, food and biological matrices is presented as a promising tool to speciate As by obviating chromatographic separation. Different non-chromatographic procedures along with speciation protocols reported in the literature over the past 20 year are summarized. Basic rules ensuring species selective generation of the corresponding hydrides are presented in detail. Common strategies and alternative approaches are highlighted. Aspects of proper sample preparation before analysis and the selection of adequate strategies for speciation purposes are emphasized.

Enhanced Thermometric Sensor for Arsenate Analysis Based on Dual Temperature Readout Signaling Strategy

New methods for portable detection of arsenate are still in urgent need. Herein, we explored a simple but sensitive thermometric strategy for arsenate determination without complex instruments and skilled technicians. Cobalt oxyhydroxide (CoOOH) nanoflakes, can ingeniously decompose hydrogen peroxide into oxygen in a sealed reaction vessel, accompanied by marked pressure and significant temperature increase due to the exothermic reaction effect (ΔH = -98.2 kJ/mol). The increased pressure then compelled a certain amount of H₂O overflowing from the drainage device into another vessel, leading to a significant temperature decrease due to the preloaded ammonium nitrate (NH₄NO₃) and its good dissolution endothermic effect (ΔH = 25.4 kJ/mol). In the presence of arsenate, the catalytic activity of CoOOH nanoflakes for H₂O₂ decomposition was inhibited dramatically, resulting in an obvious decrease of the pressure, weighting water and temperature response. The two temperature responses with increasing and decreasing feature were easily measured through a common thermometer, and exhibited an effective signaling amplification via coupling both "signal-on" and "signal-off" temperature readout elements. The obtained dual superimposing temperature readout exhibits a good linear with the concentration of arsenate with a lower detection limit (51 nM, 3.8 ppb). Compared to the inductively coupled plasma mass spectrometry, this enhanced thermometric strategy provides a simple, rapid, convenient, low cost, and portable platform for sensing arsenate in real environmental water.

The speciation of inorganic arsenic in soil and vegetables irrigated with treated municipal wastewater

An efficient method using vortex-assisted microextraction based on a deep eutectic solvent followed by graphite furnace atomic absorption spectrometry was developed for the determination of arsenic species in soil and vegetables irrigated with treated wastewater.

Colorimetric Assay Conversion to Highly Sensitive Electrochemical Assay for Bimodal Detection of Arsenate Based on Cobalt Oxyhydroxide Nanozyme via Arsenate Absorption

This study reports a novel and convenient bimodal method for label-free and signal-off detection of arsenate in environmental samples. Cobalt oxyhydroxide (CoOOH) nanoflakes with facile preparation and intrinsic peroxidase-like activity as nanozyme can efficiently catalyze the conversion of chromogenic substrate such as 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) with the presence of H₂O₂ into green-colored oxidation products. CoOOH nanoflakes can specifically bind with arsenate via electrostatic attraction and As-O bond interaction, which gives rise to inhibition of the peroxidase-like activity of CoOOH. Thus, through arsenate specific inhibition of CoOOH nanozyme toward ABTS catalysis, a simple colorimetric method was developed for arsenate detection with a detection limit of 3.72 ppb. Based on the system of CoOOH nanozyme and ABTS substrate, this colorimetric method can be converted into an electrochemical sensor for arsenate assay by the utilization of CoOOH nanoflake-modified electrode. The electrochemical measurement can be realized by chronoamperometry, which showed more sensitive and a lower limit of detection as low as 56.1 ppt. The applicability of this bimodal method was demonstrated by measuring arsenate and total arsenic in different real samples such as natural waters and soil extracted solutions, and the results are of satisfactory accuracy as confirmed by inductively coupled plasma mass spectrometry analysis. The bimodal strategy offers obvious advantages including a label-free step, convenient operation, on-site assay, low cost, and high sensitivity, which is promising for reliable detection of arsenate and total arsenic in environmental samples.

Optimization of a methodology for determination of iron concentration in aqueous samples using a newly synthesized chelating agent in dispersive liquid-liquid microextraction

The aim of this study was to establish a new dispersive liquid-liquid microextraction (DLLME) technique for the determination of iron concentration in aqueous solutions and fruit juices based on the reaction between iron and 3-hydroxy-1-(3-hydroxyphenyl)-2-methylpyridin-4(1H)-one (3-OH-PMPO) as a chelating agent. A central composite design (CCD) was applied to optimize the effects of independent parameters (pH, volume of disperser solvent and extractant solvent and chelating agent concentration) on extraction efficiency. Under the optimized conditions, the analytical curve is linear in a concentration range of 10-750 μgL^-1 with a detection limit of 5 μgL^-1. The relative standard deviation (RSD) for ten repeated determinations of iron concentrations at 40 and 200 μgL^-1 was calculated to be 4.2% and 1.2%, respectively. Relative recovery of iron in several water samples was investigated and the average was obtained in the range of 91-108%.

Speciation of As(ΙΙΙ)/As(V) and Total Inorganic Arsenic in Biological Fluids Using New Mode of Liquid-Phase Microextraction and Electrothermal Atomic Absorption Spectrometry

In this paper, a new extraction method based on countercurrent liquid-liquid microextraction (CLLME) has been developed for the extraction and preconcentration of inorganic arsenic (iAs) in plasma and urine samples prior to their analysis by electrothermal atomic absorption spectrometry (ETAAS). In this method, firstly, 5 ml of water is added to the extraction vessel. Then 30.0 μl of the extracting solvent is added to it in order for the extracting solvent to be placed in the narrow-necked vessel. In total, 10 ml of a standard solution or a pretreated real sample is added to the sample container and it is connected to the extraction vessel via a connector. While opening the embedded valve at the bottom of the sample container and the one in the extraction vessel, the sample solution flows into the extracting solvent with the same flow rate, leading to the successful extraction of metal ligand into the extracting organic solvent. Under the optimum conditions, calibration curves are linear in the range of 0.1-50 μg l^-1, and limit of detections (LODs) are in the range of 0.03-0.05 μg l^-1. The enhancement factor and enrichment factor were in the range of 220-240 and 198-212, respectively. Repeatability (intra-day) and reproducibility (inter-day) of method based on seven replicate measurements of 5.0 μg l^-1 of arsenic were in the range of 2.3-3.5% and 4.0-5.7%, respectively. The applicability of the proposed CLLME and ETAAS methods was demonstrated by analyzing the iAs in spiked urine and plasma samples. The obtained recoveries of the arsenic in the range of 92-107% indicated the excellent capability of the developed method for speciation of arsenic from plasma and urine samples. Graphical Abstract ᅟ.

Speciation and determination of inorganic arsenic species in water and biological samples by ultrasound assisted-dispersive-micro-solid phase extraction on carboxylated nanoporous graphene coupled with flow injection-hydride generation atomic absorption spectrometry

In this paper, carboxylated nanoporous graphene as a nanoadsorbent was evaluated in two types of ultrasound assisted-dispersive micro-solid phase extraction for speciation of trace As(v) and As(iii) ions in natural water and human biological samples.